I just put a gtx 750 and an antec earthwatts green psu into an ol computer with a q6600, It runs windows 10. When I try to boot it up it gets to the windows logo and the loading circle and then the monitor says "no signal" and then turns back on again to the bios logo.
View 1 Replies
It asks for wifi details, privacy settings, says "Just a moment" then restarts. Then again, and again.
View 6 RepliesI have attempted to download windows 10 around 4/5 times, the download completes and states that my computer needs to restart upon which it claims it is configuring the windows 10 upgrade. I would assume from this point it would restart into the windows 10 configuration however each time I have tried it it restarts back into windows 8 as if nothing had happened.
My laptop then opens up windows update and says I am able to download windows 10. This is really frustrating as I can't even seem to get into the windows 10 setup.
As you can see I am attempting to download again but there is no trace at all of it attempting to install windows other than this failed update that you can see here.
I am using an HP Pavillion 15-n268a laptop.
Every time i restarting Windows 10 by button RESTART from START in next boot i have Automatic Repair. On next boot i am able to boot fine to Windows 10. Event viewer showing that system was not closed properly, but it was closed properly. Software or hardware related?
CPU : 4790k stock good temps
Ram: 2x8gb DDR3 Kingston Hyperx
Psu: Corsair 750
RMMb: Asus Sabertooth Z97 Mark2 UEFI
SSD: Samsung Evo 250 GBWindows 10 is on MBR partition formatted.
Before installing Windows 10 I clean reinstalled my Windows 7 onto a new SSD but inadvertently left my BIOS boot drive as my old HDD. Now I find that I have my windows 10 boot files in the HDD and the rest of the OS on the SSD, so I am still dependant on that old HDD. It's quite old, and I tried to swap it out to a new HDD but found this issue.
I've tried BootRec /RebuildBcd, BootRec /FixMbr and BootRec /FixBoot, rebooting the PC between each, but without success. I want to make the SSD bootable, what have I missed?
After updating to Windows 10 it worked fine for 2 days and now my pc keep restarting itself when I try to do something, usually around 5 minutes after startup. I have turned off the "restart if crash"
Windows 10
Intel celeron 2.70 Ghz
6gb ram
64 bit
When I open certain folders, Windows Explorer just restarts itself. There is no "explorer has stopped working" message and the screen doesn't fade as if it's hanging.
Sometimes, it just closes the explorer window instantly when opening a folder and reloads the taskbar, but sometimes it opens the folder, shows no files and says "Working on it..." for about 5 seconds and the entire PC freezes before closing the folder and reloading the taskbar (essentially restarting explorer).
I can't access files on a certain folder that I need, and I even tried copying the folder I need to access and pasting it onto my desktop to see if I could work around it that way, but that just causes the same thing to happen and doesn't paste the folder.
It only seems to happen in folders with certain files in them. I program multiplayer game servers and have quite a few different folders containing the files for these different servers and it only seems to happen with these folders. It's like explorer has a problem with showing a particular file type or something.
When I restart my computer I have a message that I have an app open.But I never saw this one until I installed W10. It says it is Faceaway Countdown dlg.I looked on the app list from the computer and it is not there. I searched google and did not see it.Is this a part of MSFT or google because I use their browser ? Or is it phishing ?
View 1 RepliesWhat this error is that I get sometimes when I go to Start/Power/Restart? It's it hardware related?
View 3 Repliesapparently since i upgraded to windows 10, whenever i install app that ask/required for the system to reboot to finish up installation, windows 10 doesn't pop out the "Windows need to restart etc..bla bla, Yes / NO " dialog box. it just auto restart as per the application need i guess.. is there anyway to make window 10 to ask for my permission to restart instead of just restarting on its own.
View 2 RepliesWhile Windows 10 was updating the electric went out. PC will not boot up. Did restore PC, remove all of my files. PC still shows Resetting this PC 30% for Hours.
View 1 RepliesAfter upgrading my Windows 8.1 system to to Windows10 , when I restart or turn on my computer the numbers lock key is not turned on. This may sound trivial, but if I forget about it, my passwords won't work because many of the passwords contain numbers. Is there a way for me to keep the numbers lock key on when my computer restarts?
View 9 RepliesI think I have some registry conflicts. The battery/audio systray icons are no longer appearing, and the screen keeps flickering which causes applications to hang. Sometimes programs will even switch on their own.
If I use the browsers in full screen I don't have unresponsive issues. Though explorer still restarts periodically.
Updated successfully up to 11/11. but from 9/12 all updates after " Security update for flash player..... KB 3119147 has failed. Screen shows updating but nothing is downloaded.
As an aside, and I'm not sure about relevance, If i request restart the system hangs. Showing "restarting do not turn off" but with no activity on drive. It will hang for an hour and will not restart without cold boot.
Photos App is Preventing from restarting?
View 2 RepliesThe build worked fine for a few hours...but while I was watching a video on youtube my desktop rebooted and then it was an infinite reboot loop(works only till the windows loading and when coming to the sign in page it reboots)..
View 3 RepliesI noticed after I downloaded the most recent updates and I disabled the Windows background on the sign-in screen I now have a dull grey screen when shutting down or restarting? When it says restarting or shutting down or when I'm signing in the background is blue, but in between a weird grey screen shows up?
View 4 RepliesI have a PC to 1½ years and recently I upgraded the VGA and Windows 8.1 for 10.
