I have a laptop that is directly connected to a wired WAN internet connection and I share the Internet connection with other devices using the netsh command prompt. Is there any way to see who are connected and more importantly, how much bandwidth each device is using?
View 2 RepliesUnder Network & Internet i cannot see wifi although wifi adapter is installed and showing that it is working properly.
View 1 RepliesI am trying to start a hosted network on my Windows 10 system, but every time I got something like "The group or resource is not in the correct state." I then ran "netsh wlan show driver" and see that it is using a Realtek RTL8723BS driver which says it does not support hosted network. I also don't see any "Microsoft hosted network virtual driver" in my Device Manager, even if I turn on the showing of hidden devices. Does that mean there is no way I can get a hosted network to run on this device? Is there some way I can get the driver to support hosted network? (I already updated to the latest version of the driver and rebooted, and that did not work).
View 9 RepliesI cant create a virtual wifi network using this command : netsh wlan start hostednetwork (the "set" command works)
the solution is to enable Microsoft Hosted Network Virtual Adapter which is missing , and yes i tried to show hidden devices ..
Windows 10 is very slow to detect all USB devices I connect to it, whereas Windows 8.1 was nearly instant.
Since upgrading, it takes about a minute for Windows to realize that I have connected a device to it.
Laptop: HP Pavilion Notebook - 17-f202na
I purchased this laptop some months ago using Windows 8.1. I had so many problems and hated the OS so much I upgraded to Windows 10. I have found that some devices I plug in via USB work just fine but some do not. It seems that the more sophisticated devices do not work.
I have a few HDDs from old laptops that I have put into caddies - these work fine connected by USB. However the following do not work at all when connected by USB.
* Nook Glowlight
* Samsung Galaxy S3
* Toshiba Stor.E HDD
* CBA Digital HDD
They all light up indicating that they are charging however there is no drive registered in This PC, nothing appears in Devices and Printers, nothing that I can find anywhere that indicates that the PC detects a thing. There are no error messages or notifications. This is true for all the USB ports.
I've tried a few things over the last few weeks for each device as I've learned that another doesn't connect but I think it might be best to start from scratch and assume nothing about how far I have got. I'm finding ways round connecting the Galaxy and there's nothing too pressing right now on the HDDs that I need to access.
I recently built my computer, and it was working fine, I installed all of the drivers, but when I installed my graphics driver, my monitor just turned off. Now when I try and boot my machine, it goes to the windows 10 logo then nothing. My screen is black and my USB connected devices just turn off.
Specs:
mobo - asus m5a97 r2.0
GPU - Zotac GeForce 760
CPU - amd fx 8350
PSU - corsair 600w
For a while, whenever I connect my wireless headphones using Bluetooth to my Windows 10 laptop, the internet goes a lot slower for an unknown reason.
View 9 RepliesI was having some network problems and in the course of fixing them I uninstalled the network driver for my TP-Link AC600 Archer T2UH USB network card. This card has been working without a problem for months on 2.4 and 5Ghz channels and at high speeds > 150Mbps. When I attempted to reinstall the drivers, I can get connected to the WiFi but I get the Windows 10 message "Secured, no internet I have tried numerous drivers and I have now tried to connect using two separate NIC cards. (I had an old 802.11n usb adapter) as well as a 5Ghz wireless bridge that I used to use that connects to the PC via ethernet. All of these have connected to the network, but I get the same "Secured, no internet" message.
The only thing I can think of at this point is that I've somehow screwed up the adapter. I've looked at that ipv4 settings are they are all set to "Obtain an ip address automatically" and do not have a DNS name specified. I have attempted all the windows repair options as well and they return telling me their may be something wrong with the driver or the adapter. I'm at wits end.
My Dell laptop which is windows 10 only has a chronic problem with the adapter constantly needing to be reset. Searching for similar problems led me to the possibility of a USB adapter.
View 1 RepliesI got a new IBM Lenovo about a month ago that was running Windows 8.1. Before doing anything I immediately upgraded it Windows 10. When I hover over the network icon it says "Not Connected-Connections Available." The thing about it is, is that I am connected to the network and the Internet. I did update the network card driver today. I thought that would solve the problem, but I'm at a loss. It wasn't really a big deal until I wanted to connect to twitter and the weather apps that pop up when you click the Windows button in the lower left corner.
View 3 RepliesMy laptop is indicating that it is connected to my home network and that it has internet access but when I go to the network center it says that it doesn't have any connections. Attaching an ethernet cable doesn't work (which was an earlier problem too) I already updated my drivers and ran the troubleshooter but it didn't work. I also restarted my router so I did most things I can. Side note: It happened really suddenly from one moment to the other...
View 1 RepliesI started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
I have two 2008 Mac Pro computers running a bootcamp setup (OSX El Capitan/Windows) and have a 50 Mbps cable connection with Linksys WRT 1900AC wireless router. The wireless throughput on both machines worked flawlessly in Windows 7 but after upgrading both to Windows 10 the throughput dropped from 50 Mbps down to apprx 1.5 Mbps. Both computers use a Broadcom 5200 series 80211n chipset which are running the Microsoft signed version 5.100.245.200 driver. The wired network runs at full speed, and in OSX both wired and wireless connections run at full speed. I've seen a number of others report the same issue, but have never seen a fix that seems to work. I've tried updating the driver through Windows but get a OS message stating that the best driver is already installed. At the moment I have Ethernet cables strung across the living room floor, and would like to get back to wireless.
