I downloaded windows 10 yesterday and everything seemed to be working fine. However, every time I shut my computer, it's supposed to go into sleep mode from which a shake of the mouse will wake it. It is indeed going to sleep, but I can't wake it through any interaction with the mouse or keyboard. The power light is still on, indicating that the computer is sleeping, but I can't get it to wake up. I have had to hold the power button to turn it off and then on and I'm pretty sure that's terrible for my computer to not shut down properly.
today my desktop went to sleep mode, and i had problems waking it up, i didnt know how to do it.Whats the default way to do this in a desktop pc? And even better if its possible, i would like to be able to wake pc by mouse clicking, is there any posible way to do this?
after installing windows 10 my computer don't wake up from sleep mode. I have to force turn off by long pressed the power button. and then turn on again. before install 10 I don't have this issue.
After an upgrade to Windows 10, my HP Compaq 6005 Pro Small Form Factor will not wake up properly from sleep. After sleep, if I press a key on the keyboard or press the power button, I hear the fan and hard drive start up, and the monitor goes from completely off to on yet black. (I can see a small difference, and the monitor reports that it receives a signal.) But nothing happens, including when I press various key combinations such as those which would cause rebooting. Sometimes my mouse pointer is visible but usually not. If so, the pointer will not move. If I hold down the power button, killing the power supply, and the press the power button again, the computer wakes up (not rebooting) to the condition it was before.
As a history, this machine had a clean Windows 7 install, then a Windows 10 upgrade, then a Windows 10 clean install.
[I have a vague memory that the computer originally went to sleep and woke up OK a few times, and now doesn't. However, my memory could be wrong.]
I have tried: * all Windows updates * using HP website for all relevant updates, including BIOS * display adapter (graphics card) update * Windows Power Usage Troubleshooter * turning hibernation off and on again in the command line (powercfg /h off and on)
PC wakes every night at 11:36. I have disabled the wake for anything feature and I cannot figure this out. Based on settings its not supposed to wake up. Is there something buried that I need to change or is this just a win 10 flaw?
I hear the computer turn back on and the light is on, but the screen is still black. My mouse and keyboard are unresponsive (can't turn backlight on). I have to do a hard shut down. When it's back on, it's like it woke up from sleep mode, not a fresh restart.
This just started happening today I think so I did a system restore, but the problem persists. The only thing I remember doing today was updating my ATI drivers.
I have an Asus Ultrabook, UX302L. It came with windows 8 from the factory, I upgraded it to windows 10, all nice and wonderful. About a month ago, I replaced my HDD with an Samsung 850 Evo SSD and I installed a clean copy of Windows 10 which I activated with my windows 8 key. All good till here. But after that my nightmare started:
I can't put my laptop to sleep, because when I try to wake it up it restarts instead, and I lose all my documents, programs started before, etc.
I tried to install a older Intel Management Engine because I found out that the last one is buggy (and it is, I can't even put my computer to hubernate with it, the fans just keep running till it drains my battery, but with the IME 9ish at least hibernation work), I tried to disable fast boot, to install an older version of the integrated intel graphics card driver, tried to put my HDD's to never sleep, disabled hybrid sleep, set the AHCI link power management to HIMP/DIMP, etc.....
HP Pavilion laptop, Windows 10 Pro Intel i5, 2.60 GHz 8 GB Ram.
I was on 8.1 but did a clean install following the guides on the forums and it worked great. Only issue I had was with the Synaptics settings that keeps resseting after reboot but sorted that out.
Now for some reason 90% of the time my laptop goes to sleep I can only get it to work again by rebooting via power button. I have tried various guides on the forum (disabled fast boot, hybernation, etc) but nothing seems to work. If it does work, it only last a couple of hours at best. I have also noticed that the laptop does not always shut down fully...
I have just done a reset again (did a clean install yesterday) and left the laptop on for about 30-45 minutes and it goes to sleep and I can't wake it. I left everything default to rule out any possible changes I could have made to the settings.I am wondering if it's the iso I got from Microsoft website when I did the install...
1. My PC no longer shuts down. It starts to shut down but then never turns off. I have to hold down the power button to turn it off. Really weird.
2. When my PC goes into sleep mode it will no longer wake up. I've pressed every button on the keyboard but nothing wakes it up. The only way to get it back on is to hold down the power button to switch it off, then switch it back on again.
3. Now that Edge has replaced Explorer, I'm having trouble with some websites and also there's an issue with Java. Windows 10 removed Explorer but when I've tried to download it I get the message:
Looking for Internet Explorer? You're in the right place, but Internet Explorer requires a Windows PC.
