Where Is Hibernation File
Nov 9, 2015
I lost my hibernation capability in my upgrade from Win7 to Win10. So I am trying to get it back.
Couldn't find hiberfil.sys in C: so I looked for instructions on this site and found them. But here's what is happening (cut and paste from the elevated command window):
C:>c:windowssystem32powercfg /h /type full
The hiberfile size has been set to: 6361485312 bytes.
C:>dir h*
Volume in drive C is OS
Volume Serial Number is C696-2CB5
Directory of C:
File Not Found
C:>
My file manager is setup to show hidden files but it also does not show hiberfil.sys in c:
Just to be thorough I also searched the entire C drive for files containing "hib" but could not find hiberfil.sys.
View 4 Replies
Similar Messages:
Sep 13, 2015
My pc has recently decided to start turning itself on in the middle of the night, while its supposed to be hibernating (I'm not sure yet if it is also affected during a normal shut-down). I also haven't managed to lock down the exact time (if there is one) that this happens.
From some digging I did, some people seemed to think that the task scheduler was doing things by itself. I identified two task that looked like they might fit the criteria (below) - are either of these likely to be causing the spontaneous turn-ons, and what's the safest way to resolve this?
[URL]
View 9 Replies
Nov 30, 2015
When I resume from hibernation. It goes thru screens asking if I like this one.
View 1 Replies
Oct 13, 2015
I'm experiencing problems with Windows 10 trying to load. I'm unable to get past the login screen. It seems that Win is locked up on me and appears unresponsive. Trying to type my password at login screen, it just seems to sit there. After a few mins some characters appear in the password field with much delay. After all of this, I have attempted to load a live Linux distro to grab files/data off the drive to start backing up the OS and reinstall. When I went to do this, I get an error message in Linux "error mounting sdb1..... Windows is hibernated,refused to mount... Operation not permitted......" How do I get Windows 10 to load
View 7 Replies
Nov 18, 2015
It happens very random and also everytime when I try wake PC from hibernation.
View 8 Replies
Sep 18, 2015
Whenever my notebook returns from hibernation the menu no longer responds (when I click with the left mouse button anywhere on the taskbar or right in the start menu) nothing happens, but when I right button displays the menu dialogue. What makes me having to reboot the machine.
I've done a clean install, installing driver by driver to be some of them had the problem and all have been installed and not yet figured out what causes the problem in return from hibernation.
I'm using windows 10 home, memory 04GB DDR-3, Intel Core i5 CPU, Intel HD Graphics 3000.
Note: With the windows 7 home premium that was installed before the machine never happened this.
View 4 Replies
Jan 9, 2016
I accidentally hit hibernation button last night. Woke up this morning and the computer will start up but that's it. There's only blank screen. And I can hear the computer on. I also see the power light on from the power button and the plug into the computer.
View 3 Replies
Feb 18, 2016
I get the random dirty hibernation of my laptop if I don't activate an input (mouse or keyboard) in the span of 1minute. I had Windows 8.1 prior to upgrading to Windows 10 and all my power settings were fine and I never had the dirty hibernate then upgrading to Windows 10 for some reason I get it.
One way I sort of prevent the Hibernate is to:
Completely shut down/restart my PCWhen it bootsRun CMD in "Administration Mode"Type powercfg /h offHit EnterThen hope for the bestThis is only when its plugged into a power source, when I take the laptop off power and only use battery and I walk away for 1minute it does the dirty hibernation, its like a retarded dog that you feed it once it stays, the moment you walk away from it it craps on you.
And before you answer "Have you checked your System Power & Sleep settings, yes I have and the Advanced Settings which are component specific.
I'm afraid over time if this continues to happen my PC will crap itself.
View 5 Replies
Aug 18, 2015
I use desktop PC x64 based amd motherboard.Upgraded from windows 7 -takes longer than usual but sucessfully.My boy was happy because nothing changed in programs and games he use to play.All fine few days than once in the morning found a massage on start up "Resume from hibernation" I was waiting for resume for a while than hour than day and nothin happen.
Next day have to do some tries to fix.Looks on forums for similar problems...someone mantioned about ram slots to clean from dust and i tried that but still the same.In opened PC i tried ti figure out what else could be if everything in hardware is just fine.Than look for graphic card -pull it out and again in.And still nothing happened.Than found some older graphic card with lower values and restarted.On restart it appears on blank screen that graphic card is beiing updated and than bingo! windows continue to install updates and after several restarts it was all done.Got it back and problem solved.
Tried to disable automatic updates on settings but read about that windows 10 does not have option to disable that,rather only ask user to automatically or not to install updates.I do that what i could.Still that not convince me to keep win10 rather to roll out to previous version-but my boy was yelling on me to not to lose all stages in games and OK.
nEXT morning same.resume from hibernation.ok i said now i know what to do-removed graphic and put older one.And this time there were no update for graphic just continue to resume from hibernation Now i removed that older one with better one from my other pc with higher value graphic card--and after restart there were also no updates in bios and continue to "resume from hibernation" than i tried something else.Assuming that is windows placed on hard disc -remove that hard disc and plug it new one.
