Why Is System Restore Not Enabled As Default
Aug 3, 2015Is there a reason system restore is not enabled as default? Not needed any more/ is there now a better alternative ?
View 2 RepliesIs there a reason system restore is not enabled as default? Not needed any more/ is there now a better alternative ?
View 2 RepliesSince installing Windows 10 I've had a problem with System Restore. As you can see from the attached graphic, I can access the System Restore panel but System Restore for the Windows drive is turned off (orange box) and the means of restoring to an earlier restore point as well as Create are greyed out.
The ONLY thing the window allows me to do is to go to the Configure panel. When I get there I find that System Protection is disabled and I cannot turn it on. However, my system IS using some space (blue box) although I have a sneaky suspicion that has not changed since I installed W10.
My question therefore is really: how do I enable System Restore?
After writing the above I did a search in the registry for System Restore but there were only about six or seven references. I also had a quick look at Services and noticed that VSS was stopped. Following a search which revealed that System Restore might depend on it I started it. I then signed out and then back in again but I still can't get System Restore enabled.
I understand, that 10 relies on reset/refresh, but disabling SR is a bit drastic. Especially taking into account, how many flaws are in 10 right now, I wonder how it made RTM.
View 9 RepliesI have a back up of files & folders that I come from my previous Windows 7 system (same machine - I upgraded to W10) that I am not ableto restore and I really need them. My system is the following:
HP Pavilion DV7-6b32US laptop/notebook
64 bit
16GB RAM
2 internal HD (1 is the original 500GB and the other is a 1TBdrive divided into two equal partitions in the NTFS format
The back up was done using Windows 7 built in feature/utility and I am trying to restore the folders with their files to my Win 10 but I keep getting the error "short names are not enabled on this volume" with the code 0x80070131. I have done my research which pointed me to answers pointing to this: "to manually enable 8.3naming after formatting you can use fsutil.exe from the command line: fsutil 8dot3name set d: 0 (d: is the drive partition on my 1TB NTFS driveI use for my data where I am trying to restore the files to. The only thing I haven't done is the formatting for two reasons, 1 - it is already formatted and 2 - I have a TON of data already on the drive that I cannot lose.
I installed windows 10 technical preview yesterday . I found a problem with system restore. It goes through everything normally but after it reboots I get an error. In the details it says:
System restore failed to extract the original copy of the directory from the restore point.
Source: %ProgramFiles%WindowsApps
Destination: Appxstaging
An unspecified error occurred during system restore. (0x80070057)
Maybe I have a misunderstanding of how System Restore works. Yesterday I uninstalled a program that I'd like to now get back. The company that made the program no longer offers archive downloads for that program in particular. Today it occurred to me that I could do a System Restore to when the program was still on this laptop & all would be returned as it was.
The first 2 times I tried was a total fail for returning the program but when I went back to a week ago it was there. Something is missing & it errors asking for the old install software that doesn't exist anymore (the program was purchased it 2008).
How can one show the date and time in the system tray having the small icons enabled:
View 4 RepliesI have decided to go default with some of my Windows 10 settings. So, how to Restore the Default Windows 10 Start Menu?
View 9 RepliesI'm not sure what happened but I may have adjusted a window to a larger size manually. Anyway, my windows sizes are stuck on maximize. This Dell Inspiron 3537 came with the dreaded windows 8, concurred as awful by all users that I know...so I installed Windows 10 on it.
I have this weird thing about being able to use all the functions available?
My Start menu looks like this right now: I unpinned everything I don't want but now all my programs are showing. I don't remember it being like this originally so I think it must be something I've done when trying different things out.
What I want is to get it down to just the 3 apps at the top and not see any programs unless I click on All Apps.Is there any way to restore the Start menu to installation default so I can start over again, what registry bit I fiddled to cause this?
Trying to reinstall a WD MyBook external hard drive. Receiving the following "One or more network protocols are missing on this computer" Following diagnosis receiving "Restore network protocols to default settings", and "Windows Sockets registry entries required for network connectivity are missing". My computer is an HP Pavilion 23 all-in-one. My wireless router (connected with an Ethernet cord) is an ATT 67XHG8k.
View 4 RepliesI recently installed an SSD and I found out while running Samsung's OS Optimization disk that it has turned off System Restore by default. I of course can turn it back on, but I wanted to get feedback on turning on System Restore on an solid state drive.
View 7 RepliesAn update (very large) downloaded overnight. Now no e-mail; no AVG, no system restore and probably others I've not found yet. What are Microsoft Playing at. AVG will not reinstall and windows live mail will not start, even after reinstall.
View 3 RepliesSo I tried to download the Cevo Client. then I got a popup Where Familiar.exe, wouldnt go away after restarting so I tried system recovery. Now it wont restart at all and im trying different methods. Right now im trying to recover it to an even earlier version but I think its stuck in that screen since its taking forever.
View 1 RepliesI created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
So I was doing a system restore on my newly upgraded Windows 10. It was stuck at 46% so I restarted it (which was a stupid thing I know). After that the laptop won't go beyond the black screen. Whenever I boot the laptop the lenovo logo appears and the black screen after and that's it. I'm really worried now.
View 1 RepliesNoticed my System Protection was not enabled.
Can't click on the "Turn on......" Does nothing when I try to "Turn on...."
Attached a pic.
I have been using Windows 10 without any problem, until I did a system restore. When the computer rebooted, it would not recognize my password, even though it was correct. I have changed my Microsoft Account password, but that didn't work. I have the local account and the Microsoft account on the computer. Neither one accepts the password. I am using Windows 10 on two other computers without any problem. getting the computer to recognize the password? I can't get past the login window to access anything.
View 1 RepliesTrying to do a system restore to the recommend point and other points that I choose. A long time showing "System restore is starting". After about 15 minutes running in that mode, then I get a "System Restore Failed" Message that also says "The Writer's Time Out Expired Between The Freeze and Thaw Events. 0x800423f2"... Why this is showing up or how I can take it back to one of the previous restore dates.
View 1 RepliesI enabled system restore but i have noticed that when windows 10 updates occur a restore is not being created. On previous vesions it occured is there some setting i cannot find or does it no longer exist?
View 5 RepliesI usually see the restore points created by windows but it isn't everyday backup, so I want to do a daily restore point backups, I went to Task Scheduler >> Windows>>System Restore, there is a task already there, I changed it to be daily at 4am, and It's enabled.
I check everyday in history and I see that the job is successfully done, but if I go to restore points I don't see any of those backups except the ones which Windows creates randomly or after installations.
how do i schedule system restore point in win 10?
View 2 RepliesNew desktop computer - Windows 10 Home. In System Restore, Configure, the Max Usage slider is all the way to the left.What does that mean?The hard drive is 1 TB, so I'm not concerned about how much it uses.(On my old Windows 7 desktop, I moved the slider to the right and it now saves fewer restore points.)
View 9 RepliesHow to turn system restore on or off. I do Macrium backups frequently and absolutely do not need the system restore turned on. I turn it off and occasionally check back only to find it on again. Not sure what is activating it. I am going to start checking each time I boot the computer up in the mornings to see if it turns on every new boot. Just rebooted my computer and system protection isn't turned on. Wonder if updates or something is making default on or something.
View 7 RepliesI restored my system back a few days because my OS just started falling to pieces with errors. That issue is fixed, but now my windows isn't activated anymore. I have had no hardware changes, since i upgrades from windows 7 except changing the driver for my Ethernet adapter. My error reads Error code: 0xC004C003
View 9 RepliesIt was available and up to date before the upgrade. I have turned it back on. Why did the upgrade Build 10586 turn it off? I did use the Media Creation Tool to upgrade rather than wait for "my turn" with Windows Update.
View 1 Replies