Windows Store Splash Screen Pops Up For Half A Second Then Disappears
Jan 24, 2016
The Windows store won't open and I'm not sure what to do when i click on it, the splash screen pops up for half a second then disappears as if I never opened it, however it used to work. I've tried running commands in the powershell, scanned my computer, cleared the cache, and when I used the store troubleshooter it said that I needed a microsoft account, although I had signed into my computer (and the store before).
View 1 Replies
Similar Messages:
Aug 1, 2015
When I open the app store, the splash screen comes up and then just disappears and nothing ever happens.
View 24 Replies
Aug 4, 2015
I installed Windows 10 on my Lenovo Thinkpad Tablet 8. Recently I can't launch Windows Store. It will show the splash screen and then quickly close.
View 2 Replies
Aug 6, 2015
After successfully installing Win 10 it ran without any issues for about 1 day then Edge refused to launch, the splash screen opens for about 10 seconds and then disappears. The only change made to Edge was to import bookmarks from IE. Unsure where to start looking for an answer.
View 13 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Jul 29, 2015
I am running Windows 10 Home 64-bit. I have an Intel HD Graphics card and a NVIDIA GeForce GT 735M. I have had an issue for a couple of months when viewing videos or footage from my built-in camera. Half of the screen appears fine, but the other half is filled with horizontal blurring bars. This happens with a lot of videos, but some appear okay. The attached image is an example from today on YouTube.
View 4 Replies
Feb 22, 2016
When i click on the Store, it opens, but crashes immediately after half a second. I watched various videos on YouTube looking for "the cure", but none of it worked (like PowerShell, than cmd where I typed "sfc scannow", etc.)
View 1 Replies
Aug 14, 2015
I have upgraded my laptop to win10 from win7. While I'm trying to download apps from store, they show downloading and finishes after downloading half of app size only. Facebook app downloaded only 14mb outta 54mb and working well. AOE castle siege downloading some and closes and app not opening. What should I do!
View 6 Replies
Dec 29, 2015
OK, I recently 'upgraded' my windows 7 to windows 10. It was working fine since Christmas, then today it just freezes on the windows 10 splash screen, which as I'm sure you can guess is incredibly annoying.
View 4 Replies
Sep 23, 2015
I have win 10 pro installed on my dell e6410. When I start my laptop I see very bright blank white splash screen for 2 seconds during the boot process. The sequence is as folows:
1- I press start button and it powers up
2- Windows 10 logo screen appears
3- Very bright white splash screen appears for 2 seconds(This is not normal as i don't see it on work computer which also have windows 10 pro )
4- Then Windows 10 login screen appears and then everything normal.
How to get rid of appearance of this very bright white splash screen which appears during boot process as it is very annoying when you work in dark environment.
View 9 Replies
Oct 25, 2015
How to get rid of little black computer screen that pops up very briefly every now and then...
View 1 Replies
Sep 28, 2015
I have a desktop that I ran the update on from windows 7 up to windows 10. When I go to shutdown on this system it appears to begin the shutdown process. However, after a few moments with black screens and appearing to have shut down, the PC near turns off and shows the BIOS splash screen and begins to start windows up again.
I have tried various troubleshooting options on the internet though only resulting in - a screen every time I "shut down" that tells me that there has been an error and that the computer must restart, even though I was shutting it down in the first place... It also tells me that there is an error named "apple.sys" possibly causing the problem. The computer then restarts fine every time after that point though the only possible way of me shutting the computer down is manually holding the shut down button on my pc case. Then once I power up after that my computer fails to give power to my keyboard and mouse, to which I must then reset the BIOS every single time and then restart. This is the only way I can turn my pc back on after every time I manually power down - resetting the BIOS to bring power to my accessories. I dont really want to keep doing this every single night and plus I figure it must be bad for my pc.
I am now wondering if a clean install is my only option, or if there is some other way of keeping windows 10… just having it work properly.
View 1 Replies
Dec 22, 2015
I just bought this new ASUS K550J laptop and came with Windows 8.1 with it but I wanted to install Windows 10, fresh install. I did the usual things needed for installation and it was ok but it takes too long to boot up. Here is a video of what am I speaking. It's UEFI and I think it's the Windows Boot Manager, how can I reset it?