That for god sake it still resuming in light blue screen from hibernation.I mean which part remember that process if not hard disc. To not talk about that dvd disc rom is disabled and bios is disabled and only keys works on keyboard is ctrl+alt +del to restart.And that was the time was my pc was virtually died allthough each peace of hardware is 100% healthy.Last thing i remove all pieces from its slots and motherboard too.Leave it through the night and again in the morning plug it all.And again technically works fine but message still resuming from hibernate.
View 1 Replies
Aug 12, 2015
Issues regarding hibernation on laptop? Since upgrading to Windows 10 I've noticed that my laptop seems to be going into hibernation much more quickly than it did in Windows 7. I checked my settings and my screen saver settings and so on are setup to those recommended by HP but these do not seem to be having an impact on hibernation. What's particularly frustrating is that even when it's plugged in if you have a long download/install/update you must keep the machine active by moving the mouse or be active on the keyboard or it will go into hibernation mode very quickly (under 5 minutes).
View 4 Replies
Dec 24, 2015
I have all the power settings set to stay active, but the computer goes into sleep or hibernation (I do not know which) after being idle for around 20 minutes.
View 3 Replies
Jan 13, 2016
Hibernation ON: Upon shutting down my Acer Aspire 5250 Laptop when hibernation is enabled, the computer doesn't shut down normally. Instead, the screen goes black as if it's shutting down and then the power light blinks and then finally it shuts down.
Hibernation OFF: Upon shutting down my Acer Aspire 5250 Laptop when hibernation is disabled, the computer shuts down normally. The screen goes black letting you know it is shutting down, power light goes off as well as it itself.
Touchpad Sensitivity: I use a wireless mouse. However when I am using Microsoft Edge (Most of time), Internet Explorer (Sometimes), or Google Chrome (Only on Sundays) my touchpad is overly sensitive. If I accidentally bump it with my hand, it changes the size of my browsers' webpage.
View 4 Replies
Aug 14, 2015
I have an HP DV7 laptop that I upgraded from Win 7 Home to Win 10 Home. After the upgrade I noted that once my laptop goes into hibernation 1 time and you bring it out of hibernation, the laptop then ignores the power settings and immediately goes back into hibernation after 3 minutes of inactivity. As long as you're moving the mouse or typing on the keyboard you're OK but if your totally inactive then in 3 minutes the machine will go into hibernation. Note also that this does this even when the laptop is directly connected to a power source and not running directly on the batteries.
View 1 Replies
Oct 21, 2015
I have been using Win10 since July. It has been working fine. Just recently I noticed a blue screen at boot up stating, "resume from hibernation". I have never used hibernation in my life. Sleep mode, yes. Hibernation, no. But I have an SSD and don't use sleep anymore. I do a full shutdown every time. I noticed the same issue on my Dad's Win10 computer.
The reason I am asking is I want to boot from a USB flash drive, but "resume from hibernation" will not allow that.
View 5 Replies
Dec 12, 2015
I have successfully activated hibernate mode (S4), yet whenever the PC is hibernated a shake of the mouse or the press of any key on the keyboard just wakes and turns on the PC. Needless to say I do not want this to happen. Hibernate (S4) works as confirmed by the fact that when it's waken up, the PC goes through the POST phase of the boot before loading W10. In addition a powercfg /a gives the following output
Code:
C:WINDOWSsystem32>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast Startup
Sleep (S3) works too. Although it seems to have the same effects on the hardware (turns off the CPU fan), the waking up it's much quicker, without POST. In addition, here's the log from Windows event viewer:
Code:
Log Name: SystemSource: Microsoft-Windows-Kernel-PowerDate: 12/12/2015 16:40:19Event ID: 42Task Category: (64)Level: InformationKeywords: (4)User: N/AComputer: DESKTOP-9NITH1LDescription:The system is entering sleep.Sleep Reason: Application API
[code]...
In the UEFI BIOS all the ACPI settings are in order, as shown in this photo. Bios is updated to the latest version.
View image: WP 20151201 11 43 34 ProEnabling/Disabling Fast-boot and/or fast start-up changes nothingI tried also a different USB wireless mouse, but no changes. With a PS/2 mouse the PC does not wake up from hibernation.Switching the Logitech Unifying receiver between USB 2 and 3 makes no difference.The same mouse and keyboard do not turn on the PC after a complete shut down.
View 1 Replies
Nov 5, 2015
My Asus T-100 hybrid tablet/laptop won't wake up from hibernation. It tells me to swipe to shut down computer and nothing happens. I ran down the battery, plugged in and then recharged. It's still stuck on hibernate and won't let me into windows at all.
View 2 Replies
Mar 6, 2016
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
View 1 Replies
Oct 13, 2015
After surviving the blue loop of death, I am now stuck in permanent Hibernation mode. This is even after a hard reboot.
View 1 Replies
Nov 8, 2015
On my laptop, I get this error from time to time when resuming from Sleep/Hibernation: BSOD with 0x45000126 ...
