What's the capacity of OneDrive on Win 10 Pro x64? I see it in the Users folder. If you save a backup disk to OneDrive, from a non-system disk on your system, does it take up twice as much space on the PC's storage? If so, then the folders and files would be in three places. Or, is it that the files and folders are on the cloud and just the non-system disk?
Pretty much exactly what the title says. After upgrading from win7 => win10 I migrated over to an Samsung 840EVO ssd with 500gb capacity and before I knew it, the capacity was almost already full. I scaled back some of my media storage to an external HD but I still want to minimize this partition.
Basically, why is this partition so big? Surely a recovery sector doesn't need to be that big... and secondly how to scale this back if its even possible (preferably without having to wipe the drive and re-formatting/partitioning it) Its currently ~100% free.
I recently upgraded my desktop from Windows XP Pro to Windows 10 Pro but have had no luck yet accessing the data on either of my two external HDDs even though my system is fully updated with Threshold 2.
The external HDDs are as follows:
WD My Book 1TB (USB 2.0) NTFS Hitatchi Touro Desk Pro 2TB (USB 3.0) NTFS
Neither appear in File Explorer but they are correctly identified in Devices and Printers. They also appear in Disk Management but are listed as “unknown” and “not initialised”. I get an I/O device error if try to initialize them using MBR or a “disk is not convertible because the size is less the minimum size for GPT disks” error message if I choose GPT.
I have also tried plugging the external HDDs into different USB ports (both 2.0 and 3.0) and re-installing the "USB Attached SCSI (UAS) Mass Storage Device" driver in Device Manager but all to no avail.
I know both my external HDDs still work fine as they were recognized and readable when I tried them on a different Windows 7 machine. I am also fairly confident that the Windows 10 installation is OK on my target PC as I did a clean install from a bootable ISO file.
I read somewhere that Windows 10 may have an issue with external HDDs over a certain capacity, and sure enough, when I hooked up an aged 250MB external HDD it worked straight away, no problem.how I can get Windows 10 to recognize external HDDs with a higher capacity?
I have 3 HDD's (2 internals (1 SSD 120 GB and 1 HDD-Sata 200 GB) and 1 external USB HDD (2 TB)). I have installed Windows 10 Pro x64 final οn the SSD 120 GB without problems and i have installed the extra programs that i use, also without problems. Then i decided to make an image backup to the external USB HDD. The image created succesfully. After that, i have removed the SSD 120 GB, installed the HDD-Sata 200 GB and tried to check to the HDD-Sata 200 GB if the Windows image recovery works. I used the Windows installation DVD and the external USB HDD to do the recovery.
The image recovered normally and the HDD works like as if i was using the SSD 120 GB. So my problem now is with the capacity of the HDD-Sata 200 GB which is shown as 120 GB. So any way to restore the capacity of that HDD again back to 200 GB? I don't want to format the disk now, just continue to use it as a backup disk just in case of failure of my SSD one. I know that i cannot use the HDD Capacity Restore Tool, because it is working only with 32-bit systems (which i currently don't have one right now) and even if i use it i don't know if it will restore my disk to full capacity but in a state that requires format from the begin (something that i am trying to avoid).
So in general, my question is how to restore the capacity of a hard disk after image recovery (when you backup to a new hard disk with capacity bigger than the capacity of the disk that i want to backup).
It seems as though Windows 10 can add some, but not necessarily all new or detected partitions to an aggregate capacity under the label This PC (C: ) Even if the partitions are empty NTFS or RAW (inc. Linux Swap?) also include them as usage: 'System & reserved.' I haven't able to discern a pattern of how Windows 10 determines if a new or empty formatted partition will be added to the aggregate Storage summary. At best it's confusing, and appears to be broken.
Further: deleting some partitions, or shutting down, unplugging disks and rebooting does not necessarily alter the reported aggregate that is shown for This PC (C: ) i.e. You would expect removing all drives and partitions to restore This PC (C: ) status to show only the Windows partition capacity - it doesn't and it continues to show 100s extra GB that are no longer present on the PC.
E.g. on my previous install I was seeing an impossible 239GB 'system & reserved' with 323GB 'capacity.'
My system:
Windows 10 & 7 partitions each = 100GBWindows disk total capacity = 223GBOther disks, mix of NTFS, EXT4 (Mint 17, /home) Swap (Linux)
N.B. I've tried this a couple of ways with fresh installs on clean disks and see the same result. It doesn't make a difference if Windows 10 or Windows 7 is installed first. I have made the partition order:
recovery|efi|msr|windows|other
Other things that make no difference:
Removing or assigning new disk lettersFor both Windows 10 and Windows 7:
Hibernation is disabled (from admin cmd terminal)Page-file management to be on C: only (other disks set to none)
At the moment I am unsure if this is merely a 'cosmetic' issue or something that might cause more serious functionality problems later e.g. not being able to install since Windows incorrectly thinks a drive or partitions are used or reserved.
