Want To Upgrade - Windows 7 Programs Split Across Two Drives?
Jan 17, 2016
I currently have Windows 7 installed on a 128 GB SSD (C drive), which also houses my more "essential" programs and the Users folder.
I also have a 1 TB HD (E drive) which I installed the rest of my programs on (though, the registry still remains on C) and also contains most of my personal data. I moved the My Documents, My Music, etc. from C to E.
If I decide to upgrade to Windows 10, will the installer detect that I also have programs on my E drive? Or does it only look at the primary drive, my C drive?
I recently upgraded to an SSD, I don't know if this is related.
While my PC was idle, it shut down for some reason (probably updates). I came back to an "Updating Windows" screen -- the exact screen used when installing, that big circle icon with a percentage. I have never had a computer boot to that on its own, but I assumed it was some important update. I let it do its thing.
Later, I came back to it doing this strange boot loop:
Motherboard splash screen Normal W10 loading icon Screen flash A second, slightly larger loading icon
The "Updating WIndows" screen. Starts at 0%, raises to 75% a split second later, then disappears and turns off. This happens in about 1/5th of a second.
I booted into a startup repair disk, and ran startup repair. It said it couldn't fix issues. Next, I ran a chkdsk, there were issues it fixed but the boot loop is still in place.
Since I just installed an SSD last week, I still have my previous disk with the operating system still functioning. I booted it up, turned off automatic updates, and checked to see what may have caused this on my current disk. There were 2 updates available: A flash player update for IE, and Windows 10 version 1511 10586. I assume it is the latter, but how it installed, since I DID NOT AUTHORIZE THE INSTALL. Automatic updates are enabled, but I would have thought it'd install in November, when it was released (not 2 months later!)
I don't dare install it on my backup, in case I have to re-clone the SSD.
You know how hitting windows and then typing in a program name brings it up? How do I bring the programs from another drive? I'm okay if that means ONLY bringing up programs that the other drive.
Since upgrading from 7, none of my hard drives are listed. The entire category is missing, all I see are Folders. The drives are there and accessible if I explicitly navigate to them, such as "C:", in which case my path becomes: > This PC >SYSTEM (C:), and I can explore the drive. They are all properly listed in Disk Management, where I can choose to open an explorer folder on them. The ones configured as shared still appear on the network. But none of several internal and external drives are listed in This PC.
I recently upgraded my PC with an SSD and installed Windows 10 onto it. I still have my old HDD attached with all my old windows files, etc. I was wondering if there is a way to basically re-activate my programs that were installed on my old HDD. I would like to be able to manage them in my control panel.
Before installing Windows 10 I clean reinstalled my Windows 7 onto a new SSD but inadvertently left my BIOS boot drive as my old HDD. Now I find that I have my windows 10 boot files in the HDD and the rest of the OS on the SSD, so I am still dependant on that old HDD. It's quite old, and I tried to swap it out to a new HDD but found this issue.
I've tried BootRec /RebuildBcd, BootRec /FixMbr and BootRec /FixBoot, rebooting the PC between each, but without success. I want to make the SSD bootable, what have I missed?
I have an HP Split X3 Tablet/Laptop (13-m110dx) that I just recently updated to Windows 10 Pro.
All is going very well with it except video playback from anything such as Plex or YouTube. What happens is: The video will start but will just keep looping the first second of the video while playing really choppy sound.
I have done the following: Installed the latest drivers from HPInstalled the drivers that were used on Windows 8.1Uninstalled all Windows UpdatesDid a clean install of Windows 10 Pro
I'm suspecting that it is the 'Intel Chipset Installation Utility' that is messing it up.
I recently have noticed that windows 7 and I just upgraded to windows 10 via the free upgrade, will not show all my hard drives ? On start up they show for a few seconds then go away. Both are WD. One is 500 gb, and the other is a new 1TB. I am not sure when this started but noticed it just recently when I tried to access my pictures on the 500gb drive. I have tried just about everything here with no luck. The 500gb drive does have a windows vista OS on it but the 1 TB is just for back ups etc. All was fine some time ago but now, all I see is my SSD with my OS and an external drive. Also the Hard Drives do show up in Bios. I might have found a reason this happens. Most likely on a windows and / or driver update. On my system the drivers for these missing Hard Drives you can see them in device manager by selecting view / show hidden devices.
Just wanted to reduce c size, used aomi freeware to split c, after restart laptop just won't boot, how can i solve it, is there a chance to keep all data?!
After several hours on my pc i open a windows explorer window and this comes up;
Now if i open up a new explorer window on top of that this comes up;
If you notice the icons are gone, if i close both windows and open a new one it starts over from the top.
