Yesterday I updated my PC from Windows build 10240 to Windows 1511, but after that I can't connect to WiFi.
My wireless adapter (which is built-in the PC) doesn't find any routers...
When I try to search the solution with the Windows tool, for some minutes it finds the routers again, but if I try to connect to someone, after few seconds it disconnect automatically.
I tried to reinstall the drivers, but nothing changed..
Ever since the 1511 update last week, my SP3 display adapter crashes all the time. For example, if I'm using Windows Live Movie Maker, it will crash after only a few seconds of playback, then I have to close the app and reopen it, so I can get another 30 seconds of work done if I am lucky. If I'm using Blender or Repetier Host, it does better - lasts minutes instead of seconds, and doesn't always crash in those apps, but it does occasionally.
When I try to print to my 3D printer, it crashes sometimes, wasting plastic. I can get around that by doing the print from SD, but sometimes when it is something small, it's just easier to print from the host. Having increased problems (I used to get it occasionally, but not often) since updating to Win10 version 1511 last week?
When I initially installed Win10, it logged in with lightning speed (from the lock screen). After the update last weekend it takes longer to log in than it did with Win 7. or 8. How to speed up login time?
I'm running Version 1511 (OS Build 10586.3), 64 bit
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
I have been trying for a full week now, to no avail. Whenever I apply the update, it goes to the "Restarting" screen...and gets stuck there indefinitely. Even after a few hours, it's still on that screen. So ultimately I have to force shutdown my PC (after which I can use it as per normal). I also do not believe I have any malware on my PC (have scanned multiple times with Kaspersky just to be sure). I had updated to Windows 8 > 8.1 > 10 on this same PC before and never faced a single issue. I also never mess around much with default system settings.
View 4 RepliesI have a Surface 3 Pro with 2 external monitors hooked up using StarTech USB VGA adapters. Since the update, my mouse does not show up on my remote Windows Server 2008 R2 VM's when the Remote Desktop window is on one of the external monitors (works on the Surface Screen). The cursor is there, just cannot see it.
View 2 RepliesI have a brand new MSI QE62 apache pro, and I just installed an update to windows 10 (the computer came with win 10, so i cant revert back to 7 or 8) and after the update, I no longer have a visible wifi adapter in my network settings, and i obviously cant connect to wifi as a result.
View 2 RepliesSince installing the recent updates for Windows 10, every now and then my Wifi will just disconnect... Turning it back on is as simple as clicking on the Internet icon and clicking "connect" again, though I'm a gamer and when the connection drops out during games it becomes a real problem. My Wifi is set to connect automatically, but that tool seems to be ignored as it disconnects and stays disconnected until I manually click "connect".
View 4 RepliesI am unable to get on the internet via my wireless wi-fi network since a Win 10 update was pushed out to me yesterday, 12/16/15. I get a message to the effect that it took too long to log into my wi-fi.
I first upgraded to Win 10 from Win 7 about 2 months ago on my laptop. I experienced no issues until I was forced to reboot yesterday morning. It took about 5 minutes (or so it seemed) for the updates to install. Since then, every time I try to go to the internet, it times out regardless of which browser (Chrome, Firefox, Opera) I try. All other devices in the house connect to the wi-fi network okay, so the problem is not with my network.
I tried the suggestion that involved typing "REG DELETE..." in the command line, but that did not work
Laptop: HP-Pavilion Dv6-6c40ca
OS: Windows 10 (free upgrade)
Wireless adapter: Broadcom 802.11n (BCM9413HMGB)
I did the free upgrade from Windows 7 to windows 10 three weeks ago. It was a clean wipe/install and everything worked fine. I had working WiFi for three weeks.
Then I noticed windows updating itself when I powered-off the other night. The next morning my wifi was knocked out. Thew wifi symbol is still there, it just has a red circle with an x in it now. It doesn't show any networks. My other devices can 'see' over a dozen networks and can connect to my home network without issue.
Things tried:
-Uninstall/reinstall driver and restart
-"Roll Back Driver" and restart
-Download and install the latest driver from HP and restart
-Tried this solution to a tangentically related problem (that of people losing their WiFi directly after upgrading to windows 10)
Thoughts:
-the driver is very old (2012). the one from HP was uploaded in 2015 but when I click on the info I see it is issued in 2012
-Attempts to find the driver directly from Broadcom result here but these are all for Linux.. I am sure that Broadcom has windows drivers too, but how to find them?
(not sure how to link directly to image hosted on Google Drive. So this link is to a ss of my wireless adapters driver page in device manager) [URL]....