I use DOS (specifically the WinZip Command Line Add-On) to backup my files. Have been for years and years. I can't figure how to address OneDrive in my .bat file. Can it be done?
I am trying to disable OneDrive & every time I type in "gpedit.msc" I get a message that Windows can't find it. Surely there has to be a way to disable it isn't there.
I'm running Windows 10 Pro x86_64. My little cloud icon says, "not signed in". I'm signing on my computer with my Microsoft account and OneDrive gives absolutely no clue to any of this. No way to sign in with OneDrive and my normal account is fine.
As I don't like the "big brother is watching you" spect of the automatically sinc with OneDrive and as I get a "Pro" version, I don't want to use OneDrive anymore (except the pro version for some few folders).
So I started to organise my documents in the folder: C:/Users/myname/Documents
But I can't put it in the "Quick Access" as there is already the Documents which are located in C:/Users/myname/OneDrive but which is empty for me...
I also hardly find my documents when I download a document, as the OneDrive folder is "dominant".
Some screens to explain my issue...
So I would like to "replace" the "Documents" OneDrive Folder shortcut by my "true" Documents Folder.
OK so I installed and have been running W10 today. I noticed that I did not have a Quick Access link to my OneDrive. So I went to Programs and Features and found it in the programs list. I clicked on it thinking it would open up and allow me to change the settings. OOPs! It uninstalled OneDrive from the programs list. Now I can't find it anywhere on my computer, other than when I log in on the web page. So can I reinstall OneDrive and have it show in my file manager as a drive like it used to in WIN 8.1?
I had my systems set up to store a copy of the stuff I had on OneDrive on the local PC's under Windows 8.1. Since I upgrade to W10 that option has disappeared? Am I missing something? I have Googled and Binged and can't find anything specific to W10 and the W8 explanation ain't there no more in W10! I really liked the ability to access my OneDrive Stuff if/when the internet is down.
I had recently encountered a strange problem: time by time I am getting logged off from OneDrive and Cortana. I just turn on my PC and a OneDrive greeting window appears, welcoming me to log in and set up sync, just like I never did it before. The same problem with Cortana - she just randomly turn off and I have to set her up (entering my name, adding interests, weather e.t.c.).
I was wanting to do the same (remove the very annoying OneDrive) and while searching around the net I came across this. Note the very first post with the Batch file to remove the OneDrive from your Windows 10 install. I do not take credit for it,
When I start the computer I get a Nag Message from OneDriveto Set Up OneDrive. I want to disable this nag message because I"m not sure I want to use OneDrive right now. How do I stop this message from appearing everytime I start the computer?
So, I am just now getting around to trying to solve this problem due to the fact that I am needing to use the computer that has this problem at the moment. When ever anything that would put crap in My Documents (I.E. Rockstar) it instead goes to onedrive. The System will not let me change the setting on where documents get saved automatically. when I try to change it the selection box just goes blank. if I try to select "This PC" again it will then show up, however if I go away and come back the setting is back to saying "OneDrive".
New on here a just taken plunge with w10. Not bad at all on this Surface Pro 3.
In windows explorer there is an option what folders to show and synchronise. It used to be that the file 'impression' was there but the actual file on the cloud. It now seems that to have them visible they have to synchronise and this means they actually download to local HDD. All I want is to see the files and when I click on them they come down from cloud and attach to email etc. This particularly important for pictures. Because these and medic are huge I don't 'synchronise as they would all come down locally.
So, how do I see the available files in OneDrive via Explorer without actually having them on hard drive locally.
In Windows 10, I already have folders for Music, Videos, Documents and Pictures. Why can't these folders be synced with OneDrive? It would make so much more sense. Instead I have to create separate folders in my OneDrive directory in Windows Explorer with the same names, doubling everything up.
Lately OneDrive appears as one of the applications installed on my system; and the Windows Exprolorer lists it among the content of the system.
As shown there, it appears to contain a single file (or feature, maybe not a real file) with this name: .849C9593-D756-4E56-8D6E-42412F2A707B. Clicking on this just opens an empty Notebook and nothing else happens.
- How can I get rid of this application, as it seems quite useless, and I'm not aware of having installed it myself?
I cannot delete the file mentionned because a process keeps it open, a pop-up says. I cannot uninstall OneDrive because that option is disabled on the list of applications.
- And what is this OneDrive application anyway? It doesn't seem to be the same thing as OneDrive, the storage space in the cloud, which I use regularly, and performs all right.