Code:
Windows Boot Manager--------------------identifier {bootmgr}device
partition=DeviceHarddiskVolume2path
EFIMicrosoftBootbootmgfw.efidescription
Windows Boot Managerlocale
[Code] .....
View 3 Replies
Aug 12, 2015
Win 10 not working. Went to settings to revert to win 8. The settings screen will not pop up other than an instant flash.
Problems with 10- won't let me sign in to outlook (outlook wont respond). wont let me connect a monitor. typing delay. no settings screen. won't let me open downloads from internet. no email unless i sign in from chrome search engine.
How do i revert without a settings screen?
View 1 Replies
Dec 18, 2015
Make an APP start at boot no splash screen in systray, I don't mind editing my registry as i have done for many other reasons in the past...
View 4 Replies
Sep 22, 2015
Yesterday I got a notification that my windows 10 upgrade was ready on my MSI GT60-0NE laptop and decided to give it a try because I really disliked windows 8.1. Windows update went through downloading the files and preparing the computer for installation. It then did the usual, configuring updates on the blue screen, got to 100% and just shut down completely. I left it there for about 5 minutes and decided to try to power it back on. When turning the computer back on, it stayed on for about a minute and then cut itself back off.
After waiting a minute it turned back on, then back off again. It kept repeating this for about 5 minutes. During this phase I saw absolutely nothing on the screen, no MSI loading splash screen, no cursor, absolutely nothing at all. I couldn't enter the BIOS, couldn't run recovery or even get into safe mode. Absolutely nothing worked. The battery light was also flashing blue which I had never seen before. During this time the hard drive light was flashing and flickering the usual red light.
I did a hard reset on the computer and then turned it back on. When i powered it back on the screen was still completely blank, no MSI splash screen, no cursors, couldn't enter the BIOS or anything. During this time the hard drive light was a steady red. The blue battery light was no longer there and it was back to its usual constant red light. After about 10 minutes the computer turned itself off. Being frustrated I left it overnight and tried again this morning.
When I power the computer on now, there is no hard drive light. It doesn't even give a single flash of red. The computer will stay on but just stays there at the black screen. I've tried to look for solutions but I can't get anything to work. The only thing I can hear running is the fan.
I've tried to remove the hard drive and boot to see if I could get into bios, still a black screen.
I've tried removing the video card and booting to see if I could get anything through integrated graphics, still a black screen.
I've tried to plug the computer into another monitor, still a black screen but it does recognize the signal.
Specs for the GT60-0NE 403-US:
Intel Core i7 3630QM (2.40 GHz)
Nvidia GTX 680M (4GB)
Windows 8.1 64-bit (Windows 10 now?)
View 1 Replies
Jan 12, 2016
Just checking all my apps today as I have just done a backup and found windows store not working. I have tried wsreset in an elevated command prompt but no difference.
Windows store just comes up with a black screen then this, any fix (see screenshot).
View 2 Replies
Oct 14, 2015
Upon start up of my PC it loads up then the screen goes blank, like its in sleep mode, no mouse nothing, if I turn the monitor on and off, the screen appears for a second or two then disappears again.
I tried restarting in safe to check drivers but it does exactly the same thing here. In safe mode however, under monitors Generic PNP Monitor has the Yellow Exclamation mark indicating an issue. I have tried uninstalling this and also my graphics drivers and it seemed to work for the first time. Next day I turned on my PC again and the same thing is happening. I have to constantly turn on and off my monitor so I can navigate to the relevant areas to uninstall drivers etc.
I have tried a Google search but everything I have read has said something about having a mouse pointer on a blank screen but I do not even have that.
My graphics are built in, not a separate card which the driver for this is labelled Intel HD(R) Graphics. Unfortunately I do not have access to another monitor to check to see if the monitor is faulty. Just to add, this just started randomly before a fresh Windows 10 install.
View 4 Replies
Jul 30, 2015
My computer went to a black screen again after installation, but after waiting for a while my computer fell asleep and I went to wake it up and the black screen was gone. I still get the black screen after I restart, but I just press the power button on my laptop, put it to sleep and then I press some button (any) and it's fine.
