Windows Service Connection Failure
Nov 5, 2015
I bought a new PC a few weeks ago with Window 10. Worked fine for a while and now when I switch on and type my password I get a message in the bottom right hand corner of the screen stating "Failed to connect to a Windows Service"
I googled this problem and the advice given was to run the command prompt as an administrator and type netsh>winsock reset
However, when I right click on the command prompt icon and click run as an administrator nothing happens. A few minutes later an error message pops up on the screen stating "The service did not respond to the start or control request in a timely fashion"
If I left, click on the command prompt icon the command window opens immediately.
View 2 Replies
Similar Messages:
Oct 18, 2015
after recently downgrading and then upgrading back up to Windows 10 I experienced yet another problem. Now I have no remote access connection manager service. This was discovered by a technician via live support trying to create a VPN connection.
The other problem I have is installing virtual machines. Here are a couple of screen captures with the error messages here:
I don't want to resort to doing a complete clean re-installation of Windows just yet. Furthermore I also did come across [URL] and was wondering if that would bring me back to a normal functioning Windows 7 as even downgrading from Windows 10 in the past seemed to have caused some problems.
View 6 Replies
Nov 24, 2015
Perhaps I am a little daft on homegroups, but all I want is to have 3 ethernet connected machines in my house and one Wifi laptop to use a homegroup. However every time I attempt to create the homegroup and then join the homegroup with a second pc, the second machine tries to connect and then windows comes back with the message that "Windows no longer detects a home group on this network". So I delete the home group from the first machine, turn both machines off and try it again only to get the same message. I have let Windows trouble shooter try to solve the problem but of course it doesn't. I have made sure that my firewall (Bitdefender 2016) is not preventing the other IP addresses from seeing each other. I have done this 5 or 6 times to no avail. I thought it was supposed to be easy to get a few pc's to share files but this wonderful homegroup tool does not appear to work. I am using a Lynksys WRT 1900AC router with a Lynksy WRT 8 port switch and all the machines are connected via ethernet except the one laptop.
View 10 Replies
Feb 23, 2016
When I turned on my Windows 10 Desktop PC this morning, it said it failed to connect to a Group Policy Service or something similar to that.
This is my Desktop PC. It's a Acer Aspire XC603G Desktop.
View 2 Replies
Aug 1, 2015
So I've gotten fed up enough with the terrible windows search system.
I went into services.msc and disabled the windows search service; then restarted my computer.
However, "Cortana" is still listed in my task manager taking up 50mb of memory.
How do I kill Cortana?
View 9 Replies
Apr 14, 2016
I have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
View 6 Replies
Nov 15, 2015
Earlier today I tried to rebuild the windows search index, only to find out that I currently have no locations indexed. I also cannot modify to add any new locations. Windows search troubleshooter shows the following results:
I went to services and tried to start the windows search service, only to be given an error message about the path specified not existing. This doesn't make any sense because I can literally see the windows search executable:
View 1 Replies
Dec 7, 2015
The Windows Image Acquisition (WIA) service terminated unexpectedly. It has done this 1 time(s).
That's the Event Viewer error message at every reboot (appears to occur during the shutdown phase).
There is a concurrent fault listed for the Canon scanner driver, CNC210C.DLL, which is not corrupted.
View 7 Replies
Nov 4, 2015
After logging on I get a popup message saying, "Failed to connect to a windows service. Windows couldn't connect to the Group Policy Client service. This problem prevents standard users from signing in"... How do I rectify this problem.
View 2 Replies
Aug 20, 2015
Every time I switch on my PC, after about 5 minutes, I get this annoying notification (see picture) from my OS asking me to turn on the security center service; please, note that, on my PC, I am judge, jury and executioner, meaning I decide what stays on and off, at least I've always been so although now, with Windows 10, this has become somehow more difficult. So, yes, I have turned off the security center service because I don't need it and I don't want it! Furthermore.
Now. I've tried disabling every possible notification I could find under the notification menu and the security center one; I've Googled for a solution but I haven't found anything: apparently, everybody loves this service.
While I'm here, is it possible to obtain system privileges in Windows 10? I've tried the old trick with the cmd task but it doesn't work anymore: the cmd windows does open and with "system" as well but it's not interactive apparently.
