Whea Uncorrectable Error - Getting Blue Screen 3 Times A Day
Sep 23, 2015
So every day i get this blue screen error 3 times a day, my pc started doing this 2 weeks ago, never did it on windows 8.1 and was fine on 10 for a while. Googled it and says its a cpu voltage error, but i have reset my UEFI to defaults, updated UEFI, updated drivers , and nothing works. My CPU is the intel i7 4790k and the motherboard is an Asrock Z97X killer. The interesting thing is my laptop does the same thing and so does my friends all in one pc, so is this a windows 10 issue? and is there a fix?
I'm getting some random whea uncorretable errors, usually happens when playing games. But sometimes happens right after the computer restarts after the blue screen. I've attached the debug file.
My laptop, an Acer, has been freezing multiple times a day recently. Sometimes I get a blue screen eventually that tells me there's been a WHEA error, sometimes none of that. Yesterday, I kept staring at the screen for a while instead of restarting, and eventually it recovered. I could see the processor activity climb to 100%, and that interrupts claimed up to 14% of the activity. Afterwards, the network adapter (Qualcomm Atheros AR956x) was turned off, apparently because of a 'code 12' - 'insufficient available resources'.
That problem was only resolved after a restart. When I shut the computer down, I got a screen telling the computer was being 'prepared' for a long time - sometimes I also see a blue screen showing the installation of updates at start-up, even if none were waiting to be installed. The drivers for the network adapter are up to date, version 10.0.0.318 (apparently dating from May 2015). I'm quite sure this is a software issue - 'chkdsk' doesn't find any problems, nor does 'sfc /scannow'. And a friend of mine with an Apple laptop running Windows 10 (we've never exchanged USB sticks or anything) has exactly the same problem since installing Windows 10 (different network adapter however, and seems to have improved recently).
On three occasions, my laptop has crashed displaying the blue screen. If I recall correctly, the blue screens occured while I was either browsing the web or reading a PDF..
just recently i installed windows 10 (clean install) on my built desktop. At first it was fine installing programs etc. Then not sure what i installed last or what happened during an installation but now when i try to install a program like Nivida Graphics Card Driver the blue screen error comes up. It never fails, even if i try and install skype it also causes the problem. I originally had the Nvidia G experience installed but i read online that this might be causing the problem so i uninstalled successfully but it is still happening.
It has happened twice since I installed windows 10 in the last two weeks.
I have the default blue desktop in 10 and I also have a rather old ATI Radeoon HD 4600 graphics card, though the driver date in device manager is January 2015.
Whilst browsing facebook on two occasions the screen has just gone a totally blank blue colour, no error messages or anything like that. I have to hard restart, as task manager won't come up, and windows 10 starts fine again, doesn't go thorugh CHKDSK or anything.
WIndows 7 works perfectly on my other partition so not a hardware or monitor problem just specific to windows 10.
Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
I m using dell inspiron 14, and upgraded to windows 10. Now my laptop keeps restarting giving me internal power error. I reached the troubleshooting part where I clicked on startup settings.when I click restart there..it restarts with blue screen without giving me safe mode option.
So I have read a couple of articles of people with the same issue and they're saying that i should uninstall the graphics card drivers, and reinstall them, and i have done that and I'm still getting the same problem. I can't play any games and it's rough.
I installed a copy of windows 8 that I owned and then upgraded it to windows 10. It was working fine for a couple of weeks, and suddenly it had and error and is stuck rebooting itself with a blue screen error.
The error appears to be different every time but the ones I have seen repeated are "WHEA_UNCORRECTABLE_ERROR" and "MACHINE_CHECK_EXCEPTION".
I can get into the BIOS and that's about it. I can't find a way to boot into safe mode and when I try and install a fresh copy of windows 10 via USB created from microsoft i still get a blue screen error after a couple of seconds.
I built my very first PC in the weekend. Everything was working fine, but after a restart, I had an error message saying something along the lines of "Windows couldn't start". I then had several options where I ended up choosing something like "Start Windows from a version that worked" which erased like half of my programs and many of my drivers. I then proceeded to reset the computer entirely and restarted.
Now, the computer is working again (as it were before) and I've installed everything again, including all the drivers (I hope). However, when I restart the computer, I get a blue screen that says: "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll start for you. If you'd like to know more, you can search online later for this error: BAD_SYSTEM_CONFIG_INFO. It then restarts and works perfectly. This only happens every approx. third restart, the other times, it boots just fine.
