At some point in the future I aim to upgrade from Windows 7 to Windows 10, but I'd like to keep Windows 7 on a dual boot or something similar (if possible) for convenience and in case of compatibility issues. However I also want to get a new motherboard and CPU, and from my limited understanding of operating systems that would cause problems for my OS and stored data and such. So I have decided to ask some questions.
1. Is a dual boot with Windows 10 and earlier versions of Windows actually possible, and how would I go about setting it up?
2. Would it be possible to dual boot the OS's across separate SSDs?
3. Is it possible to synchronise the desktop across both OS's?
4. If I have to do so, would deactivating and reinstalling a copy of Windows 7 as simple as following most of the steps in this guide?
5. If I have to deactivate and do a clean install of Windows 7, would it wipe all the files on that drive?
6. Would reinstalling Windows 7 be as simple as installing as normal and then entering my product key with no complications?
7. Is there anything else I should know or do before I start uninstalling and clean installing stuff?
I've just built my desktop and I'm trying to dual boot Windows 10 and Ubuntu 15.04.
I've already partitioned my hard drive, and installed Windows 10 and Ubuntu 15.04, but I'm trying to get to a place where I can choose what OS to start whenever I turn on my computer.
At the moment, I can run both Windows 10 and Ubuntu 15.04 if I go into the BIOS and rearrange my boot priorities, but that's just a huge hassle. Is there a convenient way to choose at startup, similar to how Windows 8 had this?
I have the ESD for Windows 10 built 10240 . I need to clean install it on a different drive and dual boot it with Windows 8.1. Can I simply boot with the 10 ISO (in UEFI boot) and clean install it on a different drive?
Would I then be able to dual boot it with my activated 8.1 copy?
I have Windows 10 installed on HD1 (Samsung) and working will. I had a second HD2 (WD) with Win7 installed for a dual boot operation. For some reason, I could never successfully boot into Win7. Out of frustration I decided to format the Win7 drive and start over.
The problem now is I cannot install Win7 on the HD2 drive. When I choose F12 on boot up and select the WD disk, a screen appears saying "Windows Boot Manager" It instructs me to insert my Win7 install disk an reboot.
Next steps:
I insert the Win7 install disk and reboot using F12 to select the WD disk. The "Windows Boot Manager" screen appears again with the same instructions as above! If I reboot again and do nothing, the system will boot to Windows 10.
My question, how to install Win7 on the WD disk and then setup a dual boot operation?
Okay, I have Windows 10, and Macbook. My PC, have 2 hard disks, one is of 500 GB ( Seagate ) and one is 3 TB Western Digital (Black).
Machine is loaded with: CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler Motherboard: Asus MAXIMUS VII HERO ATX LGA1150 Motherboard Memory: Corsair Vengeance Pro 8GB (2 x 4GB) DDR3-1866 Memory Storage: Seagate Barracuda 500GB 3.5" 7200RPM Internal Hard Drive Storage: Western Digital Caviar Black 3 TB 3.5" 7200RPM Internal Hard Drive Video Card: Asus GeForce GTX 770 2GB DirectCU II Video Card
I am planning to Install Mac OS X on 500 GB one and keep Windows 10 on 3 TB one. So is it okay if I will just remove the 3 TB Hard disk, and install Mac OS X on it ? 500 GB hard disk have files of Windows 8.1 already. But it is not my primary hard disk.
I have dual booting setup on my pc my main system and my development system but to get the development system my computer first boots the main one then asks me which os i would if the main one it goes right to as it already loaded but if it is the development system it will restart and load that, so my pc has to boot twice. Is there a way from the main system some how i can restart straight to the other one. Both os are windows.
Just getting to grips with W10 and noticed that dual booting can be set up in System Configuration-boot. This was the case in XP, I think or was a previous version. Bit late now as I have easybcd on W7 drive. Before you ask I have never had a successful install where W10 finds W7 and displays that fancy box on start up.
I've decided that I would like to dual boot Windows 10 TP (I know im late to the game)
Now ive done dual booting before, but I was wondering if its any different, as my system has change to include a SSD which just has windows 7 and a HDD with my files.
If I just partition my HDD to a smaller size and install windows 10 on the other half of that partition will that work and not affect windows 7
I have a PC with win 10 x64 installed. It is a new PC with UEFI firmware and secure boot enabled, though I can disabled it very easily.
I want to installed Win 7 x86 (32bit) on a second hard drive and have it dual-boot config with the current Win 10. I know I have to disable secure boot for installing 32 bit, but Im concerned about the process of installing Win 7 AFTER the already installed Win 10.
How can I go about doing this without losing access to my Win 10? I need to install win 7 for compatibility reasons.
I have a dual boot 7 and 8.1, which are on separate drives. I'd like to keep 7 and install 10 over 8.1, I have downloaded 10 on usb. My question is do I have to disconnect the windows 7 drive before I try to install 10?.
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
On my HDD i have a Dual boot with Kali Linux and Windows 7, it boots with Grub boot loader. If i upgrade to windows 10 will it only effect my Windows 7 partition or my entire HDD(loosing my Linux partition)?
