My partner uninstalled AVG and then found that the wifi wasn't working. Tried an ethernet cable, no good either. Then tried to roll back in W10, still no luck.
It seems that the wifi adapters have disappeared and it may be a common problem with W10. I can download a fix to a memory stick, but what will be needed to get back online.
Prior to upgrade to W10 I want to put my internet explorer contact info in a memory stick just in case but I have forgotten how.
View 1 RepliesJust upgraded to Windows 10 (big mistake??) and lost WiFi. Norton scan report indicates IP address has disappeared from adapter.
View 1 RepliesI thought I fixed this problem, until dec. 2nd when Windows 10 did an update.
All my drivers are up to date.
I removed my Anti Virus (Panda) and re-installed it, looked like it fixed it, but the next day it stopped recognizing my wifi connection again.
I am having a problem with the windows 10 upgrade service.
It keeps telling me my display adaptor is a Matrox adaptor but the actual adaptor is an intel motherboard adaptor.
No Matrox adaptor has ever been fitted (I have had the computer for 15 years (various new motherboards etc) and never have used a Matrox adaptor.
It wont let me upgrade as it says the adaptor is not supported.
I'm running a 64 bit Windows 10 laptop. On idle, the System process is showing a high memory usage of more than 150 MB, usually more than 200 MB. Using poolmon the pooltag SpDN showed up with a memory leak. It leads to the Intel Matrix Storage Manager driver, iaStorV.sys. How should I go about fixing the problem?
View 1 RepliesI have an HP DV4 Laptop(i5, 8GB RAM, 256GB SSD) that came with Windows 7, I recently updated to Win10. Everything seems fine except of the high CPU usage in System and Compressed memory. I narrowed it down to the Realtek Memory Card reader. I should also mention that right after the Win10 update two Realtek Memory Card Reader entries were in Device Manager with yellow exclamation icons.
I deleted them and had Windows install the drivers from Windows updates, after that everything LOOKS fine. And there's only one entry now.After a while I noticed the fan making a lot of noise, wasn't like that in Win7.Anyway, after hours of troubleshooting I eventually came back to the Realtek reader, sure enough after disabling it CPU went to normal.I have also downloaded the newest driver from realtek site.
Is there anyway to create a all in one install USB stick using the media creation tool. I have 2 pc's running windows 10 Pro and a laptop running windows 10 Home . It just saves me having to have 2 separate install USB Sticks.
I have seen torrents available but I'd rather create one myself so I know it doesn't contain any viruses etc.
I just purchased a new windows 10, which came as a USB Flash stick and Im curious if I can use it as an emergency boot USB?
in case computer wont boot normally?
How do I see, and access, a USB Stick, or an external HD that I plugged in ?
View 1 RepliesI am trying to create a system recovery drive on a usb stick using Create a recovery drive in Settings section.
But apparently I am missing many files such as winre.wim and install.wim as I keep getting error messages that I am missing files and instead am told to insert my Windows Installation dvd to get them. Since I have a Win10 Upgrade install from Win 7 Home Basic, I have no dvd install disk to either copy those files from or use as a rescue dvd, and I looked back at Win 7 files on another drive, and the .wim files are not in 7 either, as that was a Dell reinstall dvd (still have that), but no such files there either.
So can I get Mr. Gates home # in case I need to rescue my OS? My past behavior tells me I WILL need to rescue my pc sooner or later, & maybe this time I can be prepared.
I have a small laptop which does not have a CD. I am trying to create a system repair disc onto a memory stick. It worked on Windows 8 before I upgraded to 10. How can I create a repair disc on the mem stick?
View 4 RepliesEvery time I start my laptop the Touchpad setting of my Synaptic V1.7 on SMB port changes back to the default settings. I can't work with the default settings. I tried updating it but nothing changed. I asked this in another thread but got zero replies.
View 2 RepliesWhen ever i hold a key down for 10 seconds the pc beeps, then the key repeats till i click that key twice. i have been trying to turn this off so i can play some games.
I have tried turning off filter keys and sticky keys in both the ease of access screen from settings and "Control PanelEase of AccessEase of Access CenterMake the keyboard easier to use".
