So i updated to the preview last week, since then, my wifi connection speeds have gotten worse..Perhaps it is a coincidence, but i dont think so since i still pull pretty good speeds on my iphone, but on my lenovo all in one, speedtest it is like 2 mbps. Prior, it would be 25-30, i haven't moved it either.
After installing windows 10 preview I can't connect to Internet? No problem connecting access point but no connection to Internet. Installed on a Dell laptop.
I ran into something strange this morning when I logged onto my computer: I couldn't connect to my wireless network anymore.
Fairly standard, I thought I'd go reset the router and have it be done with, but then I noticed that my phones were both still fully connected. (2 android phones on different OS versions). So my router itself wasn't have a problem, and I was still receiving internet.
I restarted my computer, as any good human being does, and the problem persisted. I then 'forgot the network' and restarted. Typing in my password again and trying to connect, didn't work.
I then remembered I had recently updated Windows 10 #sillyme (Not like I had a choice anyway x_x) So I thought maybe the driver had been updated. Nope. I even tried uninstalling the driver anyway and restarting. Nothing changed.
OK, so then maybe it's my hardware that's going bad? Luckily I have a dual boot So I booted up Ubuntu instead of windows and bam, everything is working perfectly. Absolutely no problems with connecting to my network.
Can't connect to WiFi network. I've already tried: restarting computer, forgetting the network, and uninstalling the driver. Also, it's not hardware as I can connect on the same machine using a different OS.
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.
My computer obviously "remembers" the password for the WiFi and i used to be able to just unplug my hub and it would automatically connect to the WiFi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the WiFi however it says "limited" and no websites work, effectively not connected even though it says it is.
To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
I am experiencing Problem with the wifi connectivity after I updated my Dell Inspiron 15 3521. I updated the Dell Wireless 1703 802.11b/g/n (2.4GHz) to the latest and tried every steps I could find in the blogs, youtube and communities talk but still couldn't fix the problem.
I'm using a HP r046tu laptop windows 10 which I've updated it. So my is when every time I'm going to boot my laptop to use it. My Wi-Fi connection is too low and it doesn't suggest any available routers in my house. I've updated all my drivers a prior to the Windows 10 update
Normally my WiFi connection is like 40-50 Mb/s, but it slows down to, like, 10 Mb/s or so with BT on. That maybe does not sound bad, but often websites are taking ages to load. I switched my router to 802.11n; even if that worked, the improvement is hardly noticeable.
What is best is that it is not always the case, sometimes the Internet speed is just fine.
I cannot download the drivers for Windows 10 from the HP website (they are not there), although they were available.
Can the Internet speed be amended with some Windows setting change?
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.My computer obviously "remembers" the password for the wifi and i used to be able to just unplug my hub and it would automatically connect to the wifi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the wifi however it says "limited" and no websites work, effectively not connected even though it says it is.To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
The same problem also occurs in reserve if you get me. Disconnecting the Wifi and then plugging in the hub, it also says limited connection until i restart the comp. Virgin Media have been of no support whatsoever, to be honest I didn't expect them to be as it seems like a computer/windows problem.
My laptop is for some unknown reason not connecting to the internet via wifi or ethernet. It will also not diagnose the problem as it says The Diagnostics Policy Service is not running and it cannot fix it.
I recently changed my wifi Mac Id using Technetium as my original ID got blocked. I had to reinstall the drivers and restart the PC to get the Network card working. But that it is fine, the Wifi connection disconnects every 5 minutes or so. I have a Broadcomm 802.11n adapter Driver version: 7.35.290 dated 6/07/2015.
I was attempting to figure out how to fix my internet connection, and there was an option which said disable, which i thought would temporarily disable my connection and allow me to simply reconnect. i hit that disable button, and all of the wifi disappeared from my laptop. I physically have turned the wifi on and off multiple times, but the internet connections box wont even show a wifi option. i connected with an ethernet to the internet, and it works fine. I don't know how to reenable the wifi on this new windows 10 system, since i just got it yesterday. i am using an older acer aspire 5742-6814 laptop.
I'm currently experiencing loss of internet connectivity. My wifi is working on my other devices, phone, iPad etc. but on my Windows 10 laptop the wifi signal shows as "limited" and I have on connection.
I have a laptop with Windows 10, and it has been working fine for months. Yesterday I thought I had a connection issue with the Internet, and set the computer aside until it was resolved. Later I checked my phone, and saw that the WiFi is actually working just fine. I have restarted and reset and tried to connect to Hotspots and all sorts of netsh commands.
