I recently upgraded to windows 10 and now my verizon wireless "VZ access manager" doesnt work right. It still connects, but When I go to the statistics page the tx rate and rx rate is 0. My laptop which is still windows 7 still works fine.
View 1 Repliesafter recently downgrading and then upgrading back up to Windows 10 I experienced yet another problem. Now I have no remote access connection manager service. This was discovered by a technician via live support trying to create a VPN connection.
The other problem I have is installing virtual machines. Here are a couple of screen captures with the error messages here:
I don't want to resort to doing a complete clean re-installation of Windows just yet. Furthermore I also did come across [URL] and was wondering if that would bring me back to a normal functioning Windows 7 as even downgrading from Windows 10 in the past seemed to have caused some problems.
or a few days now I am unable to install or uninstall anything, do a anti-virus-scan, run anything as administrator, opening an .exe-file or simply opening the Task-Manager. I always get the same error message (see attachment). Except when I'm in Safe Mode.
Avira-Systemcheck in Safe Mode doesn't find anything bad and so I have no clue what causes this and how to repair it.
I have just built a new PC around a MSI gaming 7 motherboard and an i5 Skylake processor, running windows 10.
Everything is running great but I have the following errors in device manager:
Trusted Platform Module 2.0 is not working properly - drivers are up to date.
Corsair Hydro series 7289 USB device - drivers up to date .
I am getting a strange error after *important* downloading windows from a disc that my work provided me. Since I used the copy from my work, I do not have an installation disc anymore nor do I have a repair disc. To make matters worse, I upgraded to windows 10 but I still get this error. To get past it I have just been pressing f12 and manually selecting my ssd from the boot menu, and it works flawlessly from there. Why can't my computer automatically load from the ssd?
This is the error message.
Boot Manager:
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1.Insert your Windows installation disc and restart the computer.
2.Choose your language settings, and then click "Next".
3.Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible ...
I have all my Mp3's stored on an external HD .. .all Ok before I upgraded from 8.1 to 10.
I now am unable to play any of them from one folder ... I can access folder but get error in Win Media Player / Groove to say they cant get access to file with code Oxc00d11d2
I have tried to go to properties / security / advanced & map as per another folder that contains MP3's that play ok ... but no joy.
I have this weird problem that causes chrome and firefox to download some pages (like : [URL] .... please notice this happens only on some websites and not all) instead of simply viewing them. the file that get downloaded isn't even a html file, but an unknown format.
In Internet explorer the pages will show a weird - until i flush the dns cache and then internet explore will start displaying it until the next time (chrome and firefox still wont show the pages), using developers tools I managed to find that the error I get is 407.
My computer is windows 10 (enterprise) and is part of a domain that uses a proxy server. only my computer is suffering from this problem (I checked my user on a colleague computer, and had my colleague test my computer), which is part of the reason I am convinced that this is a windows problem and not a browser problem. It is a clean installed computer so I don't believe it is a corruption, virus or the sort.
so i have recently upgraded to window 10 and im having some issues with my internet. so the problem is that it keeps on saying "no internet access " and theres also a yellow triangle on my wifi icon.I have watch so many tutorials on how to fix this but still havent found the right solution.ive tried things such as reset my router,flush my dns,reset my ip,update/uninstall my driver,changing power options .
View 6 RepliesSince up grading to windows 10 I can no longer access my router setup page. When I type in the address nothing happens the little circle just keeps spinning. I tried chrome and get the same thing. I also tried from 2 different computers, both running windows 10. the router is an ASUS AC router.
View 8 RepliesAlmost everything time I try to access my htpc that has shares I get this error. I just keep clicking the folder and it will finally let me in. The PC is up and running so not sure why this does this almost everything I try to access the share.
My PC is windows 10 pro the HTPC is win7 ultimate.
Since the W10 upgrade i cant save to any Photos, Document or sub folders of the like. I get the error in the photo. Its the same error I get from any sub folder as If its trying to save to a different user. I tried was under properties of each folder ticking the read only box at the bottom and that didnt work.
View 6 RepliesCannot access existing calendar in Outlook since Windows 10 upgrade ....
View 1 RepliesEverything about my network worked fine on Windows 8. With Windows 10 I have been unable to access PC's on my router. Internet work fine, I see the PC's on network in homegroup, But gives me the dreadful and nonsensical error:
Worth noting that my windows 8 laptop can access these computers no problem. but my windows 10 pc's can access ANY pc's
Tried Everything
Winsock method
all elevated cmd prompt exe's
tcp4/6 config
drivers config
network settings configs
I am left with no choice but to go back to windows 8 ?
