What Size Of Media Card Will Create Recovery Disk
Jan 6, 2016What size usb drive do I need to create windows 10 recovery disk....
View 1 RepliesWhat size usb drive do I need to create windows 10 recovery disk....
View 1 RepliesI am using a small tablet with Windows on it. It already has little space (32GB which is actually 29 GB), with Windows eating up a ton of space. Now, with a virtual partition on the tablet reserved for system recovery, I have less than 5 GB left, not enough for Windows to update. I would like to merge the virtual partition so as to get ~5 GB extra space, in or to do so I would like to make a recovery disk on a SD-card.
The problem is, Windows does not seem to recognise the SD-card when I try to make a recovery disk! Is there a workaround, or did I get the SD-card in vain?
I originally purchased Windows 8 and upgraded to 8.1. I installed the Windows 10 upgrade via the downloadable Windows 10 Installation Tool and burning the ISO to a DVD. I understand that this will work to upgrade my system should I need to recover but will this still work after the 1 year free upgrade period? Also, how to confirm if the ISO downloaded via the Installation Tool will work as a repair disk to recover using a system image? If that's the case I would be content with that, as it's how I've always done backups since Windows 7.
View 6 Replieshave a new dell inspiron 15-55580 with win 10 installed at factory. unable to create a recovery media drive using usb drive (16 or 32 GB). receive error message: a problem occurred while creating recovery drive."
View 1 RepliesI recently purchased a new Windows 10 laptop (HP), which I presumed is a 'clean install' and I'm mooching around looking into how to create a recovery disk. Anyway, when I go into control panel, underneath System and Security I see a link that says; Back up and Restore (Windows 7).I'm wondering why there's a reference to Windows 7 on my Windows 10 device?
View 6 RepliesI created ISO disks for both my 32 bit and 64 bit systems at the MS download site. If I use the ISO disk instead of the Windows Update method, does the install still create the W7 image in case I want to go back to W7 after installing W10?
Also, do I boot from the disk or do I go into the ISO disk and click on Setup?
My 32GB Windows 10 Home PC (recently upgraded from 8.1) is low on disk space. I deleted Windows.old and I have hibernation disabled. Apart from a few browsers, very little else is installed, yet I only have 11.7GB left?
One reason may be the size of the Windows folder:
Size 14.7GB
Size on Disk 9.91GB
From my calculations, Windows appears to be using the higher figure in determining available disk space.
Why is 'Size' so much greater than 'Size on Disk', can I do anything about it? I have a similar 8.1 machine, it does not have this disparity (12.4GB and 12.3GB).
What would be a normal 'Size' for a Windows folder on Windows 10 Home PC very recently upgraded from 8.1 i.e. with few, if any Windows live updates run ?
Upgrade to Windows 10.
One peculiar thing we noticed is that different PC's demand different size for the USB Recvery disk after the upgrade. We had a range from 4GB to 32GB. A majority used 16GB.
What is the reason for this difference.
what is the difference between buying a laptop with or without the recovery media USB? Im picking up a Sager NP8651 and the vendors all offer win 10 pro without and with a' 64 bit usb recovery media'
Is it just a thumb drive with windows on it instead of a disk? What do i get if i dont get it, just a disc?
When using the Media Creation Tool from Microsoft what is the size of the ISO that is created for X64 Windows Pro? The one I created is smaller than one I created from the install.esd file. The size I see is 3.10 GB (3,333,357,568 bytes). Can that be right?
View 8 RepliesAm I right in thinking that after upgrading from Windows 8.1 to Windows 10, I should be able to make a bootable USB including a system image without having to copy install.wim from the downloaded media, placing it on the C: partition and setting the appropriate entry in ReagentC?
As I can only make such a bootable USB after performing the above steps, does this mean that if I subsequently delete the install.wim and ReagentC entry, I will not be able to effect a recovery from the hard drive alone?
Recovery media seems to be fussy about the type of flash drive I use. I can make the full recovery drive including the system image on a Sandisk Cruzer Blade, but if instead I try using a Sandisk Cruzer Edge of the same size, I can only make a boot USB without the image. Otherwise I get the message 'We can't create the recovery drive. A problem occurred while creating the recovery drive'. Why is this?
I have a handful of questions and issues with "Create Recovery Drive"
1. How dose Windows 10 Recovery disk work? When I first tried to create a recovery drive, it specifies the drive size I would need. One said I would need a USB that would take up to 8GB, the other specifies 16Gb. Since USB drives come in it's denominations of 4,8,16,32,64,...., I got 16GB and 32GB respectively.
2. Does Recovery USB Drives need to be recreated once in a while as an update since system files are added to the USB?
I have three Windows 10 PCs I need to create Recovery Drives on each of them with system files inclusive.
3. New Del Desktop, arrived with Windows 10 (64Bit). It asks for a USB that would take 16GB, I inserted 32GB but it created a recovery drive that is 8+GB only. Why? I wish it would have asked for 16Gb so I don't have to spend to get the 32Gb USB. By the way, when I inserted a 16GB USB, it would not continue.
4. Dell notebook XPS, upgraded from Windows 7 (32Bit) to Windows 10 (32Bit). When I tried to create a Recovery USB drive, it asks for 16Gb USB. When I continued, it stalled at a windows that would not highlight the "NEXT" button. This button is grayed, so I cannot create a Recovery USB.
