Wireless Software Is Incompatible?
Mar 7, 2016
Yesterday, I successfully installed Win 10 on a neighbor's Win 7 laptop. However, it could not connect to the internet, explaining that his Wi-Fi software (which worked fine with Win 7) was incompatible with Win 10. I switched him to DSL and he is doing fine. But how do I get him compatible Wi-Fi software?
My three laptops are all Windows 8 Spanish edition, upgraded to 8.1, and then upgraded to 10. All run wireless with no problem.
View 2 Replies
Similar Messages:
Dec 28, 2015
I have a windows 7 system that I want to upgrade to Win10. The advisor says that the old on-board graphics card (built into the mobo) is not compatible. I went out and purchased a new PCI-e card that is compatible but the advisor continues to say that I can't upgrade. There appears to be no way for me to disable the old graphics chip in the BIOS.
I also tried to re-run the advisor analysis tool via the command line as mentioned in this post: Solved Cannot update to Windows 10 due to old video card - Windows 10 Forums
But the advisor still says that I can't update due to the old card.
Can I still upgrade to windows 10? If so what should I do?
View 4 Replies
Jan 11, 2016
I have a laptop that was a Windows 7 Home Premium machine (HP dv6-2150us) that had an Windows 10 in place update performed on it a few months back (Nov 5, 2015). It had been running fine but recently had been randomly crashing. Two days ago, it crashed again and would boot to the "Startup Repair" mode attempt to run, then tell me "Startup Repair" couldn't repair your PC. and endlessly loop through that (if you told it to reboot) unless I went the Advanced Options.
I tried accessing Safe mode with and without networking, but not luck. I can get to the command prompt.
At one point it out of the blue it displayed the path to the "SrtTrail.txt" file which apparently is the log train for the "Startup Repair". The screwing thing is I check the date/time on the log file and each time the "Startup Repair" runs it does update the file whether it displays it on the screen. So apparently it could be random whether MS lets you know where to look for clues. Yeah MS!
Any way the I looked at the "SrtTrail.txt" and it states that the following pass.
"Check for Updates"
"System Disk Test" "
Disk Failure Diagnosis"
"Disk Metadata Test"
"Target OS Test"
"Volume Content Check"
and the Root cause found "The operating system variation is incompatible with Startup Repair"
I did a bit of Googling and found others with the same problem : [URL] .... But they did not have success in reviving the Machine
Any way of resolving the issue that would leave my programs intact? Is it as simple of having the correct BCD entry? If so, what the BCD entry should be the entry for a Windows 7 box that had a Windows 10 in place upgrade done?
The current entry in the boot record is
osdevice: partition=E:
Systemroot: windows
resumeobject: {3c5d113c-777-11e5-82d9-8199ff9a6bfc}
nx: Optin
boomenupolicy: Standard
[Code] ....
View 1 Replies
Nov 16, 2015
Windows 10 Disk Usage is 100% Its so slow that its unusable for me. I tried startup repair with and without the CD and it fails with the Log saying its due to an incompatible OS. Note: I can only use my PC in safe mode and I just recently upgraded from Windows 7 a few months ago.
View 1 Replies
Sep 6, 2015
I like to think I am fairy familiar with installation and set-up but this has got me beat. After installing Windows 10 my wifi continually drops out every 10 minutes or so. Cable connections are fine and other devices in the house are fine; just my laptop.
View 1 Replies
Oct 22, 2015
My Dell laptop which is windows 10 only has a chronic problem with the adapter constantly needing to be reset. Searching for similar problems led me to the possibility of a USB adapter.
View 1 Replies
Oct 11, 2015
Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
View 9 Replies
Mar 13, 2016
I was update my windows, after that i turn off then turn on my laptop and then my wireless connection couldn't on even i tried to restart and try to click on, it cant be on, how to fix this things? I really need to connect to internet
View 3 Replies
Aug 19, 2015
I installed the upgrade on my toshiba satellite everything seems ok except i cannot connect to the internet via wireless only ethernet cable and there is no sound. I have run a toshiba diagnostic and it offers no resolution.
View 1 Replies
Jan 27, 2016
I just got my first PC today and I'm a bit of noob. I tried to connect to the internet but noticed that there simply was no option to connect to a wireless network. A wired network works fine though. I checked on the internet. I have a gigabyte z170x gaming 7 as my motherboard. URL....
