Windows Apps Not Opening After Roll Back To Previous Build
Dec 21, 2015
After experiencing difficulties with the last windows update I decided to roll back to previous working build (10240). Now some of Windows 10's apps are not functioning. If I open e.g. Calculator, Photos or Store, the app's window will flash on the screen for a second or two before closing.
The effected apps also take a different appearance in the Apps & Features section of the settings with the "move" and "uninstall" buttons greyed out and the names being less user friendly, I've attached a screenshot below. Is there are way to get them restored?
View 2 Replies
Similar Messages:
Jan 29, 2016
So, recently (after the November build release) I woke the next morning to find that my computer underwent a rather major update. After which, it seemed, my home network was thrown out of wack. I immediately rolled/reverted/recovered to previous build. But now everything is out of wack. Most of the time I have to restart my computer just so it'll communicate with my printer to start printing.
And restarting the computer is twice as long if it restarts at all. Most of the time It gets stuck in the "restart" progress animates (the rotating circles) and I have to press the restart button on the computer tower, with great regret and dread. Transferring files from one windows 10 device to another is a 50/50 hit or miss. I'm not literate when it comes to networking and was super happy how everything was.
But now, not only is my wifi home network out of wack, but my computer itself is wonky. I figure I might as well reinstall the newest build in hopes that it'll at least fix a fe of the problems. But anytime I check for updates, the newest build no longer shows up.
View 1 Replies
Aug 4, 2015
I'm trying to roll back to the OEM Win 7 on this machine. On the setting page "Updates & security" the options under "recovery" did NOT include rolling back to Win 7. The only choice was to roll back to the previous build. I thought perhaps I would have to work my way back to 7 build, by build. I started out with 10041, then 10130, then 10240. I clicked the "Back to previous build, hoping. Well, it went back to 10130 no problem. However, that is it. Going the Setting, Updates& Security route within this roll back of 10130 there is no way to keep going back to finally get back to Win 7.
View 4 Replies
Sep 17, 2015
I am sick and tired of this new win 10 pos operating system, can I roll back to something that works...like win 7?
View 5 Replies
Sep 26, 2015
I upgraded from windows 8.1 to windows 10. after a month, my system crashed due to inaccessible_boot_device issue. I tried everything, but had to go for a fresh install of windows 10. then came the issue of activation. No matter what i did, it wasnt getting activated. So, now the customer care at HP has asked me to install Windows 8.1 again. and then upgrade.
My question is, should I install Windows 8.1 Single Language itself, as it was my original OS, or can I go for Windows 8.1 Pro. Will Pro dvd have the option of Single Language in it? Media creation tool is not working for me, that is why I'm trying to download Pro via torrent and then install Single Language.
View 1 Replies
Jan 17, 2016
After some software problems, The fix was to Refresh my PC, despite me selecting "Keep my files" it removed loads of my software including ones I cannot get without a disc,
Is there a way I can roll back to before I did this, since I still have the Windows.old file with all my things in, Do I just Copy and replace my files with the things from Windows.old to the new one or is there a way to roll back completely?
installing all my stuff again is not worth for a temporary fix.
View 1 Replies
Jun 19, 2015
How can I rollback to Windows Phone 8.1 from Windows 10 Mobile using my Mac? Is there any possibility?
View 1 Replies
Aug 17, 2015
I have been running Windows 10 Pro on my HP desktop for overa week with no problems. Over theweekend Windows attempted installing an upgrade; not sure when, but during theupgrade process I received a Critical Process Died BSOD with no error code. All system restarts result in the same error, and I havebeen unable to use Repair, Recovery Mode, or Safe mode to isolate theproblem.
The only usable option seems tobe to do a System Restore where I have the choice of losing all installed apps,or losing both all installed apps and files. Is there any way to roll back to the Windows 8.1 that isstill located in the Windows.old folder from the command prompt?
View 6 Replies
Jul 22, 2015
Will I be able to roll back to Windows 7 from Windows 10, using Windows Recovery Disc which I made as a Backup for my Hp Pavillion. I know this question may sound silly, but has a point in case Windows 10 doesn't have certain features which I m using on my PC currently e.g Remote desktop.
