Windows File Corruption Can't Be Fixed With SFC Or DISM - 0x800F081F

Aug 12, 2015

I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them.

Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:SourcesInstall.esd:1 /limitaccess both came up with the error 0x800F081F.

Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.

View 3 Replies


Similar Messages:


SFC File Corruption And DISM 0x800f081f Error

Aug 15, 2015

I had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
 
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.

 cbslog.txt   3.79MB
 dismlog.txt   447.82KB
 SFCFix.txt   926bytes

View 8 Replies

DISM Error - Source File Cannot Be Found Error 0x800f081f

Nov 16, 2015

I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.

View 4 Replies

DISM Ends With Error 0x800f081f

Aug 10, 2015

After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
 
Here's my SFC log : [URL] ....

View 3 Replies

Performance :: Error 0x800f081f When Running DISM

Nov 9, 2015

I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.

I run DISM and I got the following error message:

1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f

The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:WINDOWSLogsDISMdism.log

So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.

2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess

Deployment Image Servicing and Management tool
Version: 10.0.10240.16384

Image Version: 10.0.10240.16384

[==========================100.0%==========================]

Error: 0x800f081f

The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

The DISM log file can be found at C:WINDOWSLogsDISMdism.log

Here is the log file [URL] ....

View 5 Replies

DISM Ends With Error Code 0x800f081f And SFC Can't Repair Files

Aug 29, 2015

I just upgraded to Win 10 from Win 7.
 
I get Error 0x800f081f when run DISM.exe​ and it states the source file can't be found.  When I run SFC scannow I get nine files that can't be repaired.

View 14 Replies

Source File Cannot Be Found Error 0x800f081f

Nov 9, 2015

Trying to fix this error I am getting it says the procedure called failed everytime i try to open my file explorer on windows 10 so i ran some of these cmd prompts that someone suggested an this is what it is telling me the source file cannot be found error 0x800f081f. here is the log file that cmd saved for me. I even did a computer reset that did not work the error came back again.

Attached Files : dism.log   214.54KB

View 3 Replies

SFC And DISM Error When Trying To Fix Corrupt Windows Files

Aug 3, 2015

I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.

I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.

I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).

View 2 Replies

Windows Corrupted Files SFC And DISM Image Recovery Fails

Aug 2, 2015

I have been trying to fix my windows 10 corrupted files but I have been unabled to recover it. I tried every possible way of recovering using DISM commands, but to no avail. I tried also the sfc /scannow but as usual this command hardly ever fixes issues regarding corrupted files. I have tried using dism in several ways by specifying the location and the install.esd file from my usb flashdrive windows copy and even tried the health commands on powershell..still wont work. The first command I tried and for all of them I get the same error message, which looks like this:

C:WINDOWSsystem32>DISM.exe /Online /Cleanup-image /Restorehealth

Deployment Image Servicing and Management tool
Version: 10.0.10240.16384

Image Version: 10.0.10240.16384

[==========================100.0%==========================]

Error: 0x800f081f

The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see [URL] .....

The DISM log file can be found at C:WINDOWSLogsDISMdism.log

I have heard people saying that I need to refresh my pc as a last solution and I don't want that since I have all my settings and programs migrated from the upgrade...

I have been reading on the web that there is a way of specifying the packages missing via command and then download them manually..

[URL]

View 6 Replies

Setting A Fixed Location

Aug 13, 2015

I use a VPN and Cortana and the OS thinks I'm somewhere else. Is there anyplace to put a zip code to force the OS to think you're in a specific location?

View 2 Replies

Customization :: Cannot Recognize Outlook Or IE With Fixed Font

Aug 17, 2015

Cannot recognize Outlook or IE with the fixed font,dull 3 themes and everything is black or white.Is there any tweeak like Windows Blinds or similar software ?

