Ok, I bought a 2tb Seagate external drive which I swapped in my ps4, and took the 500 gig drive out of the ps4 to use as my external drive for my laptop.
But, my problem is, is that when I put in the usb cord to connect my external hard drive to my laptop, it lights up, but it doesn't show up anywhere on my laptop. I've done the disc management, and nothing is showing up as well.
My laptop is an HP Pavilion g, came with windows 7 64bit, but did that upgrade for windows 10 64 bit. Why it wont show up on my laptop.
hard disk of a laptop with windows 10 used as external USB drive to another laptop and it workded but there are some problems that display is poor and shows windows is not activated but in my previous samsung laptop it was activated when i downloaded it freely from Microsoft. Other things are going smoothly till now.
I just received my MSI laptop with Windows 10 and I'm still feeling around on how to use the new OS (upgraded from Windows 7). I plugged in my ext. HDD and something popped up asking something along the lines of "What do you want to do with this?". I was like "Okay, everything's going fine so far."
The problem came when I wanted to eject my HDD though. I couldn't find the icon in the little notifications area with the arrow. I couldn't eject the HDD from "This PC" either. In the end, I just unplugged it, since there wasn't anything too important on it.
I've tried enabling "Quick Removal" in the device manager, but that checkbox doesn't even show up. Instead, it's replaced with the "Write-caching policy" options. I've also tried turning the notifications on in the taskbar, but that doesn't work either. I turned on task manager, safely eject..., and location, but none of them show up. I've restarted my computer as well.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
I'm trying to just run my laptop as a desktop, as the screen hinges are faulty. Its a Lenovo Y410P. I know how to switch the display to the external monitor in the control panel settings. But I want to make it so that I can put the laptop to sleep or restart the laptop, and upon boot up have the login be displayed on the second monitor exclusively.
Currently, when the laptop is started from sleep or restarts, it will display everything only on the laptop screen. Then I have to open up the laptop, switch settings and send it to the external monitor.
Monitor is a ViewSonic VA2265smh. I'm running this via HDMI cable.
I finally got me a BSOD on my windows 10, on laptop. I was tranferring some music files from my ssd on laptop to an external hard drive in a wifi hdd enclosure. The error is "EXFAT_FILE_SYSTEM (EXFAT.SYS)".The HD (WD10EADS) in the enclosure is formatted in Fat32, and I was thinking that might have something to do it the error. But the HD has to be in Fat32 in order for the WIFI enclosure to be able to see the HD, per the instructions of enclosure.
I have the new Acer Aspire laptop and a TV which I use as a monitor. They have worked together very happily some time now. But yesterday I had to do a forced shutdown when the start button would not work and the TV screen shrank in size and there were error messages. When I rebooted, the TV monitor stayed black and a computer screen came alive for about 10 seconds as it was rebooting, then went black. I disconnected the TV from the computer and started her up and the computer screen behaved itself.
Even if I set all of the display parameters to indicate only one screen (the computer screen), if the TV monitor is connected to the computer, I end up with two black screens.I have tried many display duplicate and extension.No new software installed.There is one clue. I disconnect the TV monitor from the computer, boot up, choose duplicates to display. Then I connect the TV monitor to the computer. What happens, for about one second, is that both screens light up.
I'm running B10074 on my laptop , and I connected my external display to it as well as my external keyboard and mouse at my desk so I could sit there and do the setup etc without moving all of that out of the way. I had the laptop lid shut and off to the side while I was doing this. Then, I shut the laptop down, unplugged all the external peripherals, and turned it on again. It went through the windows boot sequence with the spinning circles, then black screen.
After 20 minutes of frustration, I realised that the laptop would show a login prompt only when I plug in the external monitor BEFORE i start it, and only if the laptop is closed while it is booting (when the lid is closed during boot, the Dell logo and spinning circles come up on the external display)
I further figured out that in Control Panel, it only displays the external display, its like the computer doesn't even recognise the internal display anymore. I dont know why that would be since when I first booted it up and installed drivers, I was using the internal display and everything was working fine.
I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:
- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options - plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal - plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV - reinstalling nvidia and onboard-graphics drivers and update to the latest - Made a clean install of windows, tried windows 8 also but the same result - Updated my BIOS and EC - Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable
Ok so I recently updated to Windows 10 but now when I connect my laptop to my external monitor the laptop screen doesn't show up on the external monitor.
My laptop's screen is broken so I can't see anything. The laptop is still on the screen immediately after updating so I could blindly work my way through the update screens, but someone would have to upload pictures of the screens immediately after updating to Windows 10.