View 3 RepliesI was with win7. Everything was working fine. I upgraded to win 10. Now my computer does not recognize my wireless network. My dual display does not work.
View 1 RepliesFrom a PC (called PC1 later on; running W10), I do not see other PCs or multimedia boxes connected on my local network.
Using 192.xx.yy.zz doesn't work.
From a W10 tablet PC (called PCt later on), I see other connected devices: Dune HD and PC1. From PCt I can even navigate into PC1 directories.
In PC1 Network and Sharing Center, I cannot enable file sharing.
When clicking on the button to activate it and then saving the changes, I notice, when reopening the parameters window, that it hasn't been changed. It remains disabled.
The "computer browser" Service will not start because of dependencies (1068 error).
The "workstation" Service will not start because of dependencies (1068 error). This service is required to "computer browser"
When I power up my laptop it connects to a network, that I don't have (xfinitywifi). I have deleted the profile, to no avail, I get to my network by cycling my wireless. Its really annoying.
View 2 RepliesI have two wireless networks at home, and one is faster than the other. This is because the slower one is wired to my desktop, and the modem and router are the same box. So I would like to remove the slower from machines wireless connected. I searched the forum, and got a solution, the command below, but the answer, as can be read, is that the filter does not exist in the system. I am attaching a screen that shows GVT-15DF at the list of connections.
C:Userslarau>netsh wlan delete filter permission=allow ssid="GVT-15DF" networktype=infrastructure O filtro nao existe no sistema.
I am unable to access the windows store but i can connect to the internet with nearly everything else...
Not a massive issue as I don't use the store much but it is quite annoying as it only happens sometimes.
I believe all my drivers are up to date... the MOBO is a asus b85m-itx..
I have a Realtek PCIe GBE family controller that is acting very finicky within windows 10. My internet is on and off, and fluctuates a lot, Is there any solutions to the instability in my network? When i run the network diagnostic it says default gateway unavailable, but I have to do this nearly every 4-5 minutes. This is what my computer components are: [URL]
View 1 RepliesSo after 2 failed attempts at installing Windows 10 on an Acer Aspire Z5801 PC, I finally managed to succeed. However, a new problem appeared after installation.The Wireless network adapter went completely missing. Windows does not detect its existence at all, it's like the PC doesn't have one installed. It doesn't appear in Device manager + isn't listed as an "unknown device". It's simply not there at all.The wired network adapter is there, but not wireless.
Installing the driver from Acer's website - I had to select Windows 7 64-bit as the version is all that's available for my adapter.I used a USB stick to transfer the setup files to the Acer PC. It said it successfully installed but still didn't appear, even after a reboot.Used a USB wireless adapter (Netgear) to see if it was an issue with how Windows 10 handles Wi-Fi - nope, that installed and worked fine.Scanning for Windows updates after using the USB adapter. Some updates were found and installed (no driver ones though), but still no Wi-Fi.
In the end, I reverted back to Windows 7 and what do you know? The adapter got recognised again.The USB adapter isn't a viable solution since it's required by another PC. I just used it for testing purposes.
I recently brought a new wireless network adapter for usb (Asus usb N14) and since I've started using it the connection is really unstable, I'm on the same connection on my iphone and it's just fine but on my pc it's really struggling, I've ran speed tests and it'll work fine when randomly it'll just go down, I'll still be connected to the router but have no internet. Right now looking at the wifi graph in task manager it literally going straight up for a few seconds then straight back to 0 when downloading a file, and I'm unable to download any large files because it'll just fail after about 30 seconds.
I've updated it to the latest version with no change in performance or reliability. One other thing I'm at Uni so other people will be using the connection and I've no access to the router unfortunately.
I'm using a Linksys AE2500 network adapter on Windows 10 technical preview and when ever the adapter is plugged in, my CPU usage nearly hits 100%. I've checked for malware and that doesn't seem to be the problem.
View 1 RepliesWhich Network Protocols should I enable or disable for my PC?
My PC usage and router set up:
- file downloading while also browsing web or streaming video
- I don't do any lan/network sharing
- Torrent file sharing
- QOS is disabled on my router
- The PC is connected with Ethernet cable
My current settings
[ ] Client for Microsoft Networks
[ ] File and Printer Sharing for Microsoft Networks
[ ] QoS Packet Scheduler
[ x] Internet Protocol Version 4 (TCP/IPv4)
[ ] Link-Layer Topology Discovery Mapper I/O Driver
[ ] Microsoft Network Adapter Multiplexor Protocol
[ ] Microsoft LLDP Protocol Driver
[ ] Internet Protocol Version 6 (TCP/IPv6}
[ ] Link-Layer Topology Discovery Responder
my internet speed is fast,i am unable to use it(i.e. in notebook I am unable to display interest also voice is not working).This service is not available in our region but as changing REGION and LANGUAGE option to United States(US), it worked. My friends are able to use it even in slow internet connection but I am unable to use it.
View -1 RepliesWhy this service takes maximum bandwidth . So i have turned off from services.msc and after restart back to start again and take my full network
View 4 Replies