View 3 Replies

Customization :: Fixed Folder Icons For OneDrive And Podcasts

Aug 14, 2015

What my user folders looked like at first: Notice how the OneDrive and Podcasts folders stick out due to the Windows 7/8-style folders icons. So I found an alternative OneDrive icon in the image shell32.dll in C:Windows, extracted it and used that one (Windows 10-style icon). Then I created my own podcasts icon. I used the Windows 10-style folder paired with the Zune podcast icon to create my own custom icon. Here's the end result:

All of the folders match, now!!If you're interested in getting your hands on these folder .ico files yourself,

1) Download the ico files to a permanent location

2) Start with C: then navigate to the parent folder of the folder you want to customize (like C:Users[USERFOLDER])

1. Right click the folder, select Properties

2. Select the Customize tab

3. Click "Change icon..."

4. Then click "Browse..." and find where you saved your .ico file, and select it

5. Click OK.

View 9 Replies

BSOD :: Multiple Error Messages - Corrupt Files Can't Be Fixed By SFC

Jan 9, 2016

I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.

I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.

View 5 Replies

Apps :: Net 3.5 Framework Cannot Install 0x800F081F

Aug 15, 2015

I tried everything that can be found on the internet, i tried to download from microsoft website, no luck, tried the offline install with the win 10 installer, nothing worked.

View 9 Replies

Installation :: Fixed Drive Letter Designations After Dual Boot Install?

Jun 17, 2015

I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.

My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.

On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.

I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO

View 1 Replies

Graphic Corruption When Nothing Moving On Screen?

Aug 6, 2015

When I am doing something that is moving on the screen, including moving the mouse,having a loading bar move or a blinking cursor, my screen is fine. However, once nothing on the screen is moving for about 2-3 seconds, the screen becomes corrupted and a graphical mush. Once I move something again, like my mouse, the screen goes black for a second then returns to normal, as if nothing has happened. The display will not update itself out of this issue if a key is pressed on the keyboard, unless that prompts another screen, like ctrl+alt+delete.

View 2 Replies

Installation :: Image Corruption - Even After Reinstall From ISO

Apr 14, 2016

I have upgraded directly from a Windows Ten Pro ISO downloaded directly from Microsoft, but both sfc /scannow and Dism "restore heallth" run from an elevated prompt report that they cannot repair the image errors. Windows support simply says to "reset" from Update and Security from the Settings menu, but this machine was running CLEAN Windows 8.1 (sfc /scannow or DISM commands reported no errors) and resetting as they suggest will (at a minimum) mean that all of my installed software will be entirely lost.

I am desperate for a person proficient in restoring the integrity of a Windows Ten Pro image (have tried BOTH reinstalling directly from the downloaded ISO (multiple times and from re-downloaded ISO's and doing in-place upgrades). Both methods report the same errors upon reinstallation or in-place upgrade methods.

The running image is corrupt, corrupt, corrupt. What are the command(s) to restore it to health, as was the case with the previous clean 8.1 that was running before the upgrade???

Both Sfc /scannow and DISM restorehealth report that the image is repairable, but it is beyond my understanding how to do do.

View 9 Replies

Laptop Corruption - Screen Blackout

Mar 7, 2016

I decided to upgrade my laptop to Windows 10 today. After a few minutes, my mom came in and started pressing the power button. Now the screen is all black. I restart it, and I could hear the start up sound and everything, but I can't see anything besides blackness. I believe my laptop is corrupt but I don't really know.

View 1 Replies

Apps :: Word Document Corruption After Installation?

Aug 23, 2015

After installing Windows 10, I reopened some Word documents that have been an ongoing project for the past 8 years. They are long and complex documents including images, artwork and Chinese characters. I found that the formatting of these documents has been completely ruined! Everything has been moved around, some characters have been layered onto of one another and to top it off, the two fonts used for the entirety of the documents have been changed to another plainer font.

After checking the Word fonts, lots of them have disappeared, including the ones I use, and when I tried to import one of the old fonts in from a back up file, Word simply did not recognise it! Does Windows 10 automatically update to a newer version of Word when you install it? Is there any way to revert back to the way these documents were before the update? Manually reformatting them will take an estimated 1-2 years of work I tried looking at doing a system restore but there are no pre-saved restore points so haven't had any luck there, don't even know if it would work anyway..