My problem is, that one beautiful day my Lenovo notebook with latest Insider Windows 10 (11102) stop working LAN (yellow triangle) and Wifi (after few minutes of connection gives triangle too). In case of Wifi, I can simply turn it off and on again and it works for few next minutes, but LAN stopped working completely. It says, that in this computer isnt any internet protocol, but in setting both (IPv4&6) are ticked. Lenovo sent me to heaven, because drivers are already included in Win 10, so I cant reinstall it. Uninstall of drivers for LAN and Wifi and automatic new install doesn't work for me.
EDIT: I already tried this, but there isnt any word about driver updates of my LAN and WIFI.
I'm on Win 10 (build 10240). I hadn't been getting updates for a while so did some troubleshooting and started to receive the updates yesterday, including the major November update 1511
But the upgrade didn't complete. It went to the booting black screen with a circle and number in the middle and progressed up to a certain point but then rolled back the changes. This happened twice and now when I check for updates, it says device is up to date and won't even show the 1511 update.
Once again, Windows 10 pro 32bit upgrade failed when it reached 71% installed.
I have an ASUS H81M-PLUS MB with intel core i7 processor.
As on previous attempts, a small window appeared with the caption "Microsoft Visual C++ Runtime Library" Below the caption was a small red circle with a cross in it and below that an uncaptioned button
Clicking on the button resulted in a message "Restoring previous Version of Windows" It then proceeded to do just that.
Having read other posts on this thread, for this attempt I disconnected all USB3 peripherals so that isn't the problem.
As per title.
Since the 1511 update I can't remove file properties from any video file.
It always says that the file is open in Windows Explorer...
When you start Windows 10 keyboard does not work since the upgrade to 1511
View 1 RepliesI am running Windows 10 Pro x64 that I installed as a full version (not from the free update, I purchased the full edition from Microsoft).Whenever I get a new OS I like to do a clean install so I used the Microsoft Media Creation Tool which I downloaded from this page. I used the Media Creation Tool to install the OS (wiped and created new partitions, installed the OS, etc.).
Now with this nightmare update they just released (Version 1511) I am having SO many issues. I would like to do another fresh install of this new version.If I use the Media Creation Tool again to create an USB installer will it contain this latest version (i.e. I won't have to go through the whole update process again)? Or does the Media Creation Tool only create a USB installer that contains the "base" operating system which will required updates all over again?If not, how can i create an installer for Version 1511 so that I can avoid the pain of updating?
I notice an unpleasant GUI-level change that appears after the upgrade to 1511. The issue seem to exist on all machines after 1511 upgrade.
Firstly, Google Chrome shortcut pinned to Start Menu now appears on dark gray tile, instead of the regular "color accent" tile. Is this a bug or a feature?
Secondly, an attempt to pin the Chrome-generated GMail shortcut to Start Menu immedaitely loses its dedicated icon and gets a regular Chrome icon instead. E.g. before the upgrade it was possible to pin the GMail link to the Start Menu and it would retain its GMail icon. After the upgrade it is no longer possible to keep the icon.
I was having the common problem updating to KB3122947, where it would simply fail to install. As far as I know, there were a few ways to resolve this, and I found the top answer here worked. Ever since, I've not been getting Mail notifications in the action centre, besides the fact that no settings have changed and I've checked both in the Windows settings and in Mail settings that they are enabled to notify.
View 1 RepliesI have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
For those people who CLEAN installed Win 10 using the Media Creation Tool, will it automatically update to Threshold-2 (version 1511 Build 10586.36) through Windows Update once installation had been completed? Or does that have to downloaded separately?
And what is the "KB" Number for version 1511 Threshold-2?
I am having trouble accessing MS app store and also updating office 2016 through any of the office applications.
My question is, will win 10 apps and office 2016 default update through windows update?
Bought a new PC that came with Win-8.1 and decided to jump direct to Win-10 with a clean install... no update from 8.1.
It worked fine for the first 3 weeks but within the last week when I do a Restart it goes into the "Don't turn your computer off while doing update" or something to that effect.
It restarts three times getting as far as 55% but the next time it restarts (the 4th time) message says "We couldn't complete the updates. Undoing changes". When it finishes it restarts again and finally boots correctly.
PS: If I do a Shutdown and power up again the it boots correctly... no restarts!
For the past few days I have been having the issue were an update keeps failing in windows 10 so every time it re downloads the update it tells me that my pc is going to restart in about 10 minutes regardless of what I am doing and this is about at least 3 times a dat and it is extremely annoying.
The update is a thing called "microsoft malicious software removal tool" and windows wont let me disable automatic restarts or automatic updates and i dont even need this "update" because its just a virus removal tool which I don't need but windows wont let me cancel the update.
Well only 'View installed updates' works. (the earliest shows only one of 21 November - I thought November had a big update. no?)Clicking these does nothing:-
Win Update Elevated Installer
Win Update settings
Advanced Win Updates options
Check for Updates
As I updated via this on another computer yesterday with no problem (except updating 4 items took over 4 hours!!) what can be my present glitch be?