After the free upgrade all worked properly, then i did a clean install (format) with a bootable usb that i made from media center. 6 days now no Internet connection, no wifi option. I think its the common problem with Wifi on Wos 10. As you realize i have only the windows files in my hard drive, the driver for my wireless adapter (Airties 2410) and the intel management center driver. I tried everything from the many possible solutions but not luck for me, even installing older drivers for my wireless adapter.
I have a 3 year old Dell Inspiron 15R 7520 laptop with an Intel Centrino Wireless-N 2230 adapter.
Since upgrading to Windows 10, the wifi connection drops out when using battery power and the only way to restore it is to restart the computer using mains power.
"Allow the computer to turn off this device ..... " is unchecked.
I am not the only one with a Dell 7520 laptop running Windows 10 that has this problem.
I was upgrading from WP8.1 to W10 and all was going fine but then my internet connection went off for about 1 minute and then back on. Ever since that happened, the phone has been restarting (Nokia logo) and then the cogs are displayed for abt 15 seconds and the phone switches off. It repeats this if the USB cable is plugged in. I cannot use my phone.
I upgraded from windows 7 to 10-when finished there was a red cross through the wifi icon.Having read numerous forums,I established that there was no old VPN software;I updated the Broadcom 802.11b/g/n software and in network adapter properties,I unticked power management switching off the adapter;also,altered bandwidth to 20_40MHz.As soon as I clicked on that,the wifi switched on!It then works until the computer is switched off;when on again,same problem.If I go to network adapter properties,and disable and then re-enable the adapter,wifi comes on again.
I have a brand new HP laptop that came with Windows 10 home installed on it. I have downloaded and applied all updates from MS.
I use a Wi-Fi connection to my Time Warner router. I have everything setup and things seem to be running fine.
Here's the deal.
I thought I would try and use my blue tooth external speaker. (Just to see what would happen.) I enabled Bluetooth.
StartSettingsDevicesBluetooth.
After I move the slider (so the status reads (On), .... I see a message that reads "Your PC is searching for and can be discovered by Bluetooth devices".
Two things happen:
The "search" never seems to end. And I lose WI-Fi connectivity.
I finally, move the Bluetooth slider to the "Off" position and my Wi-Fi connectivity returns.
I "do" see my external speaker. And it does work. (As long as "Bluetooth" is enabled.)
But of course, I then have no Internet connectivity and THAT becomes an issue for me.
My computer (XPS 13) came with Windows 10 installed. It's very finicky about wifi. The computer thinks it doesn't have a wifi adapter at times. Drivers are current, and the adapter came brand new in the brand new computer from Dell, so you'd think it would work.
At home, it often takes at least one reboot to get a good connection. And often it will drop the connection after a while anyway. We even got a new router to see if a more modern system would work... not much.
At work, it connects and stays, but doesn't remember the connection so I have to tell it to connect on most days.
When traveling, it often won't connect to wifi no matter what I do. If it looks connected, it only says "limited" and no amount of forgetting the network and rebooting the computer changes that.
Initially windows 10 was running fine until suddenly (I'm using Chrome) errors such as "DNS_PROBE_FINISHED_NO_INTERNET" started occurring, while periodically the wifi kept disconnecting . After searching for and following some solutions this issue was fixed however now the internet is very slow. Admittedly I'm not technically adept at all however I believe something I changed may have made the wifi slow. I did the following things:
- Cleared chrome's cache - Changed the DNS to google's 8.8.8.8 and 8.8.4.4 (which I am currently using) from the default (IPv4) - Tried to update network adapter drivers (said there were no new versions when using the 'automatic search') - Used cmd to run commands such as "ipconfig /flushdns" - Tried performing a clean boot - Also followed these instructions [URL] ....
On [URL] ... download speed is 0.39mbps. Upload speed is 3.75mbps. Ping is 8ms. I use fibre so previously it was very fast.
If this problem can't be resolved I'll just have to go back to windows 8.1, the internet is unbearably slow.
I had windows 8.1 and had viber installed. Then i upgraded to windows 10. still viber worked. I had to delete viber app and after reinstalling it, it doesn't work. It says "No connection to activate viber account". But I'm Connected to WIFI and it works with other apps. Is this due to compatible issues or something wrong with the app?
OS: Windows 10 Home, 64-bit PC: HP Pavillion g6 notebook
Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)
Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.
Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.