View 1 Replies
Aug 11, 2015
We’re sorry, but you can’t go back. The files we need to take you back were removed,(But the files are there),what next?
View 1 Replies
Jun 15, 2015
I installed the technical preview on my Surface Pro (gen 1), It's great and all. Gets smoother with each update, however, I'd like to revert back to 8.1 pro so I can reserve my copy of Windows 10.
I don't exactly know if the tech preview will auto-update to the full OS when Win10 releases July29 and I've tried to search for an answer to that question and the answers I find refer to Microsoft releasing "ISOs" when the full OS comes out and I don't know how to do those things so that's why I want to revert back and reserve.
This is my first time trying out OS preview builds. I made a USB recovery drive before I installed it though. I tried using it to refresh my SurfacePro back to windows 8.1 using my USB recovery drive, but the only option I get when it comes to choosing a target operating system to refresh is just windows 10.
View 2 Replies
Jan 17, 2016
I have received the free update from Windows 7 to Windows 10.My issues originally started when the start menu with the apps on disappeared I researched the internet and managed to fix this by using Powershell and copying and pasting in some instrucitons
My computer has recently done an update and I am on build 10240 and now my apps do not work at all. I wish I could go back to WIndows 7 but am over the month where it allows you to which is very annoying as Windows 10 seems very unstable.how I am to get my apps working again I have researched the internet and tried some fixes (including Powershell again) but to no avail The apps do not work - not in the start menu or in the all apps section.
View 5 Replies
Jul 19, 2015
I did a system restore and I lost activation (Im on build 10130). Is there any way to roll back to 8.1 and wait for official update? I can't update to newer builds either, WU shows no new updates.
View 8 Replies
Aug 22, 2015
So, i absolutely hate windows 10 and MS for making it, so i am more than happy to go back to Windows 8.1. Only problem is, that i cannot.
Roll back option in recovery is gone and i haven't gone for 30 days. So, naturally i went for my trusty old 8.1 ISO that i made, only thing here now is that doesn't work either. I get this: "setup has failed to determine supported install choices" ... So..... What can i do?
View 16 Replies
Oct 22, 2015
I switched to Windows 10 a few weeks ago and have been trying to find a solution to a problem with the Windows Photo Viewer.
If I open a folder full of my photos, I am unable to advance to the next or previous pictures using the arrow keys on either side of the 'Play slide show' button, or the directional keys on my keyboard (as I was previously able to do in Windows 8). Windows Photo Viewer is set to be my default viewer for all extensions as well.
View 4 Replies
Dec 20, 2015
When I installed windows 10, something went wrong and I could no longer could connect to the internet because some protocols were missing. Also, within five minutes of starting using my computer, the start menu stopped working. I have tried all the fixes I could find for the start menu including sfc /scannow and multiple powershell fixes. None of them worked. When I use the windows 8.1 install disk it, I get a message saying that something happened, setup has failed to determine supported install choices. Windows 10 is difficult to navigate and always seems to be missing some software.
View 2 Replies
Dec 23, 2015
A few days ago my Pc started to act slow and slugging so i restarted it a couple of times and on the 3rd reboot it started a disc check. Once it finished it worked flawlessly BUT it had reverted to a previously unknown restore point. Ok i thought and reinstalled some programs that were missing and went to bed. Next day i booted it up and all the programs were missing again.....The same unknown restore point was back! Curious now, i installed a program, rebooted the pc, and once again, same restore point! Just what is happening?
View 4 Replies
Aug 31, 2015
Three weeks after upgrading from Windows 7 to 10 from Microsoft a message saying "Windows 10 Home Build 10240" appeared in the right-hand corner of my desktop last night. As I like to have a completely clear desktop. no icons etc. this is a nuisance.
