Attempting to upgrade to Win 10 I get through the entire process only to have it fail at the end and it gives this error code 80073B92-20009. This is going from Win 7.
View 7 Replies
Not much on the web about this failure. Some threads talk about disconnecting all USB and devices so you just have the core system...really? Should I call MS about this? I'm sure they are flooded with probs.
View 1 RepliesI can download windows ten but when the pc restarts and boots back up it shows the installing screen for a split sec then restarts again and gives me this error.
View 1 RepliesI recently decided to upgrade from Windows 8.1 to Windows 10 and reserved my upgrade. I got my notification recently and started to update today.
But for some reason the update wouldnt Install and it kept giving me errors and saying that another update was in progress even though there was none.
I was confused so I decided to restart my computer only to arrive at a screen saying "keep your PC on until this is done. Installing update 1 of 1"
It has been stuck on that screen for 2 hours and im not sure what to do. My HDD indicator light is flashing but not very often.
When I try to record a game using the Game DVR functionality, it give me an error saying i do not meet the hardware requirements. i have a GTX 980.
View 4 RepliesI'd really like to see what the store has to offer but, I can't access it at all. It just gives me the "server stumbled" and the error code.
I also can't use my micorsoft account at all. Any pre-installed app that you can link an account to fails. I'm really at a loss.
I looked up some of the error codes and found plenty of companies willing to let you pay to "fix" the error.
So, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
I upgraded ok with the update and successfully activated windows 10. I downloaded both 32bit and 64bit to usb using media creation tool as I wanted to clean install Windows 10 64bit on my 64bit compatible machine although am currently running 32bit windows 7 as that's what I had to hand when I built the PC. If I attempt to boot 32bit from usb it returns the error winload.efi missing. If I attempt to boot the 64bit version it just returns to windows boot manager.
Frustrated, I opted for the "reset this PC" function in settings instead as an alternative to the clean install and the reset failed, hung, then returned to the screen "what would you like to do". Once I selected "turn off PC" and it restarted and automatically continued the reset only to fail a second time. This time I choose to "return to windows 10" but it just hung. I had to rollback to windows 7 with repair dvd.
With windows 7 now installed again, I still cannot boot from either the 32 or 64 bit option in windows boot manager when I select to boot from the USB.It either returns to the boot manager or returns the winload.efi missing error.I have tried changing settings in bios to disable secure boot and fast boot but it makes no difference. I've read the Andre da Costa (sp?) wiki steps along with countless other how-to-clean-install windows 10 guides.
mobo: ga-ha81m-dsv2
Error 0xc0000359 winload.efi
For some reason Windows 10 keeps failing to install updates every time, worse yet it won't give an error code .
View 1 RepliesI was upgrading from WP8.1 to W10 and all was going fine but then my internet connection went off for about 1 minute and then back on. Ever since that happened, the phone has been restarting (Nokia logo) and then the cogs are displayed for abt 15 seconds and the phone switches off. It repeats this if the USB cable is plugged in. I cannot use my phone.
View 1 RepliesDuring the week i had the windows 10 upgrade install onto my Toshiba Satellite laptop that was running Windows 7. Windows 10 did open but then crashed as it was booting up stuck in an error reboot loop. So i tried to restore the previous version of windows and it has been stuck in the boot cycle ever since. It will run a continuous loop restarting the process every 10 mins. I can't get it ti get out of this reboot loop. What to try and get my laptop up and running.
View 2 RepliesAfter upgrade Dell Inspiron 580 to win 10 the system boot option F12 seems disabled and the box will not boot from the alternate drives (cd then USB) enabled on the motherboard. F2 still brings up the system motherboard edit.
The failure to boot from cd defeats my drive imaging backup software.
I am unable to find a secure boot option on the motherboard, so I suspect the issue is something else.
My desktop PC upgraded to Windows 10 yesterday morning--very smoothly, no problems. My laptop, though, has shown no sign of upgrading yet. What's more, when I click on "Learn More" in the upgrade window, nothing happens now. Before yesterday, it went through graphics of the upgrade process. Did my upgrade get corrupted somehow? How do I delete everything concerning upgrading and start the process again?
View 5 RepliesI seem to have an issue with one of my system processes using up an inordinate amount of RAM. It isn't causing a lot of issues right now, but it definitely bogs things down here and there. Pictures are of my task manager window on relevant tabs.
[URL] .....
Seems to get worse when I play games. Updated to the Win 10 version of my latest graphics driver (clean install on the driver), and I have restarted my computer multiple times.
I want to try my first Win10 upgrade on a seldom used "backup" PC. This PC is usually turned off. I bring it up for a couple hours each week to update malware definitions, apply maint, etc. In the Win 7 Task Scheduler I currently have gwx disabled. (I have it disables on 2 other Win7 boxes, too.) I assume my first step towards a Win10 update is to re-enable and start gwx. Hopefully that will let me request a Win10 update. (If it doesn't, I'm going to have more questions. )
But then what? I never really understood what would happen next. Does update start as soon as I request it, or does Microsoft schedule the download for some later date - sometime when the PC is likely to be shut off. All the doc I had read seemed to imply a later download, but all of the doc was written for pre-July 29 "reservation". how it works now?
