My fone went dead while upgrading from WP 8.1 to 10. The fone shows spinning gear and sad smily at the end and restarts again. While downloading the firmware for my lumia 620 using WDRT, i couldnot download completely.
My firmware version is:RM846_3058.50000.1425.0001_RETAIL_apac_thailand_210_01_443768_prd_signed.ffu.
I have full update of windows 10 64 bit installed from updating 8.1 ...when I try to install that web app it stucks after win usb cointallers says error code0x80091007 the hash value is not correct
View 2 RepliesI would like to revert from windows 10 to windows 8.1, as I install a preview version of windows 10 which has a so many bugs and due to that my phone is getting hang and unable to use lot of features
View 1 RepliesI have windows phone 10 preview and its damaging my phone and now i want to roll back to 8.1 i have the microsoft lumia 535.
View 1 RepliesI recently have been trying to download the windows 10 ISO with their media creation tool but when ever I start the download it just sits at 0% and spins. I have exhausted everything that I can think of for why it won't be working.
I have redownloaded the media creation tool. I have more than enough bandwidth. I have turned off my firewall and antivirus. Run the media creation tool as admin. Nothing
I'm running the latest build on my Surface Pro 3, but keep getting this error in Windows update. I can't find any information about this error code.
View 1 RepliesI've been trying lately to update my Window 10 Laptop (previously Windows 7) to the latest build through WMCT (Windows Media Creation Tool), but I failed three times,
I downloaded the WMCT from Microsoft website. For the first two times I ran it, it failed through the updating windows phase (copying data, installing drivers and features, and a third one).
I tried deleting the content in Window/SoftwareDistribution/Download, and re-running, but also failed at the beginning of "Installing Drivers & Features". I am able to download everything and "preparing to install" normally, but it is just at that phase where I get a message saying "We are restoring the previous version of Windows".
Here is a snap of the error I just got after successfully "restoring to the previous version of Windows".
I upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it. Then I was using my laptop it flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable.
View 3 Repliesi was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 RepliesI cant download any apps from the windows 10 store. It gives me a try that again error code. I noticed that i am using version 2015.7.1.1 of app store and my mums pc is on a newer one.
View 1 RepliesI downloaded the ISO using Ms's creation tool -- I selected create ISO.
After the download it prompted me to burn to a DVD -- I didn't want that because I was going to use rufus to create a number of USB sticks so I exited the program.
Now I can't find the ISO
Here is the problem, im trying to use the media creation tool to download the W10 iso, boot from a dvd and do a clean install, deleting all my data.
But the media creation tool seems to not be downloading a thing. for exalmple, i setup /Desktop as the download folder, but when it finishes, there is nothing downloaded. i've tried refreshing and a lot of stuff, but there is nothing. and it gets even worst.
Look at this sreenshots:
The file doesnt even allows to get deleted, it says it does not exist. The same to any change i try to do to the file.
I've tried lots of times, and lots of things. I dont know that to do, i really need to clean-up my pc, the same things happens when i try to download it to a usb flash drive.
Im currently trying to install windows 10 onto my pc but my C drive is only left with 13gb of space. How do i change the download location to other drives?
View 1 RepliesRecently, sometime after getting the free upgrade from Windows 8.1 to Windows 10, I noticed my DVD/CD drive was no longer being acknowledged by my laptop.
I went into Device Manager and found "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I uninstalled the device(TSSTcorp CDDVDW SU-208BB,) and restarted. Nothing changed, so I tried going into registry and deleting UpperFilters and LowerFilters, and again restarted. No change. When I start my computer in safe mode, it works fine.
I also tried buying an external dvd/cd drive, plugged it in and installed drivers. It came out with the exact same error.
My laptop is a Toshiba Satellite S55-A5236.
(I even heard that uninstalling iTunes sometimes works, tried it, didn't work.)
