Why Toshiba Laptop (l50-b-235) Volume Is Very Slow Since Upgrade From Windows 8
Aug 7, 2015
I have toshiba l50-b-235 laptop with built-in Onkyo stereo speakers, enhanced by DTS Sound, Skullcandy certified and now all of sudden since upgrading to windows 10 from windows 8 the volume is really low (it has dropped around 50%). what can i do to fix it.
I went to device manager and sounds but underneath i can only see conexant smartaudio hd now (this came only after upgrading to windows 10) and i have uninstalled and reinstalled it already but of no success.
I have a Toshiba Laptop with an AMD processor, 4gb Ram, 500 Gig hard drive with 366gb free. It is running very slow. I have over 70 processes running. I'm pretty sure I don't need that many but I don't know what is needed and what is not. I've tried to copy the list but can't figure out how to do it. I'm using open office.
I recently bought a new Toshiba touch screen Laptop, primarily for my recording studio and on-site recordings. It works well with my DAW Software (Sonar Platinum) and my recording hardware.
However, it does not have the Stereo Mix and from what I find there is no way to add it, as it apparently has been disabled in the hardware.
The camera on my Toshiba S50-B laptop worked fine when on the original Windows 8.1 but doesn't work now that I have upgraded to Windows 10. It says "Something went wrong - make sure your camera is connected and not being used by another application". I have tried everything I know of and find no reason. Is there another driver required or ...? I cannot even find the camera.
Computer Model/ Specs: Toshiba Satellite L50D - B Serial No. ZE257837C Processor: AMD A6-6310 APU with AMD Radeon R4 Graphics 1.80 GHz RAM: 8.00 GB (6.96 GB usable) System Type: 64-bit Operating System(Windows 10), x64 based Processor
My laptop goes to sleep and never wakes up without having to force a restart. I have changed the settings so it will never sleep or turn off the display, but, it goes to sleep anyway
So, I don't know how to fix it, and I need to know how. I turn my back for 5 minutes, and all my unsaved work is lost cause I have to force a shutdown. The computer goes to sleep, I press the on button, the computer starts doing its usual hum, the number lock light turns on, and nothing else happens.
my Toshiba Satellite has Windows 10 and it shows that it's connected to the internet though when i try and run chrome it say's it's not connected when i run steam it say's it cannot connect to the steam network.
I have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)
I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.
I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.
Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip
Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.
I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.
The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.
All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.
Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.
Had a customer present their laptop for repair following Windows 10 upgrade, so wanted to post the solution here.
The device, a Toshiba Satelite Pro Touchpad had an issue where it appeared to hang on startup following upgrade to Windows 10. Investigation revealed that the issue was actually the Touchpad was becoming disabled due to a problem with the ELAN driver that Windows 10 had installed. I wound the driver back and everything was fine, then Windows 10 decided it had a better version of the driver and installed the bad one again. Solution was to wind back the driver again from 15.8.x.x to 13.8.x.x and disable automatic update of drivers to stop it being replaced again.
Clearly it is not ideal to disable the driver update capability, however if there are not sufficient checks and balances to ensure that the right driver is being installed it is going to create more problems that it is worth.
Microsoft Suggestion: It may be an idea to allow disabling driver update for individual driver basis.
my laptop's volume simply isnt as loud as it is supposed to be, or has been in the past. all settings/ controls that i can find are turned to 100 percent. And i dont mean that i want it louder than 100%, im saying that the 100% that its on sounds like what should be 50-60%. I know that it has been able to be a good deal louder in the past. So i dont know whats wrong. I am in the military and have been away from my laptop for about 3 months, but everything seems to be up to date. It is to the point where its just not loud enough to enjoy/ use to play games or watch videos. And same thing for when i plug my headphones in, it isnt loud enough then either, sounds like what should be 50 or 60%. My laptop is an msi ge72 apache pro, and runs windows 10.
I installed Windows 7 onto my laptop , I then did a free upgrade to Windows 10. I would now like to move this installation to a new PC that I am buying. Can I do this for free? I no longer want Windows installed on my laptop, so can I transfer the licence to the new PC?
I was wondering whether it were possible to open the volume mixer instead of the volume control when left-clicking on the volume icon in the tray. At the moment I have it set to open the old classic menu, but not the volume mixer.
my game volume and my chat volume are mixed so that when I turn up my chat volume, my game volume also turns up. when I turn up my game volume, it doesn't turn it up, but when I turn up my chat volume, it turns up both my game and chat volume. How can I fix it so that my game volume and chat volume are different?
I have a Lenovo Y50-70 laptop. It's about a year old. Spec wise it is an i7-4710HQ, 12GB RAM, GTX860M dedicated GPU and I believe it has a 1TB 5400RPM Western Digital SSHD.
I've found that the boot time is slow. I can compare this to another Lenovo laptop I own, which is a Z580 (i5-3230m CPU, 8GB RAM, standard 1TB mechanical drive (unknown manufacturer)) which boots much faster. The last time I timed it, the Y50 took more than 90 seconds to reach the Windows desktop (set to autologin via changes to netplwiz) and the Z580 takes about 30 seconds. Furthermore, the Z580 is quicker to achieve a 'usable' state (ie. loading FireFox or something).
Both laptops came with Windows 8 (8 on the Z580, 8.1 on the Y50) and were upgraded to Windows 10. Both laptops were also upgraded from clean installations of Windows (to remove Lenovo's famed bloatware).
