Volume Shadow Copy Service Not Set To Automatic Start On Installation
Aug 29, 2015
I just discovered that none of my computers have the Volume Shadow Copy service running and none have the startup set to automatic. I have always assumed that this service should start at boot time. I have started the service on all the computers and set the startup to automatic. Shouldn't that have been the state set by the installer? The manner of installation doesn't seem to be a factor because some of the computers were upgraded via GWX and some were upgraded and then clean installed afterward. I have reported this via the Feedback app.
I have never seen anything like this. I noticed the volume icon was missing so I went to go activate it, but the icons are all switched around. It also says "Audio Service is not running" but I checked under "services" and it clearly is (and I can hear audio!). I even restarted it to be sure.
The problem is that the volume of different sources of sound, for example YouTube, gets reduced if I turn another difference source of sound, for example League of Legends. So, once I play League of Legends, my YouTube music gets reduced. If I first run League and THEN YouTube, then YouTube gets reduced, if I first press PLAY on YT and then go to League, my League volume gets reduced.
I don't know what the hell is going on and I hate it. I have Windows 10 Pro and I have tried the "Do Nothing" option at sound settings. I have checked out every single tab on sound settings and nothing works.
This problem started once I installed W10, it worked fine on W7.
I recently upgrade to windows 10 and so far everything is great except. My Windows update wont download the updates it only gives me error 0x80246008. So I tried to solve it on my own by using these steps.
I suggest you to try to manually reset the Windows Updates Components and check.
Please follow the below steps to reset the Windows Updates Components:
1.Press Windows Key + X on the keyboard and then select “Command Prompt (Admin)” from the menu.
2.Stop the BITS, Cryptographic, MSI Installer and the Windows Update Services. To do this, type the following commands at a command prompt. Press the “ENTER” key after you type each command. net stop wuauserv net stop cryptSvc net stop bits net stop msiserver
3. Now rename the SoftwareDistribution and Catroot2 folder. You can do this by typing the following commands in the Command Prompt. Press the “ENTER” key after you type each command. ren C:WindowsSoftwareDistribution SoftwareDistribution.old ren C:WindowsSystem32catroot2 Catroot2.old
4. Now, let’s restart the BITS, Cryptographic, MSI Installer and the Windows Update Services. Type the following commands in the Command Prompt for this. Press the ENTER key after you type each command. net start wuauserv net start cryptSvc net start bits net start msiserver
I was wondering whether it were possible to open the volume mixer instead of the volume control when left-clicking on the volume icon in the tray. At the moment I have it set to open the old classic menu, but not the volume mixer.
my game volume and my chat volume are mixed so that when I turn up my chat volume, my game volume also turns up. when I turn up my game volume, it doesn't turn it up, but when I turn up my chat volume, it turns up both my game and chat volume. How can I fix it so that my game volume and chat volume are different?
After running windows in safe mode to test something my firewall stopped working. I could not find anything related to this issue on Win10. When i try to initialize windows Firewall service i get the message error 1068 and when i try to run it through Control Painel i get another message error with the code 0x8007042c.
There is event log saved on my pc everytime i start windows (ID 7001). I also cannot run SFC /scannow anymore.. this is getting annoying.
When I had Windows 7, I had literally every single thing in My Documents. Every song, every file, every tax record, every picture...literally everything. That way, when I backed up my hard drive, I just plugged in the My Passport Ultra drive, synced it with My Documents, and everything backed up.
But in Windows 10, I'm seeing Frequent Folders that include ThisPCMusic and ThisPCDocuments. So I figured I would just drag the music folder into the Documents folder, and it would just create yet another subfolder within Documents (other subfolders within Documents include "Resume", "Travel Info," etc. So I figured "Music" would just be another subfolder, as was the case with my Windows 7 setup.
Instead, it made a copy of the music folder, which is not what I want. I want to actually migrate the Music folder into Documents as a subfolder. I thought that maybe I could just copy it over and delete the original Music folder, but what if the copy doesn't work because the original version has been wiped out.
So, this last update seems to have killed the start menu again. After reboot, it might work, it might not, but not too long there-after it just quits working all-together if it was working before. Same with search and Volume toggle. Dang! Mines an AMD machine which is perhaps a factor.
Earlier today I tried to rebuild the windows search index, only to find out that I currently have no locations indexed. I also cannot modify to add any new locations. Windows search troubleshooter shows the following results:
I went to services and tried to start the windows search service, only to be given an error message about the path specified not existing. This doesn't make any sense because I can literally see the windows search executable:
If I clone a disc with Acronis true home image . Does it just copy programmas and apps I have installed? This would save me a lot of time if this is true. For example if I have Windows 10 Home installed when I backed it up and installed pro, would it keep my windows 10 professional licence and Office Etc. On to my new install.
After recent Windows 10 Update, my wireless connection no longer works. I've done some troubleshooting and I have ruled out my ISP, cable modem, and router, leaving the issue to be something within the computer (Dell laptop - Inspiron 7537).The wired connection works fineWhen I run Windows Network Diagnosis, it tells me that the Windows Wireless Service is not running (see attached pdf report).
When I try to manually start the WLANSVC service, i get an error message that says "Windows could not start the WLAN AutoConfig service on Local Computer Error 193:0xc1" (see attached)When I try to manually start the WLANSVC service from the command prompt (as Admin) I get a slightly different message that says "The WLAN AutoConfig service is starting. The WLAN AutoConfig service could not be started. A system error has occurred. System error 193 has occurred. *** is not a valid Win32 application." (see attached)I've downloaded the latest Intell PROset Wireless drivers from Dell (V18.20.0.9) for the Wireless-N 7260 wireless network adapter and have uninstalled and reinstalled the drivers.
Yesterday morning after booting my computer, I experience the "your start menu isn't working" bug. I contacted Microsoft support and they still do not have a fix for this well-known failure. I checked my Update History and saw that an automatic update had been installed. Restoring from my last restore point resolved the problem. The culprit was "Update for Windows 10 Version 1511 for x64-based Systems (KB3140741)".
I noticed that an encrypted esd file of Windows 10 always has the "Windows Setup Media", "Microsoft Windows PE" and "Microsoft Windows Setup" volume images.
What are these volume images? What are their differences?
I've got a slideshow of images set as my desktop background, and under the Personalization settings for Colors I have the three settings "Automatically pick an accent color", "Show color on Start, taskbar, and action center" and "Make start, taskbar, and action center" all switched to On.
The problem is the accent color selection does not automatically refresh when the slideshow rolls to the next image. I have to either send the computer to sleep and wake it up, or toggle the "Automatically pick an accent color" slider in order to get it to refresh. Needless to say this is pretty impractical and I end up just sitting through the whole day with an accent color that only matches the first image of the slideshow.
It looks like the super-thin window border telling you which window has focus is still updating color correctly, but nothing else, anywhere, does at all.
I have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
So I finally made a .iso file for W10 Pro x64 and started installing it. Everything went smoothly my PC restarted 2 times. But when it got to 81% (in total) while "Installing drivers and features" it resterted for the third time and then it started giving me the "Preparing automatic repair" and then "Diagnosing your pc" stuff. I was able to launch the automatic reapair and roll back to W7.
I learned how to perform the clean install of Windows 10 after the upgrade. The problem is after I'm finally at the desktop. There seems to be a background process of installing the realtek drivers and Nvidia drivers. But Windows update will also detect the Nvidia drivers and install them as well. But they fail every time.