How to make my keyboard normal again
Downloaded Windows 10 ISO, created a bootable flash drive using "Windows 7 USB DVD download tool" which I also got from Microsoft.
Set first boot device to USB in BIOS.
Saved changes and turned laptop off.
Turned it back on, with the flash drive plugged in, but computer boots to Windows 8.1 instead of the Windows 10 installation.
Restarted again, and pressed F9 to show a list of boot devices, it just shows OS boot manager, and DVD drive, not the flash drive.
Tried with Windows 8.1 USB installer, same thing happens.
Went back to BIOS, enabled "Legacy Mode" and turned off "Secure Boot", restarted, the computer can now boot to the USB stick.. for both Windows 8.1, and Windows 10.
Disabled Legacy Support, the computer fails to boot to USB devices again.
So, I cannot boot to a USB device if I have Legacy Mode disabled in my BIOS.And if I boot using Legacy Mode, Windows wants to convert my GPT HDD to MBR.
How do I boot to USB using UEFI instead of Legacy?
In Windows 7 I could copy my network settings to a usb stick and transfer it to another machine just by clicking on the file generated - really simple. But I can't find the same option in Win 10 -
View 4 RepliesMy Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've tried to change it but it continues to be the same "selective Startup". This makes me uncomfortable cause possible future problems.
View 8 RepliesMy system install of build 10162 won't activate, as they pulled the validation from these builds. Unfortunately, I can't upgrade to 10240, which can, I was told by Windows support, be activated. This is because Windows isn't already activated!!! (Windows Update won't download it (it always stays at 0% )).
To solve this, I want to upgrade manually and thus I flashed the ISO on a blank USB stick. Can I keep all my data and app settings, etc. if I upgrade using the ISO on the stick? Or, in other words, is it possible to "upgrade" when installing an ISO, or do I have to do a clean install?
I work with HAAS CNC lathes and mills, which only accept FAT16-formatted USB drives. I have an old 2gb drive that is starting to fail so I got a new drive. problem is the smallest size I could find is 8GB, which is too big for FAT16. I tried using Disk Management but the resize option was greyed out. Is there any other tool I can use?
View 4 RepliesCurrently I installed Windows 10 Pro build 10586.0 from my USB flash drive created from the Media Creation Tool (MCT).My question is, I noticed that Microsoft has recently updated the MCT to the latest build.Before I decide to put this latest build onto my USB flash drive using the MCT, do I need to reformat my USB or will the MCT do the whole process for me by overwriting all the current Win 10 boot and setup files that were on my USB?So right now, I have all the Windows 10 bootable files created from the MCT, but the build that I have on there now is 10586.0.
So if I decide to create another Win 10 bootable USB using the MCT (Build 10586.36 or higher), will the MCT do all the reformatting automatically or do I need to manually reformat my USB myself before running the MCT?
there is one thing I do not unmderstand when creating a USB Stick using the Media Creation Tool: I can have both flavors, i.e. x64 and x86 on one Stick, but not Home and Pro, why? I thought this is simply a flag that can be set.
My task: I have to update several PCs with one USB Stick, running former versions of Windows of all kinds, i.e 32 and 64 Bit, but also Home and Pro. Do I really need to create two sticks, one with Home, one with Pro, or can I change that somehow in a configuration file on the stick?
I bought a new SSD drive and used it to replace my old slow HDD in my laptop. I have just successfully installed windows 10 on it.
During the step shown in the picture below, I clicked on "New"
Which brought me to this step
From here, i just chose "Drive 0 Partition 4", clicked "Next", and the installation began.
Now here is my question, does it make a difference (or is it better) if I had chosen to format "Drive 0 Partition 4" first and then install? cuz my friend is saying that I should always format before installing Windows.
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
I have a Toshiba Satellite and I'm running windows 10. I've tried pressing F5 and FN+F5 but nothing happens. I've had a look on various forums and all the advice seems to start with "go here", "go to this menu" etc but how to go anywhere without a mouse.
View 9 Replies