Upgrading Windows Screen Stuck At 25% (copying Files 84%)
Jul 29, 2015Windows 10. I'm at the "Upgrading Windows" screen and it's been stuck at 25% (copying files 84%) for over an hour. Is this normal?
View 7 RepliesWindows 10. I'm at the "Upgrading Windows" screen and it's been stuck at 25% (copying files 84%) for over an hour. Is this normal?
View 7 RepliesFirst time running into issues with my SP3. Was able to download the latest build without any issues. Restarted and the overall install is 18% (blue ring has disappeared) and the Copying Files step is stuck on 63%. Been like that for 15-20 minutes or so. Should I wait it out or try to shut my Surface off?
View 5 RepliesFollowed the tutorial, extracted the iso. Ran set up. How long should I let it stay at 0%
View 3 RepliesI have tried to upgrade from win7 to win10 after copying the files and the system restarts, I will get the error 0xc000000f. I have both win7 and win10 disks and the automatic repair would not work.
Apparently this has to to with some bios settings, I have tried to follow the guide but I do not have all the options to described in the guide below.
[Solved] Error Code 0xc000000f Windows 8: A Required device isn’t connected or can’t be accessed
Specs:
Processor (CPU)Intel Core i7 Quad Core Mobile Processor i7-3630QM (2.40GHz) 6MB
Memory (RAM)8GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (2 x 4GB)
Graphics CardNVIDIA GeForce GTX 660M - 2.0GB DDR5 Video RAM - DirectX 11
2nd Graphics CardNONE
Memory - Hard Disk120GB KINGSTON V300 SSD, SATA 6 Gb (450MB/R, 450MB/W)
2nd Hard Disk1TB WD SCORPIO BLUE WD10JPVT, SATA 3 Gb/s, 8MB CACHE (5400 rpm)
I have a gaming rig I bought a month ago. It wasn't set up right, so I'm formatting the drives and starting from scratch. I'm trying to copy 60GB of stuff to a external drive before I wipe it. It's been going for about 6 hours now and stuck at 99%. It says that there is 0 bites remaining, and 25 seconds. It's stuck there and won't change. Should I just cancel it, because 0 bites are remaining I assume everything is there.
View 1 RepliesI got my free upgrade to Windows 10 and I tried installing it. But it got stuck at 24%, copying new files 83%.
View 2 RepliesI had reserved a copy of windows 10 and i was able to download it through windows update. once it is downloaded i was asked to restart for updating. copying files stuck at 0% for 5 min and windows 7 ultimate x64 rolls back.
I can even see an error message in windows update page shows Windows 10 Pro installation failed error 80070006
So I'm upgrading from windows 8.1 to 10 on my HP laptop. And I'm on the "upgrading windows" screen but its now stuck on 92% and has been like that for 1 hour or more. How to fix this?
View 1 RepliesWith Windows 8, if I copy files or folders from one disk to another, a window appears which shows the progress. This is very useful. Windows 10 does not show this window. Is there a way to make it appear?
View 3 RepliesI tried upgrading my windows 7, but failed 5 times.
step 1 on copying files are 100%
step 2 installing features n updates are 100%
step 3 FAILED, it stuck on black screen and freeze, nothing i can do besides force restart and its restored to my windows 7 back.
It's always stuck at 75% step 2 and when go to step 3 is freeze ( 5 times in row, I'm thinking give up or buy new laptop with windows 10)... I'm currently downloading ISO file to blank DVD hopefully it's works....
Black screen and stuck cursor after upgrading to windows 10 on my acer laptop, I've tried all other forums and nothing has worked ...
View 1 RepliesI had music files on my laptop which was running windows 7, but when I upgraded to windows 10 I can no longer find them and the available space is not now large enough to put the music back from an external drive, which leads me to think that these files are still somewhere on my hard drive.
View 6 RepliesI have fear that my files may get dissappear if i upgrade to windows 10 from windows 7. Is it so?
View 1 RepliesAs the title states I have an SSD and HDD setup, now I have set the Windows Documents, Pictures and Music folders ect and the app data on the HDD as you would.
And some programs are on the SSD and others on the HHD.
Will upgrading to windows 10 mess with this or will it just upgrade without putting random bits of it on my HDD.