I have tried to google it, but without ANY hits! What this error is?
View 3 Replies
Dec 8, 2015
When I go to Start -> Power -> Shut down, it displays the "Shutting down..." window, then the screen goes black, but the laptop won't shut down completely. That is, the WiFi, Bluetooth and Power (light bulb) indicators are still on (and the battery indicator too if plugged), and I have to force (power button long press) the laptop to shut down. I can also shutdown the WiFi and Bluetooth devices using the keyboard at this stage (with FN button). And if I keep the laptop this way long enough (unplugged), my battery will be completely drained.
I recently disabled Hibernation (cmd admin -> powercfg/h off) so I suspected it to be the culprit. So I enabled hibernation again (cmd admin -> powercfg/h off) and my laptop was shutting down as it should. I then disabled hibernation again and the problem came back. I also figured it might be something to do with my power plan so I reset it (Power options -> Change plan settings -> Restore default settings for this plan),
View 8 Replies
Aug 17, 2015
I had this problem when Windows 8 was new (but never had it with 8.1) and now it looks like it is back with W10.
My PC was fine up until about 2 days ago, it would go into hybrid sleep and wake with no problems but now every time I try to wake my PC the LED's, mouse and keyboard turn on but then it crashes and reboots.
I tried re-installing drivers, un-installed them, downloading them from the manufacturers websites instead of windows update but the problem remains.
I think I've narrowed down where the problem comes from and it appears to be the hybrid sleep option, disabling it and just using sleep works as expected, but if I try to use hybrid sleep....boom it happens again. I also tried enabling hibernation and that also crashes when waking up, so I assume there is a problem with the hibernation feature.
View 1 Replies
Jan 26, 2016
Had this problem now since installing Windows 10 for the first time. Have re-installed 10+ times, from new downloaded ISO's with hash tag checks just to make sure. Have bought all new hardware as well; CPU, PSU, Mainboard, Computer case, CPU Fan (3 of them), problem still persists, is obviously a Windows 10 problem.
CPU Fan slows to almost halt after waking up from sleep/hibernation.
View 9 Replies
Oct 7, 2015
Ever since I upgraded from Win 7 to Win 10 my laptop (Satellite A505 S6005) will go into sleep mode without issue but refuses to wake up up. I have to do a hard power down in order for it to turn off. I've checked my power settings and everything is the same as it was for Win 7.
I found online that it seems to be a possible issue with the Intel Management Engine Interface not being the right version. I'm currently on driver version 6.0.0.1179. I've tried to upgrade it to a new version but Windows states I have the best version for my PC. Have also tried via Toshiba and Intel sites for a new version with no success. How to get a new driver version?
View 2 Replies
Nov 5, 2015
Background: So, I have an ASUS R557LA-XO1543H laptop. That i supposedly only needed to reset totally and then install F-Secure Safe, well after the reset, on the Windows 10 installation, when came the step to create a Microsoft account(or skip it, which i wanted to do). So at this point i realized, the touchapd doesnt work, nor did anything happen when i plugged in a mouse.. keyboard nothing as well, so i decided to shut down and restart it, well, then it went to the "defaultuser0" screen, which i found a solution to (hold shift, restart, go through certain steps and create a new account), well after i restarted the laptop at the point i had created a new user, as the guide told to, the laptop would only go to black screen after the ASUS logo. So i tried mashing some buttons, and eventually i got to my current problem.
So upon boot the ASUS laptop, after the asus logo, goes to this state "moving to hibernation". Yet I havent found any solution to this, and to speed up the process of finding a solution im posting this here.
ASUS laptop goes to "moving to hibernation" after the asus logo on boot.
View 1 Replies
Nov 12, 2015
At the first after I upgraded my notebook from windows 8 to windows 10, I just realize that 1 of my 3 user account is not exist anymore (the Guest account is not there just after I upgrade it into windows 10). As I tried to make the new Guest account and still didnt work (I dont want to follow such a complex email registration required by windows 10 to make a new user account), I thought to delete my secondary user account. However, I just realize that there is a file that I saved in the Desktop under my secondary user account. Is there a way to restore this desktop file that is saved in my deleted user account?
I have opened C:Users but I cant find the folder with the name of my deleted user account. It's very important yet big file (around 2 GB).
View 1 Replies
Sep 26, 2015
I can set an alias in the hosts file on a win7 machine and access it just fine but doing the same in Win10 prompts for creds that never work even when entered correctly. What did win10 change?
hosts file entry:
127.0.0.1 hostname alias
ip - works fine
hostname -works fine
alias - Prompts for creds and creds don't work
I have gone to the extent of fully disabling UAC from reg, same outcome. Network and file sharing is set to password access and not homegroup. Simple file sharing is off.
Something to note. I always disable ipv6 form the adapter but when I ping my hostname it shows the ipv6 loopback. Why is that? When I ping the alias it returns 127.0.0.1 ipv4 loopback that was entered in the hostname.
View 2 Replies