Windows 10 Pro.
Administrator.
When trying to access the WindowsTemp folder, I receive the prompt informing me that, "You don't currently have permission to access this folder."
I click the continue button and receive the error message, "You have been denied permission to access this folder. To gain access to this folder you will need to use the security tab."
I do just that.
Properties --> Security --> Advanced --> Continue
Creator Owner, Administrators and System all have Full Control. Users has 'special.' So I adjust Users to have Full control.
I receive the error: "An error occurred while applying security information to: C:WindowsTemp. Failure to enumerate objects in the container. Access is denied."
I click continue and get this error, "Unable to save permission changes on Temp. Access is denied."
I have my phone running windows 10 and I don't know why the internet data is not working. It keeps telling me that there is an error with the access point, it says that turning off and on the phone would solve the problem but i have done everything like a thousand times and nothing happens. I can't be on wifi all day.
View 2 RepliesI recently upgraded to W10 and now when I try to change a form in Access 2010 DB It errors and has to close. The error is : Faulting module path: C:PROGRA~2COMMON~1MICROS~1VBAVBA7VBE7.DLL. If I undo the change then all is fine. There was a problem I found on Google with same error but due to SP1 for office. I
View 1 RepliesI have just accepted a free upgrade offer from Windows 7 to 10. I am now offered a login page with a demand for a password which I do not have and which I am not allowed change without a USB flash drive which I don't have. I now have no toolbar with which to access other sites or programmes and am having to write this post on a different laptop.
View 1 RepliesI have a Dell M3800 and a work colleague has a Lenovo something, both pretty new. We have both upgraded to Win 10 and have no internet access. We can see our wifi devices in device manager, but no wifi shows up. Direct wired connections also don't work.
I have win 10 on 2 pcs and an old laptop, all with no issues.
I have a brand new gaming computer with Windows 10 and have been trying to run LOTR Battle for Middle Earth which is a relatively old game from the Win 2000/XP days. The game loaded fine but when it tries to start up the game it fails and comes up with the following Exception error:
EXCEPTION_ACCESS_VIOLATION
The thread tried to read from or write to a virtual address for which it does not have the appropriate access. Access address 0x000e9fb8 was read from.
Location : 77dbe48b ntdll. dll+0x2e48b, RtlSizeHeap+0x295b
I am having a weird issue with OneDrive. I have gone thru the update and selected the folders to sync (god, I miss the place holders). Now every time I'm offline I try to access a file in those folders I get a error "File system error (-2143326205) ". I have the checked if the folders are up to date and all files are downloaded and they are. I am able to access the files if I'm online.
I should also mention that I am using a SP3 i3 and I have my OneDrive folder in on my SD card mounted into a NTFS folder on C:
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7.
But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart Now. But I have no option to Use a Device. If I choose Troubleshoot then Advanced Options, the subsequent screen has no option for UEFI Firmware Settings.
I've disabled Fast Boot through Power Options in the Control Panel, then tried F2 and the Delete key when starting. Nothing...
The fact that I can't do something that was so easy in Windows 7 is enough reason in itself to remove 10. Throw in the fact that the scanner part of my printer no longer works is just icing on the cake. I have the Windows 7 disk. I just can't figure out how to use it.
The title says it all. When attempting to restart my Base filtering engine service I get an error 5 access denied.
A bit more information: it then says the following programs will be restarted:
Windows Defender Network Inspection Service
Windows Defender Network Inspection System Driver
Internet Connection Sharing (ICS)
IPsec Policy Agent
Windows Firewall
IKE and AuthIP IPsec Keying Modules
Once I click okay, the Error 5 message pops up
Im trying to install windows 10 final on my ASUS x205ta, but the problem being that it has a 32GB ssd, and there is nothing on it but the OS, yet i still have the error of it saying there is not enough space, what should i do?If i get the ISO and install it that way will i still run into these problems? Plus i dont know my product key since it is a free upgrade and windows offered it to me? Is there any way to do this? I hate windows 8 and much prefer windows 10,
View 1 RepliesI have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
I am now getting a new error. The error i am now getting is error C1420127 windows 10 now installs almost but towards the end it stops and says error and then when i go to look at it that is what the error is.
View 9 RepliesUsing the media creation tool (both usb and ISO) I get an error. Something like "installation has encountered an error during first_boot with sysprep." In not at my toshiba laptop at the moment so the wording may be a little off. Upgrading from my 8.1 current os. I just read about removing my eset antivirus before upgrading so I will remove that and my malwarebytes program as well and try again.
View 2 Replies