I've been trying to install the newest W10 update, but I've been having some trouble. I've tried 2 times to update my computer but it restores back to my previous version of windows because the update failed.
I've checked Event Viewer and all that gave me was "error 0x8024200D" and nothing else that I saw that could work.
I'm running Windows 10 Pro on Version 10.0.10240 (Build 10240)
I have tried to update an older laptop to Windows10, three times, or roughly 8 gigs of data. In all three attempts it has failed and stopped at 32% of the installation; and in all three attempts Windows had to automatically roll back to Windows, in my case Windows7.
Searching for solutions, none of them work, one of those solutions is to disconnect all your peripherals and try again based on the error you see in the image. I only have one peripheral and I seriously doubt it would cause Windows10 not to update when I have the same device on another machine and the update to Windows10 worked successfully; although I disconnect the one peripheral and I was right, same problem, Windows10 failed to update ?
I have two computers my laptop has updated to windows 10 with the automatic upgrade with no problems.
But my PC will not start the upgrade I was told to look in the temp folder $Windows.~BT.
The size of this folder was 5.88 GB. And had been like that for a couple of days.
After reading on [URL] .... It said that the upgrade might be corrupt I followed the advice and went to (Windows/ Software Distribution/ Download) and deleted everything in that folder. Then I ran the command prompt as an administrator. Type in "wuauclt.exe /updatenow".en as advised on the website.
Almost straight away the windows upgrade started again but it has gone back to the 5.88 Gb and stopped again
Looking at windows update and view update history I see there are 6 failed attempts to upgrade to windows 10 all with Error details code 80240020....
This the first time am having an issues with the update center.the rest of updates from today (Office 16) were fine.Once again when am trying to install KB3124263 - am stuck at Getting Windows ready after performing Windows update.the only way to get rid of it (after 30 min) is to press the RESET button.
Tried sfc /scannow => CBS.Log
2016-01-16 12:41:37, Info CSI 00004f4f [SR] Verify complete
2016-01-16 12:41:37, Info CSI 00004f50 [SR] Repairing 1 components
2016-01-16 12:41:37, Info CSI 00004f51 [SR] Beginning Verify and Repair transaction
[code]....
I have a SteelSeries Sensei mouse and a Razer BlackWidow keyboard. Windows 10 daily attempts to install a "SteelSeries ApS - Keyboard - SteelSeries Sensei [RAW]" update. The update fails within seconds of starting with error 0x80240016. The initial failure message darkens my screen (even when another program is full-screened) and shows a simple message, I don't currently have the verbiage and can't reproduce until Windows attempts automatically.
The update says keyboard in the name, but also says my mouse model. I'm sure it probably pertains to my mouse, but my mouse is working fine and this update fails regardless.
I've rebooted. I've attempted to install while a different mouse was plugged in. I've tried updating mouse and keyboard drivers automatically through the Device Manager ("device driver is already up to date"). I've installed keyboard and mouse drivers from the vendor sites.
Is there anyway to get Windows 10 to forget about this update and stop trying to install it?
For the past few days I have been having the issue were an update keeps failing in windows 10 so every time it re downloads the update it tells me that my pc is going to restart in about 10 minutes regardless of what I am doing and this is about at least 3 times a dat and it is extremely annoying.
The update is a thing called "microsoft malicious software removal tool" and windows wont let me disable automatic restarts or automatic updates and i dont even need this "update" because its just a virus removal tool which I don't need but windows wont let me cancel the update.
I had windows 8.1 and got access to new build of Windows 10 it started to install but the laptop got shut down mid upgrade then on boot up went straight to a black screen saying "restoring your previous version on Windows" and it has been stuck there for 3 hours, I have tried to use F8 and F11 to try and get to system restore but nothing works,
View 1 RepliesSo after a stressful day at school I got home anxiously waiting to get on my computer, only to find out that after a recent update my computer has completely stopped responding. Now in the first few hours of dealing with this problem I was able to access the Windows repair options, only to find out that all of them failed. I was unable to do a system restore, nor diagnose my computer or even nuke it.
Later on things eventually got worse because now I'm not even able to access the options to fix my computer anymore or even downgrade to Windows 8.1. All that pops up after my computer starts up is "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system.
The update creating this issue: Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3140743).These are the steps of the loop:
1) My PC downloads this update automatically in the background. I have no option to stop my PC from downloading it.
2) I am forced to install this update. There is no option for me to shut down/restart without having to install the update.
3) During the restart, I get a notification that my PC was unable to complete the update and hence the changes are rolled back and the whole process starts again.