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 RepliesI got an aorus x5 about 1 week ago which came with windows 8.1 which I immediatly upgraded to windows 10, but the internet dowload speeds are incredibly slow purely on that laptop, I have tested the internet speeds using speedtest.net and on my old laptop (an msi gp60 2pe) I am getting 40.23 mbps download and 7.67 mpbs upload with a ping of 17ms on firefox, on my phone (a sony xperia z3) I am getting ping 20ms, download of 26.96mbps and upload of 8.84mbps on their app, and on my aorus I am getting anything from 0.01mbps to 4.36 mbps dowload and 8.67mbps to 8.92mbps upload with a ping of 9-14ms, having tested with edge, ie, firefox, chrome and opera. I am not running any amd hardware and I have disabled bandwith control through killer network manager, however at the time of writing when I test through killer I got 4.98 and through firefox I get 1.42 (both use speedtest.net), so I would assume it is a regulator of some sort, but I can't find one anywhere. I also get reasonable speeds through steam (around 11mbps) but it is quite a way off the 35 mbps down and 7mbps up I am supposed to get
View 1 RepliesI connected an audio cable to my laptop but when windows asked what the cable was i accidentally checked the box that said microphone. Now i can't change it anymore and my audio device is in the recording tab instead of the playback tab. How do i change this?
View 1 RepliesWhile using the media creation tool to download/install windows 10 I always get "Something Happened" I looked online changed my language like I am supposed to tried using a flash drive to make it install from media, nothing.
View 1 RepliesThis morning I started the windows creation Tool to download Windows 10 ISO to do a clean install. About 10 minutes into the download the machine lost power. I rebooted into the machine and tried to run the Tool again, but all I get is "Setup couldn't start properly. Please reboot your PC and try running Windows Setup again". So, I rebooted and all I get in the same message. What can I do to fix this?
View 1 RepliesSo Im trying to install a new graphics card, and I have to tweak some settings in the bios. Unfortunately, when I try to open it(pressing escape at startup, scrolling down, and selecting uefi settings and pressing enter) nothing happens. I looked this up, and it said to go to advanced startup and go through some steps to get to a menu that supposedly contains "uefi firmware settings". Now, I confirmed that this is the right menu, but the option is just not there. I thought about updating my BIOS, but there are no updates for it available.
View 9 RepliesI have just upgraded to Windows 10 from windows 7 home edition, I have problem while creating system repair image disk. I have inserted a blank dvd but while the create image app is running it shows error message called Unspecified error,
View 1 RepliesI've had Win10 installed for ages and no problems until Upgrade 1511 came along. How come Windows 10 worked all that time and now refuses to upgrade?
Upgrade to Windows 10 Home, version 1511, 10586
error message:
"Windows 10 couldn't be installed
*Windows couldn't be installed because this PC has an unsupported disk layout for UEFI firmware."
I upgraded to Windows 10 from Windows 7 (32Bit), Since, I have lost access to my DVD drive. The Device Manager shows:
The drive has always been connected and worked fine with Windows 7; the hardware has never been altered or messed about with.
So I decided to check the UEFI Firmware Settings via Settings>Recovery>Advanced Set Up>Troubleshoot>Advanced Options I don't get the option to enter UEFI Firmware Settings; All I get is the System Restore, System Image Recovery, Startup Repair, Command Prompt and Startup Settings.
I updated to windows 10 on my Sony Vaio fit 13a SVF13N25CG (running Windows 8.1 when bought) yesterday. And I updated by following the instructions from sony.
After updated, I wanted to clear all data on my notebook, so I executed windows 10 factory reset (didn't use the factory reset provided by Vaio). So all the pre-installed programs, including Vaio care, are lost. I just want to reset the notebook to the situation when I bought it. However, when I executed Vaio recovery solutions and try to "started recovery wizard" -> "skip rescue", a error 393 appeared (An error occurred while executing an application).
What can I do to solve this problem? I just want to reset my notebook to its factory setting (same as when I bought it).
I made a recovery usb using vaio care before I carried out factory reset. But it didn't work under the rescue mode of Vaio (same as the error 393 mentioned above, to "started recovery wizard" -> "skip rescue", a error 393 appeared).
What would be causing this?
svchost (3972) Database recovery/restore failed with unexpected error -566.
Many instances of this error in my event log.
Running windows 10 pro with November update....
While trying to create a recovery dish I get message that an error occurred and unable to create a recovery disk. If I uncheck backup system files to recovery drive it,creates the drive. Not having the system files will I still be able to use it to boot my pc if I need to. Originally Windows 7.
HP Pavilion p2 PC
Intel Pentium Processor G62OT