I am one of pioneer users of windows 10. Now I was suggested to upgrade to PRO version. Trying to do so the process was very long and was stuck at 47% of it...after few hours switched off my PC. Lucky after 5 min computer managed to restore my last version....I didn't give up and after few hours tried again and reached same point of 47% done..
View 9 RepliesI upgraded my OS to Windows 10 from Windows 8.1 some months ago. After some weeks I started to have "Critical Process Died" error very often. I couldn't figure out why. I've attached the relevant *.dmp files.
View 9 RepliesI have a Lenovo laptop with windows 8.1 pro. I upgraded to windows 10 pro. After a successful install I checked the desktop, All is fine. Then I rebooted the laptop and received a critical process died error (Blue screen) It occurs after I enter my user name and password. Then it crashes.
I have been able to go back to windows 8.1 and removed any 'questionable" software. i then re-installed windows 10 pro (Same error) This has happened 4 times. The laptop always crashes when signing onto windows 10.
I get these random critical process died BSOD when I'm doing random things -- watching a movie or playing a video game. It happens during internet browsing as well.
View 5 RepliesSeveral times since Windows 10 has been updated (see attached file) I have received a "Critical_process_died" notification. Sometimes at startup & at least one time during normal browsing. Have talked with a local computer shop about various problems & he suggested a clean install. Attached is the dump file per your instructions.
View 1 RepliesRecently while using the internet my computer experienced a BSOD which listed the Critical Process Died as the error. Before this happened my computer kept popping up with a message I believe was saying that the display adapter driver crashed and then was recovered. It should also be mentioned that I recently upgraded my system with a new graphics card, after my old one died, and with a new case. That was my first time ever doing something like that, so I wouldn't be surprised if that could be a problem.
View 3 RepliesMy laptop is Leveno running Window 10. I got BSOD a lot recently, sometimes while using the laptop surfing on the Internet and sometimes activating it from standby. The errors I got were Critical Process Died, 000021a, and kernel error I have uploaded the error files for your interpretation.
View 5 RepliesSo I was playing around with VBS and I screwd up the loop command and made my computer open like 50 mspaint. I hard shutdown my computer and then it just wouldn't boot up. Put me in the fix screen and gave me two options of restart or more advanced. Restart gives blue screen with critical process died, safe mode takes me back to that screen and nothing is fixing it.
View 1 RepliesI've a Dell XPS 15 9550 (512GB SSD PCIe) that gives me a BSOD after at least two hours of uptime. It doesn't create any dump, it only gives me the error on the BSOD critical_process_died. I alredy tried to do various clean install of the OS redownloaded a lot of times and to set from BIOS the drive to RAID in AHCI with various manually installed driver without any result.. I don't know what can I do anymore..
View 2 RepliesI built a computer about 4 days ago and am having constant problems with bsod with all different errors in each one. I don't have any technical information for them, as when I try to download and install things it gives me a bsod. I have gotten the following error messages
Memory_Management
Irql_Not_Less_Or_Equal
Page_Fault_In_Nonpaged_Area
I first put on a pirated version of windows 8.1 Pro. But once i realized it can't get updates I installed a genuine copy of windows 10 that i bought from my local IT shop. I have factory reset the pc twice and it still receives the bsod. I also noticed that when i factory reset both hard drives, it still creates windows.old folders, which should have been deleted.
The windows 10 is installed on a ssd (Samsung 850 EVO 120Gb) and is accompanied by an empty 1 TB Seagate Barracuda (Don't know technical specification).
I have crashed from playing games, running a disk cleanup, when it is restarting from the windows memory diagnostics tool and just watching youtube.
PC Parts -
CPU - Intel Core i7 6700
GPU - Gigabyte GeForce GTX 970 G1 Gaming 4GB
MOBO - ASRock B150M-Pro4 Motherboard
SDD - Samsung 850 EVO Series 120GB 2.5in SSD
HDD - Seagate Barracuda 1 TB 3.5in
Memory - 16G Kit (8Gx2) 2133 Kingston HyperX Fury (DDR4)
PSU - Corsair CS650M Modular 80 Plus Gold Power Supply
Case - Corsair Graphite 230T Case Black
Network Adapter - TP-Link Wireless Dual Band PCIe TL-WDN3800
Peripherals - (Doubt you would need them)
Monitor - ASUS VE248H 24in
Keyboard - Razer BlackWidow Chroma RGB Mechanical Gaming Keyboard
Mouse - Razer Mamba 4G Dual Laser Gaming Mouse
I partitioned my drive to have Windows 8.1 as my daily driver and Windows 10 to play around with. Today when I went to update to the new 10041 build (which did not work, it's stuck on a Windows Defender update and an Intel display driver update) I don't know what happened that now I don't get the screen upon booting my computer to choose between the two partitions. It just boots directly into Windows 10. When I check the Disk Management I can see the other partition is there, but I have no way of booting into it.
View 3 Replies