I have an external hard drive connected to my W10 PC. Sometimes when I boot (not all the time) I get an error message that the recycle bin is corrupted because the drive is showing as one of the drives that utilizes the recycle bin. It then asks me if I want to empty the recycle bin, which I do. I then go in and change the recycle bin properties to NOT include that drive path.
I have installed the latest build 10158 and have the same problem that I have had in previous builds,i.e. that my external drive is not showing despite being listed in Device Manager as installed and working correctly,have tried disabling re-enabling,uninstalling etc.etc. with no effect.
Windows 10 did an update on my wife's desktop that was incompatible with the Nvidia graphic drivers on it. As a result, the dual monitors no longer display. We took the computer to the local Microsoft store and they were fully aware of the problem and are working on it. But, after two weeks, the problem has not been solved. Meanwhile we bought a new desktop and had Microsoft empty the entire contents of the C: drive onto an external hard drive. They did and showed me that the external drive contained the root directory and program data that contains years of work using Lightroom.
I brought the external hard drive home and connected it. Luckily I can see the User Libraries but not the Program Data. Is there some way that I can make everything visible in the external hard drive so that I can copy the contents to the new desktop?
In the past few days my external hard drive makes the sound (windows notification) like when I unplug it from my desktop. Then about 5 seconds later I get another sound and notification asking me how I would like to view content for G: (my external hard drive). I only have it attached to use for backups and I've checked my back up program (easeus) and my backups haven't been happening either. I used crystaldisk to check it and it's healthy. Why it would be essentially shutting itself off and on?
I have a 3TB external hard drive plugged in to my pc. I use it to stream movies and music to a couple of media players in the house via our wifi network. Recently it has disappeared from my view on the pc. When I plug it in via usb, nothing happens, yet when I plug it in to my daughters laptop it is recognised, leading me to believe it is a setting problem with my pc rather than a problem with the hard drive. How to make it work again.
After receiving the W10 download, I installed a WD My Passport backup external drive. I made a system image backup and system repair disc of W7, and I backed up other files, and uninstalled & reinstalled BitDefender Total Security 2015. At first it seemed to run well or adequately, although slowly, notwithstanding that I had cleaned everything.
Then I discovered a message/warning from W10 that I should check the settings & do a backup, enable File History, that no usable drive was found, and to use an external drive for File History, and to connect a drive or use a network connection.
I googled all these issues to find answers/solutions: I checked in Device Manager, Computer Management, System Configuration. I was able to see that WD My Passport was displayed as running properly, with "healthy" status, with 866 GB of free space, and I could see it listed as in drive .
I think that I do not know "how to connect a drive or use a network connection." I clicked on "add network location, it opened to select a folder, I selected several, but none were acceptable, so I had to leave it the way it was, Network Location (1) My Media: Lizzie-PC.
I cannot get my external hard drives to give me write permissions over my local network in some directions.I recently replaced our hard drives with SSDs and with the reinstall, I had some difficulty getting the permissions on my external hard drives working correctly.
I did several Google searches and read a procedure that I needed to go through adding a user called "Everyone" to each of my drives that I wanted to access and share. I did this and gave "Everyone" full read/write permissions and also went into advanced options (or wherever it is) and chose the checkbox to give all child files and folders these same permissions. It took ages but eventually it all seemed OK.
I had one folder which could not be corrected this way and ended up having go change each file individually. Anyway, I thought I was all set but if I try to move a file from Machine A to Machine B (the drives are attached to , I get an error that I don't have permission to do this. No overrides or Admin permissions are an option and when I check the specifics it *is* correctly shared with not only Everyone but this machine as well (so it attempted to fix the permissions itself at some point). However, if I go to Machine B and grab the files from Machine A over the network ...
Today I installed Windows 10 TP on my old HP Touchsmart tm2 laptop. First it all went well, I was able to log in and search for updates (iso is the first build). But after a few minutes the screen went of for about 3 seconds (black) and came on again only to turn dark again, come back and turn dark again. There it stopped. It's not totally dark, back lighting is still on I think.
It actually felt like the laptop tried to switch to an external monitor 3 times until it finally managed to find one. But there is no external monitor connected! I tried to restart the pc several times but luck. I only get to the windows logo, after that I get a dark screen instead of the login screen. I also tried to actually connect an external monitor via VGA but it shows the same dark on the monitor.
I reinstalled Windows 10 TP and it all went the same way again. When I tried to start in safe mode, I was able to login but couldn't open any apps/programs, not even the start menu. Ctrl+Shift+Esc finally worked and I could then run explorer.exe and get to the control panel. How I can get this laptop to work properly.
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
Every time my computer reboots, some or all of the dialog boxes for my external drives open on the desktop. I am just wondering if this is an indication of something more serious going on or should I just forget it?