5. Third PC is a HP desktop I upgraded from Window 7 (64Bit) to Windows 10 (64Bit). The Create Recovery USB with system files did not work. When I started the recovery, it just kept chunning and chunning for a very long time and will not stop.
I upgrade to windows 10 after a month of it being out. I still have the windows 8.1 recovery media I made for my system do I need to make windows 10 recovery media for it? or will the windows 8.1 recovery media work and will I be able to re upgrade if I ever have to use it after the free upgrade period runs out? System specs below ....
View 9 RepliesI'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
Having recently upgraded to Windows 10 from Windows 7 I have tried to create a recovery drive to go on a USB flash drive. All I get, however, is the message " We can't create the recovery drive. A problem occurred while creating the recovery drive". I have tried a few times without success.
I looked at the Event Log and saw the following which, I believe, is related to the problem: Microsoft-Windows-CAP12. I.D.513.
I am trying to create a system recovery drive on a usb stick using Create a recovery drive in Settings section.
But apparently I am missing many files such as winre.wim and install.wim as I keep getting error messages that I am missing files and instead am told to insert my Windows Installation dvd to get them. Since I have a Win10 Upgrade install from Win 7 Home Basic, I have no dvd install disk to either copy those files from or use as a rescue dvd, and I looked back at Win 7 files on another drive, and the .wim files are not in 7 either, as that was a Dell reinstall dvd (still have that), but no such files there either.
So can I get Mr. Gates home # in case I need to rescue my OS? My past behavior tells me I WILL need to rescue my pc sooner or later, & maybe this time I can be prepared.
I upgraded to Win 10 Pro. I created a boot disc, repair disc. Now, I'd like to be able to recover from a system crash. How do do I create a recovery disc with the win system on it?
View 4 RepliesUpgrade from windows 7 to windows 10 need to do a clean install ....
View 10 RepliesI was attempting to upgrade my Toshiba 8.1 to windows 10 and was offered to update bios and Atheros Wireless Lan Driver. I mistakenly did both updates and now have lost the Lan Driver. I obtained usb system recovery from Toshiba but when I attempt to recover, the Atheros Wireless Lan Driver wont and I am stuck. Is there anyway that I can reinstall the driver and finish recovering my pc? I have download the driver onto my usb.
View 2 RepliesSo my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
View 8 RepliesWhen I attempt to create a recovery drive, I get this message.
Recovery Drive
We can't create recovery drive
A problem occurred while creating a recovery drive.
What is the answer, as I have tried this several times.
It has been suggested that I should create a Recovery Drive from USB to enable me to reboot if I get problems.
However when I use "Recovery Drive" I get the following message "We cant create a Recovery Drive on this PC. Some files are missing.
To Troubleshoot when your PC cant start use your Windows installation disc or media" . As I upgraded from Windows 8.1 I don't have a disc & what is media?
If so, I don't have one... I look in Drive management and SSD is all one partition, I assume 232gb is what a 250gb ssd looks like formatted. Is that going to be a problem if I ever run reset or does windows hide all those files somewhere else?
I know I had one before on my old install but it was an update from win 7.
This worked for me a few weeks back. Today I am looking to try to reload Windows 10 on one of my desktop PC's that has just never been right after upgrade from Windows 7. I figured, trying a clean install is in order. The trouble is, as of today, the MediaCreationTool is not working for me. I get the same error on all 3 of my Windows 10 computers: "Setup couldn't start properly. Please restart your PC and try again." I can say that the mediacreationtool worked splendidly a few weeks back, but I have already repurposed that jump drive so the media is no longer in tact.
Specifically, the tools on this page are not working for me: [URL] ...
My PC's have always been real smooth, but now all three are just not quite 'right'. Mouse disappearing hear and there while I am dragging it. Pauses before I can type, etc. Just weird random anomalies that are far from normal.
I am trying to create a recovery USB drive from which I can install Windows 10 fresh, if needed. Or quickly restore system images in case of a drive issue. There are a couple of things I am not clear about.
Background:
I have an ASUS laptop that came with Windows 8.1, UEFI (upgraded to Windows 10 at the moment). Initially, I created a Windows 8.1 recovery USB and reinstalled Win 8.1 using it. From what I understand, the 100MB EFI partition is normally the first one. On restoration, the following was created
305 MB Win 8.1 system partition
100 MB EFI
C drive
Manufacturer recovery partition
When it upgraded to Win 10, it ended up with the following partition structure
305 MB Win 8.1 system partition
100 MB EFI
C drive
450 MB system partition (I believe this is Win 10 system partition)
Manufacturer recovery partition
Questions:
The trouble is, now when I create a Windows 10 recovery USB drive, it really creates just a rescue drive (< 1GB in size) even though the 'copy system files' option is selected. I believe a recovery USB drive needs at least a 16GB drive. Not sure what is happening here?!!!
Also, is there a way to make Win 8.1 recovery create the system partition adjacent to the C drive so it can resize it to 450 MB during the upgrade? Or maybe create a 500MB partition beforehand that Win 8.1 uses during recovery and later is upgraded to Win 10? Can I create the partitions beforehand using GParted Live USB and expect the Windows recovery process to use them?
Is it possible to take Windows 10 recovery disk in a DVD? I know that recovery image can be created in a USB flash drive. Same possible with DVD?
View 7 Replies