I know there are tons of messages about how to install or force install W10 but I have a different error and none of the solutions seem to work.
I'm getting error 80244019 in WindowsUupdate every time I try to look for updates. I've tried since yesterday the force command line but it does nothing. I've tried also fixing Windows Update with WUdiagnostic. It "solves" 3 or 4 errors everytime I run it but it doesn't change the 80244019 error.
How do I solve 80244019 error?
I have also tried the MediaCreationTool way but when it's going to start the installation it says that I'm trying to install a different language, not the one that uses my OS so it won't let me upgrade The only way is wiping my files and apps and I don't want that. How do I change the language of the MediaCreationTool?
I chose to upgrade my PC through the mediaCreationTool and waited for the download to finish.A few minutes later it was checking for updates. Then bam.
My PC suddenly restarted. What I want to know basically is where the mediaCreationTool saves the iso as it has already finished downloading, and if I can use that iso without mediaCreationTool's?
I am running Windows 7 64 Ultimate and I am trying to run the MediaCreationTool64 from Microsoft. When I run it, I get message shown below.
At least it's nice to see Windows 10 is carrying on the long-standing Windows tradition of supplying useful and actionable information in their error messages.
Well only 'View installed updates' works. (the earliest shows only one of 21 November - I thought November had a big update. no?)Clicking these does nothing:-
On Window 8.1. Boosted the install which a lot of people are doing by clearing SoftwareDistribution/Download and running the cmd prompt.
Downloaded the Windows 10 update, as soon as the Preparing to Install dialogue was done, the computer restart, trying to install a normal Windows 8.1 update instead.
Once I am booted up again, I get this error [URL] .... and try the fix.
Once I try and redownload the update again, it skips to 100%, then fails the update with the error 80070643 being reported.
I am not able to update my windows 10 its showing following error-There were some problems installing updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information.
I did my windows 10 update recently land since then my down arrow key isnt working. This applies for both the down arrow key and the down arrow function on the numeric key pad. How to rectify this issue?
Can't type anything in the "search the web and windows" bar at the bottom. Also used to be able to click on start and type the name of the application to run it Windows would find it - this is not working either. Nothing happens when you type.
I have a 5.1 surround sound speaker system connected to my computer, which has always worked fine when running windows 7, however as soon as I upgraded, windows 10 will not play any sound through them.
- The volume is turned up on the system as well as the speakers - Not on mute - Have tried reinstalling the drivers
I can't think what else it would be. When I open up the playback device menu, it says that sound should be playing through the speakers, however I get nothing.
What baffles me is when I open realtek HD Audio manager to test all of the speakers, I can make them play a sample sound through that, however no other applications will play sound.
I updated my windows 7 home edition few months back however, when i wanted to connect my laptop with my smart tv through an hdmi cable , no display was detected. I tried high end hdmi cables but i am unable to connect my HP envy laptop with the tv. Besides i have not installed november update to my laptop.
I updated today from Windows 7 to 10, and everything seems to be working great except for a screensaver I purchased a few years ago. I know it's a relatively minor problem, but it worked fine on 7.
The screensaver worked by taking a screenshot when initialized, and displayed various effects over that image.
Now when I attempt to run the screensaver I get the following error:
I'm not running any other programs whatsoever, so I wonder if a core Windows process is now interfering with this?
For those of you who can't get the Windows Start menu in build 10074 to appear or work when you UPDATE from build 10061 it WILL work if you revert back first to build 10049 and then update.
Activate windows and re-boot -- now it will work. Ensure Windows is activated after the re-boot but activate BEFORE reboot.
(Another good reason for keeping loads of backup images).
You can also now hide system icons again as before too. Don't forget to clean up disk space by using Disk cleanup in properties in file manager -- you can get rid of Windows.old if you don't want to revert back again --in any case I think it's better to RESTORE a previous version from a backup image if you must restore windows.
Updated my computer from windows 7 a day ago to windows 10 and ever since I have not been able to get any internet. I have tried updating all of my drivers by using a USB stick but it made no difference and when I troubleshoot the problem it says "there might be a problem with the driver for the Ethernet adapter"
I had upgraded to Windows 10 before and had the same problem, but i downloaded the drivers for my motherboard and it fixed the problem, but later after that my windows didn't activate and windows support told me to take it back to Windows 7. I then had to uninstall my Ethernet drivers and reinstall the drivers and that fixed it but then I upgraded back to windows 10 and here ...
I have a Logitech wireless keyboard that uses a USB device. After a update on the 10 of March my keyboard stopped working. I have tried another wireless USB keyboard Mircosoft and a a wired Microsoft keyboard without success.
I have followed a few of the suggested fixes after doing a search without success.
I've recently downloaded Microsoft's Windows 10 update and ever since i'm having issues with my computer. First, I'm pretty sure the update made my computer crash because 2 days after the update, my OS completely shut down and i lost everything on my drives. I then reformatted it and installed back windows 8.1. However, I can't connect to internet since the crash, even though im connected via Ethernet. It says IPv6 has no internet connection and IPv4 just started to have the same problem. I tried to reset winsock entrie and tcp/ip stacks, but in vain. I also tried set google's open dns address, but no success there either.
MS Edge (used rarely!!) has stopped working since the November update has been installed. Oddly it works if I point it directly to a proxy (we use a bluecoat appliance at work) but if I don't, the packets don't even hit our site FWs. If I stop the windows FW service then it works perfectly and the packets(requests) are sent directly to our site FWs as expected and I can see it all on the FW tracker.IE and chrome are not effected and work fine either way.
We're not deploying windows 10 right now so it's not causing a major problem, what could be the issue. Obviously leaving the windows FW service stopped and disabled is not favourable for when clients are not on the LAN.
I recently changed my microsoft password.After a reset, after entering the PIN, i was greeted with the message: " username or password is incorrect".I changed it to log on with my new password and it worked perfectly.
If i enter a different PIN: " the PIN is incorrect"
It is worth mentioning that i changed my PIN several times but with no result.
This morning when I logged on my Surface Pro (1), my Micosoft Wedge mouse quit working after it finished installing a Win 10 update. The mouse shows up in Device Mgr/Bluetooth, and it says it is working properly, but it isn't. I've tried reinstalling the driver, and checking bluetooth settings but cannot find what the problem is.
After installing Windows 10, my integrated Dell webcam video is not working. After exhausting every option possible, bottom line is that Dell is not supporting my laptop model in Windows 10. There is no Windows 10 webcam driver available other than the one that Windows 10 installs automatically. It does not open my Dell webcam video. Any way other than installing a USB webcam?
My problem is, that one beautiful day my Lenovo notebook with latest Insider Windows 10 (11102) stop working LAN (yellow triangle) and Wifi (after few minutes of connection gives triangle too). In case of Wifi, I can simply turn it off and on again and it works for few next minutes, but LAN stopped working completely. It says, that in this computer isnt any internet protocol, but in setting both (IPv4&6) are ticked. Lenovo sent me to heaven, because drivers are already included in Win 10, so I cant reinstall it. Uninstall of drivers for LAN and Wifi and automatic new install doesn't work for me.
EDIT: I already tried this, but there isnt any word about driver updates of my LAN and WIFI.
My Targus amu73ap mouse that was workinG perfectly with 8.1 is not working on either my PC or Asus T100 hybrid after the update to windows 10. I keep getting a message saying that the usb device malfunctioned.