View 3 Replies
Aug 2, 2015
Just did the Windows 10 upgrade. It's buggy to say the least. I'm having an issue where my XBOX, WEATHER, STORE, MAIL, CALENDAR, and FEEDBACK apps open up by themselves like every 10 minutes. They all open at the same time. They don't pop up on screen but appear on my second monitor's task bar minimized.
View 3 Replies
Aug 9, 2015
For the last few days, I have been unable to get the Windows App Store, or any apps downloaded from the windows app store, to be able to open. It opens the initial window and then just closes and nothing occurs. This also occurs with the xbox app...
View 3 Replies
Aug 7, 2015
I have recently upgraded from 8.1 to windows 10 after it finish installing I reset my computer(Via the recovery tab). I then started installing my programs and everything was going well, but when I logged in the next day I couldn't open Task Manager or the admin command prompt(the normal one works fine), my windows update also takes forever to search for an update and nothing ever happens. It seems to be something wrong with the programs that require admin(I am the only user on the computer so I have administrator functions). I have some error messages but there are a few more. Here are a few: 'This program did not respond in a timely fashion', 'The service cannot accept control messages at this time' and I will attach a screenshot of the longest one.
View 2 Replies
Aug 23, 2015
Windows Application not Opening after upgrading to Windows 10. Other Applications work but this Application is no longer working after I made an upgrade from Windows 7 to Windows 10. I have tried clean Windows 10 install but the problem is still there. VMPP for Maya is the name of the Application. From event viewer, it looks like it is crashing before it even opens.
The error information I see is:
Application: VMPPmaya.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.InvalidProgramException
Stack:
at VMPPmaya.App.Main()
This App worked on Windows 7 but NOT on Windows 10.
View 2 Replies
Sep 10, 2015
Since the last update, windows store all of the sudden won't restart. how to make it work again?
View 5 Replies
Aug 11, 2015
I am having an issue that I cannot resolve. Before I am done using the computer for the night (or simply going out), I close all open applications, and leave my account signed on. Anyways, when I come back, I find that Windows Store or other apps, like Photos, opened automatically.
View 1 Replies
Oct 1, 2015
Recently I had to clone my HDD cause it was dying. After that I had a problem with start menu, notifications, search bar not working anymore, but I've managed to repair that. (here's the topic : Start menu, search, notifications not working; Dism not working (error 0x800f081f); etc ...)
Only problem left is Windows Store not working anymore (it autoclose itself as soon I launch it). Mail & Calendar apps show as @{microsoft.windowscommunicationsapps.blablabla}
When I use WSReset.exe, I have an error message saying "ms-windows-store:PurgeCaches, app cannot be opened" or something like that.
I have tried to register Windows Apps again with Powershell command. sfc /scannow dont find any problems. Dism /restorehealth don't change anything.
When I create a new account, It doesnt work either, it is just a bit different as it show me a pop up saying that it was not able to open windows store and that i should ask my admin.
I've tried to upgrade 10 to 10, but the install stucked @ 71% ...
I CAN'T refresh the computer, as I have applications projects with too much dependencies and it will be too much to reinstall everything. Everything else is working OK, and windows store is less important than the rest, but if I can repair it, it's great.
Oh, and I forgot to say that when I disconnect from my account, I have a LoginUI.exe error maybe it's related to that, i don't know, so I tell u about it too.
View 9 Replies
Aug 1, 2015
1)open cmd as admin
2)Go to C:Users<Insert Username>AppDataLocalPackages and search name of your broken app (I will search Photos app)
3)Look at folder's name (Microsoft.Windows.Photos)
4)Now you know your app's id. Let's go back to cmd
5)Use this code
PowerShell -ExecutionPolicy Unrestricted -Command "& {$manifest = (Get-AppxPackage Microsoft.WRITE APP'S ID HERE).InstallLocation + 'AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}"
It will be like this
PowerShell -ExecutionPolicy Unrestricted -Command "& {$manifest = (Get-AppxPackage Microsoft.Windows.Photos).InstallLocation + 'AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}"
6)Press Enter and wait till the command finishes its work.
7)You don't have to reboot. Open your broken app and it will work now
View 24 Replies