With the new VGA, I used it in windows 8 per 1 month and with the windows 10 for 1 week with no problem. Until in one weekend he gone crazy and began to restart from scratch, without notice. Simply restarted.
Makes 2 weeks to this problem, it was two bad days, Saturday and Sunday, then went one week without restarting, I thought it was neat. Until it happened again on Monday, and now again on Wednesday.
It happened every time when I was doing simple tasks, incredibly when I played games it does not restart. In the days that it was restarting, it restarts several times in succession, and without any warning or beep. One of the times it seemed that he tried to call several times in succession until it was.
What I did to try to solve:
- I changed the memory slots
- Full format (installed windows 10 again)
- I cleaned the pc
- I put it in one take (with power strip with fuse)
- Reseted the BIOS
- I saw the voltages and did not notice anything wrong (on the bios)
- I took and put the video card
- Monitored temperatures: Video card, motherboard and processor. Everything is OK!
My Specs:
Windows 10
VGA: EVGA Geforce GTX970 SC 4Gb
Source: Corsair CMPSU-600G 600W Real
Memory: DDR3 Corsair 8GB XMS3 CMX8GX3M2A1600C9
Processor: i5 3330
Motherboard: Gigabyte GA-B75M-D3H
HD: SG Barracuda 2TB
SSD: Evo 850 250gb
The strange thing is that it shuts down when I'm doing beasts things, using chrome and worse, it is a few days without giving the problem, but when you give it gets the whole day restarting, and sometimes, he does not expect Windows finishes the boot, he ta still carrying (and looks that the ssd loads fast) he has restarts.
I tested it without HD, SSD and VGA and changed the memories in all slots and interspersing them. He restarted on the Bios.
We try to reset the bios again and he was 3h without restarting in those three hours we monitoring the temperature playing heavy games like The Witcher 3, but nothing happening. When he gave 4h the PC restarted again.
Since I've upgraded to windows 10 a couple weeks ago, I've come to notice in the last couple days that when I press shut down from the start menu, typing shutdown -s -t 0, etc. it does not completely shut down the computer. It starts to go through the process, it says it's shutting down, monitors turn off, but the power light stays on and it just restarts. I have only gotten it to shut down correctly about 85% of the time through the login screen and pressing and holding the power button (which I know I should refrain from). I am completely up to date on windows. I have not made any hardware changes since my upgrade to 10.
This issue has also now come up on my Lenovo G50 laptop. Same shtick, says it's shutting down but ends up restarting, never shutting down completely. I also have since reverted to Windows 7 on my desktop and have no issues. I have unchecked the hybrid shutdown box on my laptop.
I've upgraded to windows 10 on release and have been away on holiday for the past 2 weeks. Today I come back to find explorer.exe keeps restarting about once every 2 mins and is causing full screen games to minimise and change the computer focus.
View 1 RepliesI recently built a new pc and installed Windows 10 on it via usb 3.0 . Now, whenever I turn my pc on, it shuts itself off and turns itself back on again and this goes on in an endless loop.
Specs:
Gigabyte Z97m-D3H mobo
Evga Nvidia geforce gtx 960 4gb gddr5 ssc
Corsair Vengeance 16gb ddr3
Intel corei5-4670s 3.1 ghz up to 3.8
Intel SSDSC2BA100G3
Corsair CX600m psu
I'm on Win 10 pro with all the updates installed. I just did a clean install today think something went wrong but the problem has not stopped. The system is pretty much like new with barely any programs installed and the problem still happens. I'm using Winrar 5.21. When I try to extract the 6GB rar file, the system suddenly restarts. Also when I'm trying to build previews/analyse a large amount of files in Adobe lightroom the same thing happens. I'm assuming that any app using a lot of RAM/CPU will exhibit this issue. I suspect I have a hardware RAM or CPU issue and that it may have gone bad. How do I check my hardware first? I'm certain it isn't a windows issue because the moment the os booted to the desktop itself I check the rar file extract and the computer abruptly restarted.
View 7 RepliesI have a SteelSeries Siberia 650 headset and I'm using their latest drivers/controllers to handle the audio from my computer. The thing is I'm facing a weird problem since then.
Everytime I restart my computer (using the 'Shut down' option and turning it back on), my speakers come muted, just as the image shows:
If I use the 'Restart' option it comes back alright:
Here's an image of my 'Recording devices' tab:
This is how my device manager looks like:
And finally SteelSeries controller:
So far I've tried reinstalling the original headset drivers and I also tried using the 'Uninstall' option under the device manager. None of them worked.
My computer is a Toshiba 64-bit laptop.
I had a job running last night, downloading stuff from the internet. I knew would take approximately 30 hours to run. It ran most of yesterday and I had hopes I would wake up this morning and it would be finished.
Windows 10, in its infinite wisdom, installed updates and restarted my computer during the night. My job was ended and I had to restart it this morning. I can't run anything else that accesses the internet while this is running because it slows this job down too much. So now I have another day or more of not being able to do anything else on the internet.
How can I stop the updating and restarting of my computer? It is my computer, I should have control over that.
I did the free update to windows 10 yesterday and now have no audio on an HP 6730b. Speaker icon on bottom task bar has red X next to it. Troubleshooting not coming up with anything and restarting has not worked.
View 1 RepliesI managed to eliminate the password requirement when starting up and restarting but I haven't figured out how to do it when the computer wakes from "sleep". Is there a way to do that?
View 2 Replies