View 9 Replies
Feb 23, 2016
driver_verifier_iomanager_violation BSOD loop on starup, it's even worse now. This time my BSOD came from having chrome open while rendering in Premiere. It would do this every time so I turned off chrome while rendering and I wouldn't get any. I never had any problems with games. I did notice Chrome would stutter with Facebook open but nothing else would cause issues. The last render I did rendered out. I then opened chrome and my computer froze. I tried to boot in and it froze after I loaded in to the desktop. I then set the BIOS to default settings and turned off AMD cool and quiet and AMD turbo. Now after the ASUS splash loading screen pops up, it goes to a black screen. Rebooting a million times and trying to repair did not work. The other monitor doesn't even get a signal. Leaving the computer off with no power for awhile did not work either which always fixed it before. checking the disks everything seemed fine. Safe mode blue screens everytime too within a minute if it even boots up to begin with.
View 9 Replies
Aug 1, 2015
How can I disable ,,turn on windows security center service'' warning? It shows up every time the system boots...
View 9 Replies
Dec 28, 2015
After recent Windows 10 Update, my wireless connection no longer works. I've done some troubleshooting and I have ruled out my ISP, cable modem, and router, leaving the issue to be something within the computer (Dell laptop - Inspiron 7537).The wired connection works fineWhen I run Windows Network Diagnosis, it tells me that the Windows Wireless Service is not running (see attached pdf report).
When I try to manually start the WLANSVC service, i get an error message that says "Windows could not start the WLAN AutoConfig service on Local Computer Error 193:0xc1" (see attached)When I try to manually start the WLANSVC service from the command prompt (as Admin) I get a slightly different message that says "The WLAN AutoConfig service is starting. The WLAN AutoConfig service could not be started. A system error has occurred. System error 193 has occurred. *** is not a valid Win32 application." (see attached)I've downloaded the latest Intell PROset Wireless drivers from Dell (V18.20.0.9) for the Wireless-N 7260 wireless network adapter and have uninstalled and reinstalled the drivers.
View 3 Replies
Aug 11, 2015
So far, things have been ok with my Windows 10 update. Today I tried to look for updates, as I think this is the regular Patch Tuesday. However, it takes a long time, then gives me the error in the title. Using the update fixer doesn't work, I just get the "Service Registry is Missing or Corrupt". What would be causing that?
I'm also getting a problem with task host not wanting to allow shutdown, what's the deal there?
View 14 Replies
Sep 18, 2015
I've run the free Windows 10 upgrade twice on my Windows 8.1 laptop. Both times, Windows 10 would download. As my system restarted the install would take place and system finishes restarting. However, upon hitting the splash screen, I was back to Windows 8.1. Not sure why the install is failing. Each time, I receive a failure in the Windows Update popup. Did not have this problem on my desktop going from Windows 7 to 10.
View 2 Replies
Oct 7, 2015
Since I changed to my new hard-drive I have had random issues with BSOD's trying to get into Windows.
The BSOD I get is: Kernel Security Check Failure
Usually, I just need to restart the computer, but now I can't get in at all.
I believe it has to do with some drivers, since the hardware has worked well in Win 8.1
Please see attached file : STORDATORN-2015-10-07_161609,83.zip
View 1 Replies
Sep 6, 2015
I have upgraded to windows 10 for a few weeks now and over the last couple of days it has stopped installing any windows updates, the error code that pops up is (error 0x80070643)
It's also stopping me from installing some other programs but not all.
I have tried restarting the computer, Nothing I've tried restarting wuauserv service, Nothing I've tried the troubleshooter for windows update, it says problems were found and they were fixed. I have also cleared the cache for update downloads from the following folder: C:WindowsSoftwareDistributionDownload
In the Windows update page it seems to take forever to install the updates and then throws out the following:
There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information:
Security Update for Microsoft ASP.NET MVC 4.0 (KB2993928) - Error 0x80070643
Security Update for Microsoft Silverlight (KB3080333) - Error 0x80070643
Security Update for SQL Server 2008 R2 Service Pack 2 (KB3045313) - Error 0x80070643
Update for Microsoft Visual Studio 2010 Tools for Office Runtime (KB3001652) - Error 0x80070643
Note: this is after clearing the cache in the above folder location.
