WiFi IP Address Has Disappeared From Teredo Tunneling Adapter
Aug 13, 2015Just upgraded to Windows 10 (big mistake??) and lost WiFi. Norton scan report indicates IP address has disappeared from adapter.
View 1 RepliesJust upgraded to Windows 10 (big mistake??) and lost WiFi. Norton scan report indicates IP address has disappeared from adapter.
View 1 RepliesI have a problem with Windows 10 Network Sharing feature. It assigns fine the IP address 192.168.137.1 to the network card that acts as the bridge to connect other computers to the Internet. But it's not working, and when one goes to the share NIC adapter and right-click on it and select PROPERTIES, and then from the list of it shows one select :
"Internet Protocol Version 4 (TCP/IPv4) then you see that everything is fine, the IP address 192.168.137.1 shows there and the subnet 255.255.255.0 also there. BUT ONCE YOU CLICK ON OK in that window, another Window POPS UP and a message saying:
"The IP address 192.168.137.1 you have entered for this network adapter has already being assigned to another adapter (in parenthesis it shows the same adapter that it's assigned in the SHARING tab in the main adapter), so there is not way to get out of that 'network card properties'. further down the message in that window says: DO YOU WANT TO FIX THE PROBLEM BY CHANGING THE IP ADDRESS FOR THIS ADAPTER? and the choices are: YES or NO
The command Line in an MSDOS window run as administrator: IPCONFIG /ALL doesn't shows any other virtual or real NIC with the IP address 192.168.137.1 except for the one that was assigned in the "Sharing" tab in the properties of the real NIC that connects directly to the ISP box.
I don't know if I have explained well this issue, but all I can say it's that no other network adapter has that IP address. I have a VirtualBox virtual adapter that it has an IP address totally different, the same as another Virtual VMWare adapter.
I even went to control panel > Device Manager > Delete both NIC's (the one that connects directly to the Internet and the one that acts as the SHARING network, and the issue remains the same.
I cannot use the Wireless Router to connect my tablets or WI-FI Cellphones.
I have several Operating Systems in the Same Computer to boot with, and Windows 8.1 for instance Network Sharing works fine in the same computer.
I'm running Windows 10 PRO 64bits
So after 2 failed attempts at installing Windows 10 on an Acer Aspire Z5801 PC, I finally managed to succeed. However, a new problem appeared after installation.The Wireless network adapter went completely missing. Windows does not detect its existence at all, it's like the PC doesn't have one installed. It doesn't appear in Device manager + isn't listed as an "unknown device". It's simply not there at all.The wired network adapter is there, but not wireless.
Installing the driver from Acer's website - I had to select Windows 7 64-bit as the version is all that's available for my adapter.I used a USB stick to transfer the setup files to the Acer PC. It said it successfully installed but still didn't appear, even after a reboot.Used a USB wireless adapter (Netgear) to see if it was an issue with how Windows 10 handles Wi-Fi - nope, that installed and worked fine.Scanning for Windows updates after using the USB adapter. Some updates were found and installed (no driver ones though), but still no Wi-Fi.
In the end, I reverted back to Windows 7 and what do you know? The adapter got recognised again.The USB adapter isn't a viable solution since it's required by another PC. I just used it for testing purposes.
i have recently upgraded to windows 10 but my wifi adapter is not working.
View 1 RepliesHow can I change my Cisco Cable Modem's Mac Address>
View 1 RepliesWhats going on with my tablet (WinBook). I've installed W10 few weeks ago since then never had any problems with it, but today I noticed I cannot connect to wifi. it's gone from Network settings, if I open "connection" icon on task bar I only see Airplane mode..Network adapter from Device manager is also gone. What to do now...
I did try this - connect to internet via Bluetooth from Lumia phone and with Intel Driver Update Utility scanned tablet, only thing it found is update for Graphics driver.. what else can I do?
I got my new Wi-Fi adapter today (TL-WDN4200) and in order to access its 5Ghz connecting capabilities, you have to download the updated drivers off the TP-Link website. I did just that. However when I go to device manager, right click my WiFi adapter and update the drivers. This error message appears when I click on the driver file: [URL] ...
I have windows 10 64 bit. Will that be the problem? since TP-Link has not released any official drivers for Windows 10 yet? Will I need to revert back to Windows 8.1 to access the 5Ghz connection?