This thing has been going on for days, wasting my time and getting on my nerves.Why is Microsoft so dumb?
A) If at all my PC has downloaded an update, why don't they save it somewhere on my PC till the update process is successfully complete instead of downloading it again and again wasting my bandwidth?
B) Why have they not given options to opt out of (downloading/installing) troublesome updates like this?
C) Is there a solution to this issue?
I need to get around the windows automatic update for my Lenovo T440s laptop. the update shows as failed several times in windows update. I never make it to any download screen. I am upgrading from 8.1 pro and all updates are installed.
View 1 RepliesI have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?
View 24 RepliesTrying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?
View 1 RepliesBasically I just got windows 10 and i noticed a windows update i tried it 3 times before restarting my computer and the update kept giving me this ...
Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063) - Error 0x80070643
Im using an activated version of Windows 10 but updates fail saying "There were problems installing some updates, but we'll try again later."
So far I have tried:-
Using microsofts fixit app, it said it fixed errors but the update still wont work.
Editing the registry - UX from 1 to 0
those are the main fixes I have tried plus some more basic ones.
My Windows 7 was updating to Windows 10. When it appeared to almost be done configuring a message appeared stating the Windows 10 could not be installed and it was restoring the previous version of Windows.
Well that did not work. The pc will not boot up now. Instead I get: "Windows could not start because the following file is missing or corrupt: <windows root>system32hal.dll Please reinstall a copy of the above file"
I hope I can add the file using the win7 dvd. I know I was getting low on hard drive space, but had cleared enough to have 4 gig or so free. It was either not mentioned anywhere or I missed how much hd space would be needed. Of course I am assuming that the install bombed due to this?
Have not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 RepliesI am trying upgrade to Windows 10 from my Windows 7 Ultimate. I downloaded and tried to install Windows 10 and it failed I got the error message 8007002c-4000d and when I tried to install it again Windows is saying - Windows isn't activated on this pc. use a product key to activate it before upgrading to windows 10. I don't know what my product key is but it shouldn't ask me what it is...
View 1 Repliesif i try to install the latest windows 10 driver it says it fails, then if i try to uninstall my current ones it says it fails as well. what am i supposed to do, my other display wont get recognized and my main display is not running at 1080p.
View 1 RepliesI triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 Repliesi having issue with windows store app that not updating 0x080073B0C update failed please try again.
i already tried uninstall the app, which cause me stuck, because i cant install it anymore i also already tried wsreset, not working i disable few stuff... tried turn back on but nothing working...
turn on back location/position function to on (i disabled it) also in local group policy , i set back to allow microsoft account (i set to block sign-in because i dont want to login)
i read that there is another method that stop windows update service then move/rename softwaredistribution... so windows update make new fresh directory i havent tried it, because it seems there is something wrong with the app itself and if possible i dont want to messing with system files.
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 RepliesMy computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
Everything has been working great until very recently. After the Cumulative update my computer has been going into the "Recovery" screen when the computer tries to go to sleep. The problem with this is that my Bluetooth mouse and keyboard does not work at that time.
After connecting a USB mouse and keyboard, I selected to restore from a previous point (before the update). Though the system went through the motions, it stated that the restore was not successful. However when it booted back up, the system was restored to an earlier spot. System found updates and installed which started the loop again.
How to stop the machine from going into Recovery mode?
I have
Dell XPS8700
i7 processor
32 gb of memory
64 bit system
256gb Solid State Boot drive
1) I can boot into Windows 10 fine from a cold boot.
2) When the computer tries to sleep and I get the Recovery screen, I can select the option to reboot the computer and it boots up.
3) Normally I do not need to enter my password. After I reboot from Recovery screen, I have to enter a password.
4) Also if I use the keyboard to place the computer into sleep, it does NOT go to the Recovery screen but sleeps like it suppose to.
I have restarted my pc at least more than ten times today so just i can connect for 10 or 15 minutes at once. this is the message from my connection trubleshooting: website (Microsoft Corporation) is online but isn't responding to connection attempts. Detected Detected.The remote computer isn't responding to connections on port 80, possibly due to firewall or security policy settings, or because it might be temporarily unavailable. Windows couldnt find any problems with the firewall on your computer. and this is another detail from the message:
Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Lenovo-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
I have tried resetting the internet through command prompt and by following youtube videos but it did not work. I've been having this problem for at least 2 days already.
My laptop has a finger print reader. Quite often this fails to recognize me. How can I increase the number of attempts that I am allowed?
Also why does 'Hello' get mentioned in the error message? Is there a facial recognition facility?