View 9 Replies
Feb 23, 2016
I recently upgraded to Windows 10 from Windows 7. Since the upgrade I have noticed the following:
When my computer comes alive from screen saver mode, sometimes though not always all the icons are missing. The task bar is there but clicking on any item there does nothing. It's like everything just seizes up.
View 2 Replies
Dec 10, 2015
W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.
Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight).
I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped)....
View 3 Replies
Jan 5, 2016
I recently upgraded to an SSD, I don't know if this is related.
While my PC was idle, it shut down for some reason (probably updates). I came back to an "Updating Windows" screen -- the exact screen used when installing, that big circle icon with a percentage. I have never had a computer boot to that on its own, but I assumed it was some important update. I let it do its thing.
Later, I came back to it doing this strange boot loop:
Motherboard splash screen
Normal W10 loading icon
Screen flash
A second, slightly larger loading icon
The "Updating WIndows" screen. Starts at 0%, raises to 75% a split second later, then disappears and turns off. This happens in about 1/5th of a second.
I booted into a startup repair disk, and ran startup repair. It said it couldn't fix issues. Next, I ran a chkdsk, there were issues it fixed but the boot loop is still in place.
Since I just installed an SSD last week, I still have my previous disk with the operating system still functioning. I booted it up, turned off automatic updates, and checked to see what may have caused this on my current disk. There were 2 updates available: A flash player update for IE, and Windows 10 version 1511 10586. I assume it is the latter, but how it installed, since I DID NOT AUTHORIZE THE INSTALL. Automatic updates are enabled, but I would have thought it'd install in November, when it was released (not 2 months later!)
I don't dare install it on my backup, in case I have to re-clone the SSD.
View 1 Replies
Aug 29, 2015
I have Windows on my hard drive and Linux Mint on a USB flash. Normal booting goes straight to Windows with no BIOS popup, because I have grub saved on the USB drive. to load Linux: with Win7 on the HD, on my HP, I hold ESC down until the boot menu pops up, choose the USB, then choose Linux on the grub popup. To reload Win7, all I have to is reboot and it goes straight there.
With Win10 on the HD, I can boot Linux as described. But when I reboot, the Win10 splash comes up but the loading twirly never appears, so Win10 never boots. The only way to get it back is to restore a backup I keep handy.That alone is enough to keep me from switching to 10 permanently, unless one of you knows a trick. And by the way, it's a ten year old HP with BIOS and no UEFI.
View 2 Replies
Feb 3, 2016
Roughly every hour I get a Cmd window popup that lasts a couple tenths of a second. Some text appears line after line in the window and, as I said, it vanishes. I checked the event log right after the last one and found a appropriately time stamped event in the Security log. Here is the data from the log.
A security-enabled local group membership was enumerated.
View 5 Replies
Mar 27, 2015
yesterday I downloaded the 10041 ISO from the Windows 10 Technical Preview ISO March Update - Microsoft Windows.I installed by mounting the ISO into a VirtualBox and enjoyed having a look around. In fact I like it so much at my initial impression I decided to move into a dual boot system.
I have a 250gb SSD as my C: drive so I partitioned it and created a D: of 80GB for the Windows 10 preview.I then tried creating 2 different USB installers... one Rufus MBR for legacy BIOS... and the second using the microsoft USB/DVD installer tool. I also burnt a DVD. In all cases I used the very same ISO that I mounted sucessfully inside the VirtualBox yesterday.Each one of the 3 installers I created seemingly hangs at the initial black splash screen with the 4 blue windows in the centre. It goes no further and believe me I waited 20 minutes on one of them.
BTW.... I tried opening the ISO in WINISO and then mounting to BD ROM drive. Then selected the setup.exe and away it goes just like setting up on the VBox ... but then it get to a screen which suggests I need to install a different language pack to the one already installed, so I immediately realised this route is trying to upgrade my Win 7 which I don't want... so I aborted.
View 9 Replies
May 30, 2015
i selected the optoin Auto hide but when ever i am on a maximized program like chrome for example my taskbar does not pop up i have to minimize the program to get it to pop up and that gets anoying is there a way to make it pop up when ever i move my mouse down to it.
View 7 Replies