View 6 Replies
Jan 14, 2016
For some unknown reason I am now receiving a black warning banner that pops in and out ever second or three appearing just above the clock telling me that the last USB device connected was not recognized by Windows. I should reconnect and try again or go on line a find a solution, or word to that effect.
This VERY frequent popping out banner and the associated sound drives me crazy and hide a very important part of the screen where other messages from the associated links appear.
I have opened Settings and turned off the Notification button and from the control panel under sounds removed the annoying sound......I did this after a test I tried by disconnecting all the USB cables including the mouse from the PC and then rebooting, but still the same results. I cannot identify to which USB the banner refers to.
My OS 10 is a Win 7upgrade and up until now, for the past 6 months this problem has not existed.
Just as a point in passing, this problem made it's self know just after a momentary power outage. My PC turned off but I have it set so that I have to manually reboot.
I have had power outages before without any problem. In one occasion I even had a lightening strike somewhere down the line as it blew the fuse-box breaker out necessitating a replacement purchase.
Just as a point, when I swap my Win OS 10 HD from the caddie and replace it with my Win 7 OS, there is no problem at all.
I have tried several Restores to different dates to no effect.
Now here is the bad part. I actually Ghosted this Win 10 HD back to the beginning of November last year when I know I never had this problem, and yet there it is.
View 5 Replies
Aug 22, 2015
I'm currently installing a computer for someone who basically uses it to pay bills and read emails. They connect to internet with an USB dongle that connects to 4G network. It is a non-metered subscription and I've changed that connection from the Windows Settings to non-metered connection. However, I've noticed two things:
1. Windows Update won't donwload updates before pressing the download button (says that I'm using metered connection and charges may apply).
2. When starting Outlook 2013, program starts in offline mode for the same reason - metered connection. Always have to press the connect button there to get started.
Is there anyway to get at least the Windows Update to download and install automatically using 4G connection? If not from the Windows settings, maybe using gpedit/regedit?
View 5 Replies
Aug 7, 2015
As of now I've came across 2 Windows games Modern Combat 5: Blackout and Age of Sparta which shows me this below error even though I'm connected to 3G or 4G,
" No Internet connection available. Please make sure your device is connected to the Internet. "
I'm getting this error in Windows 10 now. I used to get it in Windows 8.1 too.
View 1 Replies
Nov 5, 2015
I upgraded from windows 7 to 10-when finished there was a red cross through the wifi icon.Having read numerous forums,I established that there was no old VPN software;I updated the Broadcom 802.11b/g/n software and in network adapter properties,I unticked power management switching off the adapter;also,altered bandwidth to 20_40MHz.As soon as I clicked on that,the wifi switched on!It then works until the computer is switched off;when on again,same problem.If I go to network adapter properties,and disable and then re-enable the adapter,wifi comes on again.
View 7 Replies
Nov 26, 2015
Upgrading from win 8.1 Pro to win10. Seemed to be going well and then saw lost internet connection in systray. Troubleshooting came up with "windows sockets registry entries required for network connection are missing". I can connect to the internet but not to the LAN.
View 7 Replies
Nov 24, 2015
How to track services via eventlog name in cmd.so the main problem is I can't seem to find these services on services.msc ... I want to know how to track these services via cmd, how I don't want you guys to tell me what type of service is this i want too know how I can track this own my own?
View 9 Replies
Jan 13, 2016
I installed windows 10 and now my brother HL-L2380DW doesn't want to print. It keeps on saying "Print spooling service is not running"
View 2 Replies
Jan 1, 2016
This happens when I exited a game while running Chrome and playing a video at the same time.
WIN-A34APVB2KDV-Thu_12_31_2015_224356_07.zip.
View 7 Replies
Aug 23, 2015
I check and found this annoying code in the Event Viewer.The Event ID code is the same but with different explanation and usually come in group..This happened to me usually after restart....
1. Event ID 7031.... The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
2. Event ID 7031....The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
3. Event ID 7031....The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
All these are on the Error Level... not warning.
View 2 Replies