I bought Windows 10 Home on a USB which I used to install on my new SSD. All the drivers should be up to date. What to do?
My pc is unable to start-up after attempting to reset it(fresh reset). It is in a restart loop and when I try to turn it on the Windows 10 logo appears but then a blue screen appears saying "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we will restart for you." This then lets the PC restart and this restart process happens again. I have tried pressing F8 while it boots up to try to get it into safe mode but had no luck.
I just built a new computer and have been randomly getting this error message from time to time...and sometimes have trouble even getting the computer back to the Desktop without hitting the blue screen again....if I'm on the desktop and it happens it usually says (atikmdag.sys) at the end...sounds like a graphics card issue, however I have the latest drivers for the card (non beta)...when attempting a restart to fix and it hits blue screen right after that bit at the end is not there...here are comp. specs
Motherboard - MSI 760GMA-P34 (FX) CPU - AMD 8320E GPU - ASUS R7 360 RAM - Avexir Blitz 1.1 - 16gb 1866mhz (dual channel) HDD - WD 1tb blue Power - Corsair CX600M OS - Windows 10 Home
I have some possible theories: The RAM may be causing issues...Avexir does not use the more common Samsung chips I don't think and has (Intel optimized) all over the packaging...I will try swapping G-Skill RAM from another comp soon to test this
Also I didn't realize at the time but the motherboard has no drivers from MSI past windows 7...could that be causing issues?...
And of course there's that ending on some of the blue screens indicating a graphics car issue...could the latest drivers for Windows 10 on a GPU be creating issues on a board with no Windows 10 drivers?
Whenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
A couple of weeks ago when booting up my PC, I came to I assume the Windows 10 version of the blue screen of death. It said something to the effect of a kernel security check error, it said it was repairing the PC and would reboot.
However, it wouldn't reboot. The farthest it would ever go is the 4 blue square windows screen and then eventually the screen would go black. For a while, the blue light on my monitor would stay solid but the "analog" and "digital" icons on the screen would alternate between analog and digital. Eventually it would just go black and the monitor screen would blink and the HDD light would stay off.
Multiple reboot attempts never got past that screen, and eventually the screen will just go black and the monitor light just blinks.
I went to my office computer that also runs Windows 10 and made a repair disk. I got home today, got into the BIOS and changed the boot priority to the DVD. I was able to get it to boot up to the repair disc (after a couple of attempts) and got into the repair utility. I tried the Start Up (or boot) repair, and it said it couldn't fix it. I tried the system restore and it said I had no restore points. So I thought (stupidly), maybe just getting into this repair disc area it would go ahead and boot on up. So I clicked "Exit and continue to Windows 10". Well that got be right back to where I was, a black screen.
So then I decided I would just go back in and use the utility to "reset", keep certain files and do a clean Windows 10 reinstall. Now I can't even get back into it. When I try to boot, IF I can even get any data to show on the screen and the monitor to "wake up" I can't get back into the repair disc. I can get as far as "Press any key to boot from CD or DVD" and then it will go to the 4 blue square windows screen that I was at previously, then eventually the screen will flash and then just stay black. By a little googling, sounds like maybe it could be a video card issue?
Have had home builds for years with no big issues before windows 8.1 and now windows 10. I thought i had issues with memory or graphic card on my previous computer so i ended up buying new parts for a new build.
But nothing changed. Not so frequent as before but up to several times a day my computers gets an BSOD. I must say it is random for me what i am doing while this happens.
Different messages before restarting. The 2 last one while trying to create this thread and making the dump zip file was Kernel check failure and DPC watchdog violation.
Okay so i have download threw windows installer, it gets to about 60% on the install (its in the installer not windows update)and gives me an error message (i have not been quick enough to catch it yet) and then reverts right back to windows 8.1. Then MAKES ME re download windows 10 AGAIN!! I am going to try to catch the error the next time, but crashing during install and then reverting back to 8.1 just to redownload it.
Also according to windows update it has failed to install 16 times!!!
So, new computer, was using Windows 7 and getting BSODs constantly. So I decided to make a clean install with Windows 10 and thought the issue was resolved, clearly not the case.
I will be uploading the last mini dump, but let me already tell you that more than one error code happened (more than one BSOD).
I used the forum's guide to collect the mini dump information. The dump archives I got from the Windows folder are huge, I guess we are not going to use that, am I right?
I am suspecting it to be some Hard Disk issue or RAM memory. One of the messages I could capture was "Kmode_Exception_Not_Handled".