It was working fine with Windows 7. I upgraded to 10, and it won't wake up. I have to hold down the power button till the computer shuts off and start it up again.
I went to Dell support, updated all drivers, no luck.
Every time my computer's monitor goes to sleep, on awaking the computer will BSOD with "kernel security check failure" or the screen will not turn on and reboot the PC.
I have a 4 yr old custom built desktop upgraded from Win 7 pro to Win 10 pro about 8 months ago. Up until two weeks ago the sleep/wake up has worked perfect. Now the unit will not wake from sleep. I have tried everything I have seen and nothing has worked. It has to be booted from sleep. I have now set sleep time to never and will shut the unit down at night rather than letting it go to sleep.
1) When my screen goes to sleep, I can't wake it up by using the keyboard or mouse. I have to force a hard reboot by pressing and holding the power button.
2) I just had a crash in which my screen became white with grey vertical lines. I would've blamed my gpu but I can run benchmarks just fine..
Windows 10 keep re-sizing my firefox windows when i wake up my computer from sleep. And the windows 10 start menu is also opens up. I would like to fix both these issues.
After updating to Windows 10 Pro recently I get a lot of BSOD's (DPC_WATCHDOG_VIOLATION). Mostly when my laptop wakes up from a well deserved moment of sleep. Also I noticed that sometimes the laptop awakens from sleep when I didn't ask it to wake up.
Culprit (driver probably). Here's the dump file I collected XPS-vr_21-08-2015_120314,69.zip
Recently my mouse pointer has been disappearing when the system wakes in Windows 10 Pro. I can still see it highlighting when moving the mouse and the dialog open with a right click. It only comes back if I open the Task Manager or a separate window. Strangely if I manually put the computer to sleep through the power menu this issue does not seem to appear, it only shows when the computer sleeps after the allotted time.
Not sure if this is an issue with Nvidia Drivers or a Windows Update.
This was working fine on Win 8.1, but since my upgrade my PC now won't wake up from any keyboard, mouse or PC power button press once in S3 sleep or hibernation.
The only way to wake the PC is to reach back to the PSU and turn the power off, wait 5 seconds, then turn the power back on. I can then press the power button on the front of the PC and Windows then resumes from sleep.
powercfg /A returns this:
The following sleep states are available on this system:
Standby (S3) Hibernate Hybrid Sleep Fast Startup
The following sleep states are not available on this system:
Standby (S1) The system firmware does not support this standby state.
Standby (S2) The system firmware does not support this standby state.
Standby (S0 Low Power Idle) The system firmware does not support this standby state.
I have the latest firmware on my relatively new Gigabyte 970A-D3P.
Came across my first major problem. When I try to go into sleep mode (either through the Start menu or pressing the power button), the hard drive light blinks for a second then the screen goes black. BUT... my power light stays on (should be blinking) and pressing it again, the mouse button... nor any key press on the keyboard will wake it up. I had to hard shutdown (holding the power key down for like 5 seconds) for the light go off and had to keep rebooting from scratch.
That's a major pain since waking up out of sleep mode is normally much faster and convenient. To make things worse.... it seems like 10 takes longer to boot up from scratch than 8.1 did. I've yet to see if SHUTDOWN works properly or not. Not a happy camper on the sleep mode issue. It worked under 8.1 just fine.
EDIT: Shutdown goes through a longer process, but ends the same as sleep does...... The power light stays on.
I'm using an HP Envy w/ i7-4510u CPU / 8GB RAM / 4GB Nvidia GTX 850M / 1TB drive
EDIT#2: Now SLEEP and SHUTDOWN appear to be working properly and Windows 10's boot up times are as fast or faster than 8.1 now. It's like a car and trying to clear out the lines of bad fuel before it runs right. Just some weird hiccups.
Yesterday I downloaded and had a fresh installation of windows 10 (means I have no backup of my previous windows 7). Now since installation, whenever my PC goes to sleep I fail to wake it up by pressing any key on the keyboard or touchpad.
I've tried to find the power management in keyboard settings from the device manager but I failed to find any option there.
Have been having problems with the my Dell XPS desktop lagging and being slow to wake up since getting Windows 10. Today it won't wake at and black screen continues even after unplugging and forcing off with power button.
I upgraded to Windows 10 and now I cannot wake up my computer from sleep mode. With Windows 7 and 8.1 all I had to do was tap any key and the computer would wake up. Now that doesn't work. I have to press and hold down the power button to force a shut down and then restart. This problem only appeared after I installed Windows 10. How can I fix it?