View 4 Replies

BSOD :: Random Reboots - Critical Structure Corruption

Dec 17, 2015

I was getting a random reboot about once every 36 hours, this is the 1st time I got a BSOD before rebooting

All I was doing when the BSOD hit was listening to music using Spotify

I've replaced the power supply and reinstalled windows. I also ran Memtest86+ no issues reported

DESKTOP-K4P77GV-Thu_12_17_2015__14648_04.zip

View 9 Replies

BSOD :: No Apparent Reason - Critical Structure Corruption

Aug 26, 2015

My computer was working fine with Windows 10... but has developed a BSOD issue. I can't think of any changes I've made/programs installed etc, though this is likely the cause. I've run SFC /Scannow along with dism.exe /online /cleanup-image /scanhealth &dism.exe /online /cleanup-image /restorehealth

Everything says it's fine... but I'm still crashing. I've attached a copy of the file created as requested... but I'm very much at my wits end.

WINNIPEG-26_08_2015_190423_22.zip

When first running Scannow, it showed an issue with this file: MicrosoftEdgeSquare44x44.scale-125_contrast-white.png, which I have replaced with another version.

View 5 Replies

BSOD :: Error 0x109 - Critical Structure Corruption (YouTube Playback)

Aug 8, 2015

I have this BSOD while playing youtube.

crash dump file: C:WINDOWSmemory.dmp

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)

Bugcheck code: 0x109 (0xA3A01F5A6788B6B1, 0x0, 0x4CA3D042862E2DA4, 0x101)

Error: CRITICAL_STRUCTURE_CORRUPTION

Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.

This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.

The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

KELVIN-PC-Sun_09_08_2015_113755_86.zip

View 1 Replies

Errors When Using SFC Or DISM

Sep 8, 2015

If I run SFC it tells me I have corrupt files that it can not fix. When I tried to use DISM checking health says the files can be repaired yet if I run DISM with /online feature with out a source it says the same thing if I run it with a source which is it can not find the files needed. I have attached the CBS log and DISM log below in

View 4 Replies

SFC And DISM Not Working

Mar 3, 2016

I have an issue with my sfc and dism, as stated above. The issue started when i went to add windows features i get nothing but a blank box. Thinking there was some kind of corrupted file I ran a sfc scan only to get this, Beginning system scan.  This process will take some time.

View 1 Replies

Performance :: SFC Not Working And Neither Is DISM

Nov 15, 2015

I have a very old laptop, but despite the age it has worked relatively fine for my needs with just an HDD change. I bought this at the very end of Vista lifespan with an almost immediate Win7 upgrade offered. I then skipped Win 8 totally, but rolled a Win 10 when it came, and it has been working well. But you get the picture. This machine is old.

Onto the point: I'm getting an occasional fan rev up, with the CPU at 100%. The process is Service Host: Local System (Network Restricted). Recently, I also lost all sound on the computer, which chkdsk /f /r was able to salvage. I have a feeling these might relate to a same problem.

I researched, and found out that sfc /scannow will work. OK. It starts the verification process, but fails at 18% saying corrupt files exist. When I export the sfcdetails.txt from the log, it does not really report which files are corrupt so as to replace them. 00000e22 [SR] Beginning Verify and Repair transaction and then the logfile ends.

Because I cannot complete SFC, I'm told to run DISM, and that is how I ended up here. When I run Dism /Online /Cleanup-Image /RestoreHealth

Image version 10.0.10240.16384
At 20% an error 1726 with remote procedure call failed.

So I go to dowload the ISO and mount it. It will then give me the .esd

So I'm having my fingers crossed while running Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:SourcesInstall.esd:1 /limitaccess

View 1 Replies

Performance :: Source To Use For DISM

Sep 11, 2015

I have a Lenovo W530 laptop, that started with Windows 7 Pro, then got upgraded to Windows 8, then 8.1, and now 10 Pro.

I have the factory setup disks for only 7 and 8.

I ran DISM and it says the source files could not be found. From a similar problem several months ago, I sort of know how to work with DISM, but if it is looking for Windows 10 files, where would I point DISM ?

My next step is to use the log files, and attempt to find which files are corrupted.

View 9 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved