I recently upgraded to windows 10 from 7 and at first my windows had gotten corrupted so I reinstalled my PC and everything was fine until it blue screened then after that it has randomly crashed my PC without a blue screen ....
View 1 RepliesOn three occasions, my laptop has crashed displaying the blue screen. If I recall correctly, the blue screens occured while I was either browsing the web or reading a PDF..
View 3 RepliesI ahve a desktop running windows 10. This last week I've been running into shutdowns that never stop. The blue screen that says "windows is shutting down" never goes away. In the end I'm forced to hold the power button to kill my pc (which I hate).
PC Specs:
Windows 10 Home
i5-3570K
8 GB RAM
Essentially, ever since I upgraded, my computer (which has had its issues in the past, admittedly) has been crashing repeatedly, multiple times per day, exact amount varying with what I'm doing. The most common error according to WhoCrashed is Video_TDR_ERROR, followed by DPC_WATCHDOG_VIOLATION, and HAL_INITIALIZATION_FAILED.
I've noticed it crashes more often when playing a flash video or similar streaming, followed by media players, and then even sometimes when just browsing the web. The majority of the time, it will freeze first, repeating a sound loop varying from a split second to a full second or so until it finally bluescreens.
I've taken the following steps so far to try fixing it, after some google searching:
*Rolling back Nvidia drivers to .30
*Completely removing the nvidia drivers with the uninstaller utility, and then reinstalling them again
*Reinstalling sound drivers and wifi drivers.
*SFC checks, and DISM even when nothing was found
*Hard drive repair (Check disk and seatools)
*Virus scans
But no luck so far. I'm assuming it's driver/software related based on what I know of the errors and the timing of it all.
As a side note, I can't change back to 7 right now, it's a long story that basically comes down to the files getting deleted when they shouldn't have been. I'd also prefer to avoid Restoring, as that removes all programs (Effectively, I don't have any from the Store), which defeats the purpose of upgrading instead of doing a clean install, unless someone knows of a 'repair' installation option like Windows 7 had, that keeps ALL programs installed, but I can't find anything like that.
Attached the generated archive.
My computer is crashing constantly, and its gotten to a point where its just very hard to use. It sometimes crashes 3 or 4 times a day, with crashes including blue screens, random restarts, complete power offs, and a combination of blue screen and mid blue screen it turns off. I've manually removed software, used malware scanners, cleared data, but nothing so far has worked.
My computer is the CyberPower GUA880, with the single modification of an NVIDIA GeForce GTX 750 Ti graphics card.
My most common BSOD is CLOCK_WATCHDOG_TIMEOUT
I upgraded from Windows 8 to 10 without a hitch an hour ago and kept all of my personal files and apps. I set up my start menu and everything was working fine, but I wanted to change the image on the logon screen (or whatever you call the screen in between the lock screen and the screen where you enter your PIN/info). So I took a risk and downloaded the 3rd party app here:
[URL] and uploaded an image and hit apply. Of course right after doing that I went to lock my PC to see if it worked, and as you can tell... it didn't.
I've tried rebooting and it hasn't worked. It's just very rapidly flashing between a blue screen w/ a loading circle and my lock screen image.
just recently i installed windows 10 (clean install) on my built desktop. At first it was fine installing programs etc. Then not sure what i installed last or what happened during an installation but now when i try to install a program like Nivida Graphics Card Driver the blue screen error comes up. It never fails, even if i try and install skype it also causes the problem. I originally had the Nvidia G experience installed but i read online that this might be causing the problem so i uninstalled successfully but it is still happening.
View 1 RepliesAfter installing Windows 10 - on the first login screen, when I enter my password pc is freezing up, after a few seconds it fades to black and then restarts. Cannot get past this part. The PC I'm upgrading is a Dell Inspiron laptop upgrading from Win7.
View 6 RepliesI installed windows 10 I had already 5 blue screen with errors saying KERNEL-SECURITY-CHECK-FAILURE. find the source of the problem..
View 1 Repliesive been constantly experiencing bsod crashes. Ive attached the DM log collector file
MSI-2015-12-29_204642,07.zip
my Windows 10 has been freezing randomly with no blue screen and no event log. I haven't found any discernible pattern in the crashes, whether I am gaming, drawing, or browsing the web, and I have tried updating drivers.
For some reason it isn't allowing me to activate Windows, could this be part of the issue?
I had a computer man in to install Windows 10 and remove Windows 7 and I wish I had never done it. I can be writing away and then all of a sudden it freezes and comes up with a couple of pop ups before waking up again. Occasionally the computer freezes solid and I have to manually switch it off. I have the computer man coming again tomorrow which will cost me more money but I'm getting close to just giving up and buying an Apple.
View 19 RepliesI upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it. Then I was using my laptop then flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired .. Due to critical system driver missing or corrupted (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse.
I've searched for the last day forums and most people seem to have boot/bcd errors and so don't work for this problem. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable.
My computer has always been fine, until one day i was getting pop ups and redirected randomly, i notice a strange file called "techsmart computer" and was trying to delete it but couldn't so i wanted to go into safe mode and forcibly remove it, i open the start up menu simply check safe mode only and restarted, ever since all i see is the black screen with it loading with nothing else no repair, error message just it loading then it goes to the login screen the blue one and for some strange reason it is flickering as it its turning on/off and its a never ending load! if i press the power button its shutting down and it stops flickering, i searched online for solutions and nothing relevant and of the possible solutions i cant do because i can never get into the login screen, this is not a instillation issue or driver or graphics card, etc... started ever since i checked the safe mode, i want to mention i'm writing this using a different computer, also don't know if its a 32 or 64 bit.
View 1 RepliesI put window 10 on my dell XPS-420 I sign in it goes to my home page and the screen keep on flashing i can not do anything the arrow that the mouse move there's a blue circle that keeps on going and when it stop the screen stop flashing too it last 10sec then it start to flashing again with the blue circle keep turning like it up date something well it 2 days and the same thing the pc on for 2 days too ...
View 4 RepliesAlthough normally random, the freeze (to which this dump file is related) happened whilst listening to music in firefox, using teamspeak 3 and playing guild wars 2, after 2 hours with no issues.I have run memtest86 in multiple memory configs, only to receive under 10 errors in test 13 which I understand is OK.The errors are systematic for my type of memory (all sticks show similar errors in test 13 regardless of memory slot).
My Specs:
Windows 10 pro
CPU: 6700k (not OC)
GPU: Fury Strix
RAM: 32GB (4x8) Crucial ballistix sport DDR4 2400mhz
Mobo: Maximus ranger viii
PSU: Corsair HX1000i
OS HD: Samsung 850 Evo
HD: 3tb WD green
So I'm on Windows 10 Pro, and a while back before I reset Windows and am where I am now, anything Minecraft related would crash as soon as it finished loading. So I'd open up a modpack or just plain Minecraft and as soon as it got to the title screen, boom, blue screen (Page fault in non paged area) so I looked everywhere for answers but none of them worked. Ultimately I just reset my PC (while keeping files if it makes a difference). So after installing my programs again Minecraft was no longer an issue, it worked as expected. Fast forward to today.
I open up Nvidia Geforce Experience to use Shadowplay, I click on Shadowplay, flip the on switch, and when I click the "Allow Desktop Capture" button, Bam same exact blue screen as before. I have tested both my RAM and SSD (windows memtest and Samsung magician's test for my 850 Evo) I don't know what is causing it anymore, I could test and see if the bluescreen occurs while on my integrated graphics or something. (Not sure if Geforce Experience would even open without my card though.
System Specs:
CPU: 4790K
GPU: Msi GTX 970 4G
PSU: Evga 650 watt supernova
RAM: Corsair Vengeance Pro 1866Mhz
SSD: 250GB Samsung 850 Evo
Since the last update, windows store all of the sudden won't restart. how to make it work again?
View 5 RepliesI'm having an intermittent occurrence of Microsoft Windows Error Reporting application popping up after loading Windows 10, with a message that says "Windows Data Protect has stopped working."
This message hangs for a minute or two, then goes away. I cannot tell if the problem is being fixed automatically, or if it is just going away.
What is Windows Data Protect, and why does it keep crashing?
1)open cmd as admin
2)Go to C:Users<Insert Username>AppDataLocalPackages and search name of your broken app (I will search Photos app)
3)Look at folder's name (Microsoft.Windows.Photos)
4)Now you know your app's id. Let's go back to cmd
5)Use this code
PowerShell -ExecutionPolicy Unrestricted -Command "& {$manifest = (Get-AppxPackage Microsoft.WRITE APP'S ID HERE).InstallLocation + 'AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}"
It will be like this
PowerShell -ExecutionPolicy Unrestricted -Command "& {$manifest = (Get-AppxPackage Microsoft.Windows.Photos).InstallLocation + 'AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}"
6)Press Enter and wait till the command finishes its work.
7)You don't have to reboot. Open your broken app and it will work now
I have been using Win10 since July. It has been working fine. Just recently I noticed a blue screen at boot up stating, "resume from hibernation". I have never used hibernation in my life. Sleep mode, yes. Hibernation, no. But I have an SSD and don't use sleep anymore. I do a full shutdown every time. I noticed the same issue on my Dad's Win10 computer.
The reason I am asking is I want to boot from a USB flash drive, but "resume from hibernation" will not allow that.
My original os is win7 then I upgraded to 10... After a while of using it... It opens the Blue screen saying unmountable boot volume..
Next i rebooted it, it says "preparing automatic repair" i tried to wait.. But after it says that, it goes to a black screen and nothing happens
Then i tried dloading the iso from the site and then burned it to a usb.. Then it says
Press any key to boot from USB
*presses any key*
BOOTMGR is missing
Press ctrl+alt+delete to restart
I only have recovery disks on win7
My laptop is Vaio SVE111A11W
I'm trying to download the debug tool. My boss's computer started developing blue screens. He also notices that the service host keeps increasing in memory and then gets the low memory error before it crashes. I had this actually happen to my machine but I thought it was related to iTunes. I had to re-format my laptop in order to fix it.
I tried to upload the mini-dump file but was getting invalid file. I have uploaded it to wikisend....
I've been using Windows 10 for few weeks now and it's been really good.
8GB Ram
1 TB Hard Disc
Asus Motherboard
i5 processor
Used the PC as I would normally do and shut it down last night. Recently installed the latest update for Win 10 as I recall. Otherwise no new changes or installation to the system.
So now when I switched it on its showing Automatic Startup Repair and it diagnose the PC but fails every time and shows a blue screen of startup repair where I can:-
- reset PC (reinstall but this fails at 36%)
- system restore or image restore ( but can't use either)
- startup repair (doesn't work either)
- command prompt (tried sfc/scannow and they won't allow me to do so unless I restart but keeps getting same error.
Tried unplugging the hard disc etc but same old loop again.
A few days ago I started getting random blue screens and why everything is hooked up correctly and all the components work so my issue here are my PC Specs:
Operating System
Windows 10 Home 64-bit
CPU
AMD Athlon II X2 235
Regor 45nm Technology
[Code] ......
I am having this BSOD whenever i skip a video a few seconds reading the file from a usb 3.0 external disk. It is slightly random but always happens in the above mentioned situation.
The computer is a new computer, about 3 weeks now. This has always happened since it was built.
I thought i had resolved the issue when i discovered that the disk had some errors, by running chskdsk, (it came from a mac computer) and was managed well by windows. Right now the disk is fine.