1. Upgrading does not allow an installation with dual boot option.
2. Windows 7 is gone after one month. If you don't like it, too bad.
3. My "legacy" Dell colour laser printer will not function with Windows 10. It works flawlessly with Windows 7 and getting a new printer gets rid of the saving plus a lot more than the savings of a free W10. I will pass on the "free" upgrade.
I had never had my computer set to boot from USB but I created a bootable flash drive with Win 10 on it and wanted to try it. I set the BIOS boot options to try the CD drive first, then USB, and then the Hard drive. It booted fine but I have a question now.
If I have a non-bootable USB storage device plugged in and either start up or restart my computer, after the BIOS post I get the message, "Missing Operating System" and the whole boot process stops and will not proceed to the Hard Drive. I had assumed it would work the same as the CD-ROM boot where if the media is not bootable, it just skips it and goes to the next option in the list. Now I have found that the same thing happens on my Win 7 machine. Is this normal? If it is, I will turn off USB boot again and just go back to burning disks.
I was wondering what would be the best option for installing Windows 10 is, I am building a new computer and I have a spare optical drive if necessary. I just don't know if the USB version will auto-install windows after I finalize the motherboard BIOS.
My Windows 10 installation does not boot anymore, the PC reboots while it's booting up. I have tried every advanced options available (safe mode, low resolution video...) to no avail. I tried enabling the bootlog but I cannot find the log file when I eventually browse the disk from my windows 7 OS.
I'd like to restore the installation rather than reinstalling it. The build was not the very last one but the preceding one, so not so old.
I'm having a problem with my desktop (win 10) booting whenever I'm using my laptop (win 7 still). Now, I recently moved, so actually have everything on my network now (yippie). Before I had some networked drives mapped to the laptop, so I disconnected those, problem still persists. I just changed power options on the desktop to all (of the power plans), allowing sleep for media streaming, still, same problem. Then just 30 mins ago or something I joined my laptop to the workgroup and the homegroup (I haven't been using it much and been busy with school and work), thinking it may be some thing that clicks with that and gets it working right. Still it keeps doing this! Very annoying and obviously I dont want it to do this (of course the desktop uses a good amount of power and I dont need it on when I want to use my laptop).
May have to upgrade the laptop to windows 10 or do a clean install of win 7 for this to work I guess. I kind of like Win 7 better actually still, but I'll keep Win 10 on the desktop because of DX10. (really the only thing I care for on Win 10 is the new xbox app and of course, DX10, other than that, eh, its okay, would rather have the old start menu and control panel and though I didn't really use it, windows media center).
My pc boots up and loads to my home screen, the icons all load up but the computer freezes, I can still move the mouse around and click on icons but nothing happens. There is a constant loading symbol for my mouse cursor. I managed to get it into safe mode once and ran a virus scan and it detected nothing.
Will my computer boot from my usb recovery drive if cd is first on booting order. If I change the order in Bios will it effect how my computer boots each time I use it?
My issue is, I have a laptop with windows 10 home installed (all legit), I wanted to replace the laptop hdd with an ssd and put the original hdd in an enclosure to use as an external hdd.
This all went well put the hdd in the enclosure and went to boot windows 10 from the now externall hdd and end up getting an error saying unable_to_access_boot_media, I have had automatic repair come up but does not fix the issue.
The external hdd uses a USB 3.0 connections so as suggested in another post I turned the BootDeviceFlag to 0x14 to load the USB 3.0 drivers early but this has not fixed the issue either. Where to go from here?
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
I installed windows on my new hdd (because current is starting to fail). But when i have only that drive connected it just skips it and starts PXE over ipv4. Is there anything i need to do to make it bootable? PS. I had to install it on legacy support
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed.
As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird again - slow startups, random freeze etc.- but it was running ok and I was fine with it. But earlier today, it suddenly displayed BSOD and crashed when it was idle. Now to the main and the funny part, it does not boot anymore. To elaborate, blank screen appears after BIOS screen (right when the logo of windows should be displayed) and it remains blank for several more minutes before the logo and spinning dots magically appear, it doesnt disappear thereafter.
I figured, I could run startup repair or some other tool to solve the problem by booting from the DVD of windows 10. Now for this one, the logo appears with the spinning dots which disappears after a while like it should. And after it disappears, blank screen persists thereafter. Dumbfounded, I tried booting from a USB stick of Windows 8 I had which gave the same problem.
Upgrade from Win 7 64bit to Win 10 64 bit on a Gateway laptop 3 days ago and everything worked well. This morning the laptop hung up in the booting process and wont fully load the OS. I get to the window logo, a greyed login box, and in task bar the clock and battery icon but nothing else. No start button no search and none of the pinned programs. Setup has only one user
I cant get into safe mode with Win key + R so I cant even get far enough in to roll back to a restore point or back to Win7 and I would prefer not to have to do a clean install of Win 7, restore my image and then re-upgrade if at all possible.