Latest driver installed, StarTech USB300WN2X2D, Mediatek/Ralink RT3572L
View 9 RepliesAfter upgrading my Windows 8.1 to Windows 10, I had problems with Wifi It cannot detect Dlink USB WIFI adapter which was running smoothly in 8.1. I think it has compatibility issues, I had tried many time, but now back to 8.1. make of USB Wifi Adapter for smooth Windows 10 run
View 1 RepliesOk so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
View 1 RepliesSo yesterday my wi-fi started to turn off randomly for no reason, its not my internet connection becouse it works on other devices. Also i already tried ticking off power saving option on my network adapter, it worked for a while i thought, but after i restarted my laptop even though its still ticked off, its still turning off randomly.. (Also i noticed it turns off when i plug or unplug my mouse?)
Other problems i have:
1. Cant set opera as my default browser it asks me if i want to set it as default every time i open it and i always click yes..
2. Cant turn my touchpad off even though when i use fn+f9 it says its turned off..
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
changed from windows 7 to windows 10 unable to connect to wi-fi using netgear AC1200 usb adapter will not connect gone back to 7 works fine.
View 1 RepliesI've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
I've had some issues with a BSOD for over a year now, first when I was running Windows 8 and now still with Windows 10. It first appeared after I got a USB wi-fi adapter which I replaced with an adapter that connected to the motherboard, but the BSODs have not stopped.
I inquired about it a few months ago on several other forums. It was apparently related to some driver that the USB adapter installed (the name of which I can no longer remember), but I was unable to uninstall it or delete it without my wi-fi becoming unusable. I'm also unable to use a wired connection in my apartment, though I'm not sure that would even be possible if I deleted the driver. The error code I get is "bad_pool_caller", but I believe I used to get "irql_not_less_or_equal" as well.
For some background, the BSOD usually appears when I'm doing something intensive over the internet like watching video on YouTube or Twitch, streaming audio, etc.
Here's my debug folder: COLIN-PC-Wed_09_02_2015_214036_86.zip
OS: Windows 10 Home, 64-bit
PC: HP Pavillion g6 notebook
Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)
Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.
Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.
For 2 weeks I've been trying to upgrade my Asus G50VT laptop from Windows 7 home to WIndows 10 home. I have tried over 5 times using Windows Update and several times using the Microsoft USB/DVD installer. Everything downloads fine; and gets to the black screen with the "installing drivers" with a percentage going around in a circle. It gets stuck at 32% every time. I have to force shutdown the laptop and it rolls back to Windows 7...
There are no new BIOS updates available from Asus (laptop was released in 2009) the latest BIOS is already installed and from 2012. I don't see anything for windows 10 on the Asus Website.I have all external usb devices removed. I have tried shutting off my WiFi adapter and disabling / uninstalling Norton Security/Anti-Virus.I have sucessfully upgraded 2 other machines from windows 8.1 to 10 with no problem.
My partner uninstalled AVG and then found that the wifi wasn't working. Tried an ethernet cable, no good either. Then tried to roll back in W10, still no luck.
It seems that the wifi adapters have disappeared and it may be a common problem with W10. I can download a fix to a memory stick, but what will be needed to get back online.
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
Windows 10 is great and all but I've come across a really annoying issue: [URL] ....
For whatever reason, there's a lot of graphical glitching/lag while using Chrome, and only really in the address box. What's strange is I've reinstalled Chrome, reinstalled my AMD Radeon R9 280X drivers, and then gave up and tried using Chromium (which works but has weird graphical glitches on the web pages sometimes).
Microsoft Edge works fine and Chrome's web page rendering is also fine. How to fix this?
I got an email from someone I have several addresses for, with the Mail client showing just the name of the sender, not the address the mail was sent from. I want to reply to a specific address, but also to know which address the email came from in the first place. In Live Mail I could check the email details and get lots of info about the email, including what address it was sent from.
View 9 RepliesWhen opening my address book in Word 2007 to copy in an address, I get the message "Either there is no default mail client or the current mail client cannot fulfill the messaging request.."
This has worked repeatedly in the past. I have no problem using the address book in Outlook and Outlook is the default mail client.
I recently installed the free upgrade from Windows 7 Pro to Windows 10, but cannot remember if the last time my address book worked correctly was before or after I upgraded.
Where you can set a static IP address in win 10?
View 4 RepliesAfter I install cumulative security update 911567 for Outlook Express when i try to open it Address Book I receive an error message that resembles the following: Unable to open Address book. Address book may not be installed correctly
View 1 Replies