Other issue is if i click on properties on files like images no property window comes up, i bet there is more but this just happen an hour ago. Everything works apart from that, bluetooth headset, games, videos, browsers, email etc. and... windows search doesnt work, doesnt turn out any results even if i search for something like notepad
This morning I tried to login to my windows machine, windows 10 pro, intel i5 3.30ghz, 12gb RAM, 2TB HD. and kept telling me password was incorrect. I then removed windows password thru other admin user, and now all external hd's except for c: drive all lecked by bitlocker. Never installed or activated it.
I have 2 internal sata drives and 2 usb drives locked. I have gone to control panel, bitlocker, and tried to unlock drives, tried to do a search for key id on pc and nothing is found. My raw files are in the backup drives.
When I click on the store it opens for a split second and then closes. I tried the wsreset.exe but i get this error ....
I also tried some other powershell commands that were suggested by others on some sites but i get the error that 'AppxManifest.xml' file was not found.
How only the top half of names in the toolbar shows up. Mozilla forum referred me to you thinking it may be operating system because it occurs on many of the websites I visit, not just Firefoxes toolbar. Please see attached examples.
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
plugged in USB thumb drive opened windows explorer right clicked drive scan with windows defender and it said scanning pc but it never shows any options so I dont know if it scanned pc or usb for sure why or not
My Windows' acting up, tried every trick in the book to fix it and no dice, so I'm taking the easy yet bothersome route of reinstalling everything. Again.
But Windows 10 has a "Reset this PC" option under Settings > Update & Security > Recovery (screen cap for clarity) which in practical effects, it's what I need, but faster and less bothersome.
Problem is, I have more than one (physical) hard drive on my system, and I don't know if Windows will restrain itself to formatting the system drive or if it'll format all drives present.
And I'd rather ask a relatively dumb question than risk losing all my backed up data XP.
When ever I walk away from the computer for a little while, when I return all more programs have closed. I'm not sure what minimum amount of time passes before this happens but after an hour it's always displays this behavior.
Windows Search returning no results on one of my external harddrives. I have already:
Tried indexing the HDD and rebuilding.Non-indexing and rebuilding.Indexing only specific folders on the HDD and rebuilding.Specifically disabling indexing for this drive in the drive's properties.Checked that I have the appropriate permissions on the drive (they are identical to my other HDDs).
Crude example of my problem:
I am looking for the following file, A:Example est.txt.I am inside the A:Example folder.I search for "test", "*" or "txt".It says there are no results.
And it says "no results" instantly - it doesn't appear to even try.
I do not have a second drive with sufficient space to move the contents to do a format - so I'm looking for non-destructive solutions.
I can download windows ten but when the pc restarts and boots back up it shows the installing screen for a split sec then restarts again and gives me this error.
I have recently upgraded from 8.1 to windows 10 after it finish installing I reset my computer(Via the recovery tab). I then started installing my programs and everything was going well, but when I logged in the next day I couldn't open Task Manager or the admin command prompt(the normal one works fine), my windows update also takes forever to search for an update and nothing ever happens. It seems to be something wrong with the programs that require admin(I am the only user on the computer so I have administrator functions). I have some error messages but there are a few more. Here are a few: 'This program did not respond in a timely fashion', 'The service cannot accept control messages at this time' and I will attach a screenshot of the longest one.
In task manager I can see all programs which are supposed to start together with windows, however, none is starting. Every time I start windows I have to start these programs manually.
I have tried to install the latest version of a program that I had installed in Windows 7 but the installation process said that a previous version was still present. The install app offered to uninstall the old version but for some reason did not install the new version. When I tried to install once more I got the same message. I have attached a snip-it picture of the message.
At the far bottom left corner of the desktop resides the Windows 10 logo. It is suppose to open to a menu of 3rd party apps and Windows functions.
When I click the icon with a mouse, the menu screen opens for a split second and the immediately closes. This does not allow me enough time to open any 3rd party program on the menu or to employ any of the listed Windows 10 apps.
This also means that I do not have time to click on restart or power down and must do a hard shut down pressing the power button on the computer case.
This started a few days ago and is reconfiguring most installed programs every startup. Is this necessary since it consumes resources and delays full usage. If not necessary, how to I put a stop to this? I have a newer Dell desktop running Windows 10.
My laptop did an automatic Windows 10 update Friday and restarted but no program will open now and I have to hold the on key to restart it. I get about 15-30 second after it comes up to click on something and it might open but will stop responding shortly after. I have got task manger to open once and only AVG was running but it frozen before I could click on anything.
I started in safe mode and removed the last window updates only to had them reinstall when it restarted.
What at can I do? Is this a virus or malware or did the latest update do this?