Is there a rugged copy program that can copy a partially corrupted file (*.mpg) from a CD/DVD onto your H/D? What happens is that when the normal windows copy operation encounters that portion of the DVD that is faulty, it tries over and over again (endlessly, it seems) and then just hangs and I have to reboot, forcing that irritating wait for it to scan the C and D drives on reboot. This occurs with any program I try that attempts to read the entire file from the DVD, such as PowerDVD, windows explorer copy, Media Player, windvd, dos copy, etc. I assume it is because a cluster with a faulty cyclic check is encountered, and the windows read operation can't just accept the data anyway and proceed, but, instead, keeps on trying to reread and getting the same cyclic error over and over again.
What I need is a read option that "accepts" the error, transfers the bad cluster as it came across (errors and all), and then continues until it reaches end of data. I get this when some of my home-recorded mpg movies hang up somewhere in the middle, but, if I know in advance and skip over the bad part, the remainder of the movie plays just fine. I need a program that will ignore the cyclic error and just go on. I know we had this back when I did mainframe programming (the ACCEPT option), so I wonder if there is any windows program that does the same for mpeg files on CD's or DVD"s.
I tried updating my Win8.1 to Win10 twice.
The first time, it hung at 26% total, 89% copying files. Then it bricked my system completely so I made a clean install of Windows 8.1. There was nothing else installed than Windows & Updates.
Tried to update it with a stick made by the Media Creation Tool --> Stuck at 23%, 77% copying files.
I tried everything: Disabled Network Adapter, pulled all Cables (only mouse left) out, I also detached my second HDD.
I am trying to install Win10 on my SSD (Samsung 830 Pro, 130GB). I am running a Z77 Chipset.
I'd love to install completely new with the Image but that doesn't work because of the activation later on..
I'm stuck with a fresh Windows 8.1 install now, that's not really what I wanted. I'd love to update to 10 since I had it as a Insider too.
I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"
View 9 RepliesWith Win7 I used to open one external drive, then through My computer locate the other drive. I would have each drive on its own window. I could then select relevant files on one drive copy and paste into the other drive. With Win10 if I click on File explorer I can open one external drive, where can I locate the other drive to put in a separate window. If I click on the other drive, it just opens it in the same window. Win7 and previous versions used to be so simple.
View 5 RepliesIt says "downloading windows 10"and i get the icon scrolling but then it just takes me to the windows update screen that shows me my current updates are up to date. I've tried this over a dozen times now, even going as far as disabling my windows firewall and ms essentials....still nothing. I've installed the updates that were optional as well as the required ones but it still will not launch. Downloaded the windows 10 update.exe from microsoft directly and it does the same thing as the one in the taskbar. What else should I do? Maybe it's a sign I just keep 7 (ultimate btw) for a much longer time.
View 1 RepliesI just got a new 8tb external drive and this started happening. 2.5 gb file mkv..It'll have a burst of write speed completing 60-80% and then slow all the way to 0 and just trickle the rest, even though it fluctuates from as low as 5 up to 30-50mb until it's done.
View 2 Repliesget stuck on the windows Screen and i have tried to do the factory reset and got an error saying it failed. Just wondering if there is anything else i can try. Other things i have tried is unplugging his computer and holding the power down for 30 seconds then plugging it back in i have tried to do a system restore which didn't work.
View 1 RepliesI rebooted to have updates installed and the percentages completed on both shutdown and boot up.
After the updates completed now when I turn my computer on it just stays on the blue background screen with the dots spinning around in a circle. I'm able to press Crrl Alt Del and get to the screen with ease of access, shutdown, and connect to the Internet, but can't go anywhere else.
Have tried restarting from that prompt as well and it still never gets to the login screen.
I tried to upgrade my Windows 7 laptop to Windows 10 but after it restarted, it got stuck on the loading screen.
Windows 10 (x86 build 10130)
I was updating with mediacreation tool, and it stuck at %93 black screen There is not cursor, says it is configuring settings %75 .....
View 3 RepliesSo, after having this problem for a few months I decided it was time i asked. Whenever I restart my pc for any reason, it just gets stuck on the black screen right before power off. Everything else still works fine, even when I update I just wait a few minutes then hard reset. But this is getting annoying especially when I have the updates that need multiple restarts because I have to sit there and watch it.
View 1 RepliesI'm recently upgraded form windows 7 to windows 10. I'm facing the annoying issue that windows explorer steals the application focus after it finishes copying files and comes to front. Any option to disable this behavior?
View 1 Replies