View 1 Replies
Aug 10, 2015
I am having major issues with Windows 10 Pro and my wireless card in my desktop. I have an ASUS Maximus Impact VII with the mPCIe Combo IV WiFi card. I had to disable the card in the BIOS just to get Windows 10 installed. I re-enable the card and can boot into W10, it shows up in Device Manager and adapters (greyed). I can't enable it. Tried uninstalling and deleting drivers, then scan for new hardware. It kicks the card on and I get WiFi bars in the taskbar, but then immediately freezes Windows. This is coming from a clean install of 10, no VPN in 8.1 and I tried the reg delete command to make sure. I purchased a USB WiFi adapter to see if it would work. Same results. I decided I would install Windows 7 out of curiosity. SAME THING. It's strange, the WiFi works flawlessly in Windows 8.1, but not at all in 7 or 10. I have tried the 3 latest BIOS revisions for my motherboard, as well as the only available W10 driver for the adapter.
View 1 Replies
Aug 1, 2015
i have got an upgrade of window 10 2 days back...i have installed it but wireless driver is not installing on my laptop as i have tried it many times....i have installed driver tool kit but it needs internet as i can not connect to any W-network because of driver incompatibility.
View 1 Replies
Oct 3, 2015
I have sony vaio series s wireless connection was working before now when i tried to turn on it's directly come to off. I cannot connect to my hotspot also there is and x sign on the wireless logo on the task bar !!
View 1 Replies
Dec 9, 2015
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
View 4 Replies
Feb 10, 2016
I have just bought an HP laptop running windows 10. I cannot connect to internet wirelessly as when I select my network connection it requests username and password. (Screen shot attached)I only have a network password for my connection and have never had or been requested for a username.
We have a couple of laptops at home and they connect with password only no problem. It is only this laptop that requests both. I can find no way past it and cannot connect. It connects via cable fine but thats obviously not ideal for portable laptop.
View 9 Replies
Sep 16, 2015
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 Replies
Jan 26, 2016
Upgraded a client's Windows 8.1 machine to Windows 10 Pro today and it's now unable to "see" the HP OfficeJet 6600 wireless printer directly behind it. I've assigned the printer a static IP address and I CAN ping it AND print to it from a wireless computer in the back office. However, I can NOT either ping it or print to it from the front computer. The Add Printer wizard never sees it either.
The computer has both a wired Ethernet and a wireless adapter. Both are enabled and show up in IPCONFIG.
View 1 Replies
Aug 11, 2015
On installing Win !0 there was no wireless function, but win 10 initialised the card however when the laptop sleeps the card drops out and it has to be reset every time the card is Intel(R) Pro/Wireless 3945ABG. If the laptop is kept awake there is no problem
View 5 Replies
Aug 20, 2015
When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
View 19 Replies
Aug 31, 2015
Once I changed to Windows 10 I lost my wireless connection. My computer won't let me turn it on and it gives me the error: 651 response. Nothing seems to work.
View 1 Replies
Oct 29, 2015
I was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically
[Code]......
View 6 Replies
Nov 8, 2015
... in Control Panel cannot turn it on... Troubleshooter says "Wireless capacity is turned off".
WLAN Auto Config Service IS running.
The web sites that say to remove a Registry Key results in the Key NOT found and then trying to run its' companion command line utility results in not found.
Before updating to Windows 10, the Wi-Fi worked properly.
Latest Windows Driver IS installed. How to get my Laptop Running so that I can use it Wirelessly instead of having to connect via Category 5 land line cable to the router.
View 2 Replies
Nov 7, 2015
I upgraded from Win 7 to 10 and now I can only connect one wireless device at a time. All of the wireless devices that I used at the same time in Win 7 work in Win 10 but, now only one at a time.
View 1 Replies
Dec 27, 2015
It will not allow me to activate the switch in Windows 10?
View 1 Replies
Nov 1, 2015
I have two 2008 Mac Pro computers running a bootcamp setup (OSX El Capitan/Windows) and have a 50 Mbps cable connection with Linksys WRT 1900AC wireless router. The wireless throughput on both machines worked flawlessly in Windows 7 but after upgrading both to Windows 10 the throughput dropped from 50 Mbps down to apprx 1.5 Mbps. Both computers use a Broadcom 5200 series 80211n chipset which are running the Microsoft signed version 5.100.245.200 driver. The wired network runs at full speed, and in OSX both wired and wireless connections run at full speed. I've seen a number of others report the same issue, but have never seen a fix that seems to work. I've tried updating the driver through Windows but get a OS message stating that the best driver is already installed. At the moment I have Ethernet cables strung across the living room floor, and would like to get back to wireless.
View 3 Replies
Jan 16, 2016
In windows 10 where do I see my wireless internet connection speed?
View 1 Replies