But more annoyingly than the boot time is the usability. On the Y50, if I right click a folder or file in File Explorer, it pretty much hangs File Explorer (loading circle icon for several minutes and a 'Not Responding' note). Eventually that'll stop and it will have done nothing.
Sometimes, if I then do it again it will actually allow me to right click and bring up the menu.
I have also found that any icon heavy folders, such as pictures or videos, cause File Explorer to have a complete meltdown and become sluggish to the point that the window needs to be closed.
I use StartisBack on both machines, and the Y50 does not display any icons on the 'More' section of the Start Menu. It also cannot find anything if you search for it. The Z580 has no such problem.
The Y50 has been scanned with both Avast Premier and MalwareBytes Anti-Malware Premium. It does not appear to be infected.
I did perform a clean installation a few months ago (back when it was on Windows 8.1) - I cannot recall the exact reason, unfortunately. It wasn't the same issue I'm having now, but it was another usability problem that made me opt to do a clean install.
I am leaning towards doing yet another clean install, but I am also wondering if this could possibly be an indication that the drive has bad sectors or something and data keeps getting corrupted? Alas, as I say, I cannot now recall what prompted me to do the last clean install.
I can't have a conversation with my friends while I have this problem.
So I have the sennheiser pc 363d headset, the mic volume has to be set 100 volume or I can't be heard. However windows 10 keeps automatically turning down my mic volume from 100 to 90 and lower making me mute.
Is there a way to stop Windows 10 from turning down my mic volume?
All browsers in my laptop including chrome, firefox are slow after windows 10 upgrade. Data connection speed is very high but loading time is slow. How to fix this?
I've recently done the Microsoft Windows 10 upgrade form Windows 7, Windows 7 was fine but since the upgrade was free I thought I might as well upgrade.Since I've upgraded IE is very slow on all web pages, sometimes if I'm doing banking where you have the drop down boxes for Password Indentification they can be really slow. I can't remember what version of IE I had before but now it's 11.0.26.
I upgraded to windows 10 today. but the update failed and I got a boot phase error. soon after my system reverted back to windows 7, but it took 4 minutes for my system to actually get to the welcome screen, and it's been doing that since my attempt at upgrading, could this be a result of hard drive falliure or just the OS? should I do a clean install?
The microphone on the Beyerdynamic MMX 300 is quite loud and sensitive, so I decrease the input volume by 30% in the recording devices menu, but regardless of disallowing access to it from other programs e.g. Skype, it always seems to change back up to 91% after awhile. I'll attach screenshots of the settings I've changed in Skype/recording devices. How would I completely prevent the volume readjusting itself?
Upgraded my Windows machine to 10 last week. I didn't want to take any chances so I did a totally clean install. I haven't made any tweaks or installed any programs. My laptop is an ASUS dual core AMD with 4GB of memory and a 750GB hard drive.
When I use Microsoft Edge it takes 3 seconds to open the browser and then when I type a website address it takes 7 seconds to fully load. I installed Chrome and while it's faster, it's not by much.
I have another laptop running Windows 7 on the same network. It opens websites almost instantly. It does have better hardware - Intel i7, quad core, 8gb of ram, 500gb ssd. However, web browsing isn't a resource intensive activity so I would suspect hardware differences would not have a material impact.
I just upgraded from Win 10 32 to Win 10 64 bit and my internet connection is very slow, about 20/30 kb/s. It was a fresh install, deleted everything and reinstalled from scratch. I have looked on the forums and cant find a solution that works, I've checked the network adapter drivers for my wireless and they're up to date. I've troubleshooted the problem and they said something was wrong with the network configuration which was solved, but still no change in the internet speed. I've got broadband and should be downloading at hundreds of kb/s.
Since I upgraded to Win10 it takes FOREVER to transfer files from my SD cards via the built in card-reader. It worked fine prior on Windows 7. Now the speed meter BARELY goes above 0... The files do transfer, but it takes hours. I shoot a lot of photos, so I need to get this fixed. I did add an exclusion for explorer.exe in windows defender which was suggested by a post, but that didn't seem to do anything.
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
My Windows 10 laptop, which previously had Windows 7 (I upgraded through Windows Update) is now having problems with the file explorer.It all started last night, when I was listening to some music with the windows media player, then it froze, a windows popped up asking me if I wanted to end the process and I said yes. From there, it all went downhill. My File Explorer is now EXTREMELY slow, I open a folder and it takes 1 or 2 minute for a new window to even open. Then it takes like 2 more minutes for the new window to even show things. When it does load i can't even scroll up or down or open another subfolder because it freezes and shows "Not responding" at least 3 time before even doing something.
At first I thought it was a performance Issue, but Steam, Task Manager and even games work perfectly fine. Maybe it's worth to mention that my task manager sometimes displays as if my disk was being completely 100% used, but then it goes back to 98%, then back to 100% again, and after a while it calms down and displays the actual percentage. My HDD is more than half free.
Also, when I first installed Windows 10 I had a BSOD Issue. Managed to solve my issue through dump files provided by the W7F Diagnostic Tool. I am trying to back up my most important files to my external hard disk right now in case I have to reset/format my PC, but since the File Explorer is extremely slow, the estimated copy time is more than a day.
Google Chrome won't open and using the Windows 10 search tool at the bottom left makes File Explorer crash sometimes.
I read through the forum and used the instructions given using an external mouse to sort he touchpad issue out. But my clickers won't work. It's a Toshiba satellite C50D-B-120 laptop and prior to his I had windows 8.1.
