After Reset Mouse Not Working - Stuck At Lock Screen?
Aug 16, 2015
I got windows 10 installed no problems last week and all was going fine until yesterday. I couldn't get into the store and a couple of apps didn't run. I tried everything to reset the store app and everything so last resort I went for a reset. And its all grand reset no problem, completed everything and reset but now I'm stuck at the lock screen. Obviously the driver's for the mouse ain't installed now because I can't slide the lock screen up to enter the login. what do I do now?
So I recently downgraded from Win10 to 7 and after everything finished, I can't type in my password or move my mouse! I tried replugging the USBs to no avail and I restarted and booted my pc in safe mode And now I'm stuck on the lock screen in safe mode. How do I fix this?
Big gaming tower with ASUS MB, on-board sound, separate graphs card. I upgraded from Win7 to Win10 and everything went well for a day. Then my USB ports: 2's and 3's and my PS/2 ports too, went dead. Well, they have power but no communication. I figure I could reinstall an image of my Win7 and then roll back up to Win 10 but what is the matter is what I'm wondering.
I installed a fresh Win10 ISO on another drive in the box and that one works fine. The installation I rolled up to Win10 by invitation sticks on the Lock Screen and I can't enter anything at all. So, I can't get past the lock screen. All other USB devices have been disconnected except, at one point, a keyboard and then just a mouse, then just a keyboard on the PS/2. No joy. How to I can fix/hack/reinstall/etc the USB bus drivers? I think that would do it.
BTW, launching Safe Mode under my 7-to-10 conversion install makes the computer throw a "System Thread Exception Not Handled" error Wdf01000.sys Then it reboots automatically and I'm stuck back at the Lock Screen, well, unless I boot to the other Win10 OS on board, in which case I can boot to Safe Mode easily under that clean Win 10 install. That's just not getting me where I want to go. Might be time to just reinstall everything. Even the recent images I have are not what I really want. Win 10 was working so well for me on a Dell laptop I've been using since February.
I upgraded to Win 10 on Friday, and since, despite several resetting PC attempts, Win 10 will not load to the login screen. Instead, it is stuck on a loop flashing between the lock screen and a gray loading screen quickly back to the lock screen -- instead of loading to the login screen. This only happens when I attempt to restart or update my PC. If I go to the lock screen because I locked my PC or it fell asleep, I can unlock it. I have also attempted to reset my PC to the previous build, to no avail. I have no restore points.
Since today morning I am not able to login to my Win10 PC. It starts normal until the lock Screen appears. The clock in the lock Screen is working, so everything seems to be ok. But the System does not react on any keyboard or mouse Input.
The Keyboard is working perfectly in the BOOT Menue (after F2 during Startup). So I am quite sure that this is not a hardware problem.
i did a full reset last night with the clean driver option, it was staying ar 99 percent for awhile last night so i went to sleep. this morning i woke up to it just stuck at being a black screen.i tried rebooting but it just goes back to a black screen after showing the blue windows icon. what should i do
The most recent update has bricked my PC and I am stuck on the boot up screen, I have tried pressing F8 on boot up but don't get the option to reset it, what to do?
Yesterday I set my Bulgarian keyboard layout to be the default one and my German to be the secondary. Then I shut down and today when I tried to log in, only the Bulgarian layout was enabled (Cyrillic letters) and I can't switch to the German layout (Latin letters). You guessed it - my password uses Latin chars . The key combinations Alt+Shift or Win+Space are not working.
Password reset works only with pre-made passdisk or something like that (I haven't set one). I tried going to Troubleshoot mode, but couldn't find anything useful there yet. Running the command prompt troubleshooting option gave me the opportunity to change the keyboard layout, enter my password and use the cmd prompt. There I tried to use the "control" command to set the keyboard layouts but it doesn't recognise the "control" command. Maybe I have to navigate somewhere else (default was system32).
So I was having a problem with my laptop stuck in a "Diagnosing Your PC" loop and then it would say, "Bad_system_config_info", and start the loop over again.
So I booted from a Windows 10 USB to repair/reset it with the "Keep My Files" option. Since then, it's just been stuck on a blank blue screen for the last 20 minutes.
Is this part of the reset process or did something go wrong?
I'm trying to reset my PC to get out a temporary user profile I'm stuck on. Every time I start the reset process, I am sent to a frozen Choose Keyboard Layout screen. I can't use my mouse or touchscreen to choose a layout.
It seems like my Lock Screen wallpaper is stuck on "Windows Spotlight". When I try to change to "Picture" or "Slideshow" in settings nothing happens, and when i choose "Slideshow" and then "Windows Spotlight" the preview turns grey with the loading indicator and nothing more happens.
Would really like to be able to choose my own lock screen wallpaper, though Spotlight is a pretty cool feature.
My Windows 10 Lock screen is not working anymore. Every time i change the lock screen, it is loading but lock screen is not changing. My current lock screen is like this ....
I have followed several similar threads and their fixes for this problem with no result. After downloading the Win 10 upgrade, my system then said "loading updates". Then it restarted with a blue login screen saying "Welcome Back!" And a box to enter my password. The cursor is blinking in the box, but neither my mouse or keyboard works.
I have hard booted several times since the ctrl+alt+delete does not work. I am also not able to access safe mode as none of the "F" keys work during boot up.
I have tried the following:
1. Unplugged all USB devices except keyboard. 2. Turning off internet at the router.
I have a Dell desktop, and upgraded from Windows 7, with a Netgear router/modem. The only way I can get the system to move is if I power off at the main switch after booting up which goes into bios and disc diagnostics, but I don't know enough about computers to know what to do there!
Tried using DDU and it asked to enter safe mode, went to safe mode, it then said "insert bootable media" and I tried to select it from BIOS but I could never get to BIOS because my mouse and keyboard controls were dead. Nothing I've done (plugging, unplugging) has fixed this issue. How to fix this.
When I first setup the slideshow it worked fine. Then, out of the blue, it stopped working (due to an update I thought). But since then it comes and goes. It can work for a few hours but soon goes back to sleep mode instead of the lock screen slideshow!
I've triple checked the settings, uninstalled and reinstalled the slideshow, changed the image folder etc.
I've even changed and re-changed the NoLockScreen setting in the registry.
I am currently up to date with all updates for my legal copy of windows 10 pro, I have choosen the windows spotlight feature for my lock screen, however it never activates, I still just get the microsoft glowing blue window screen, any thoughts?
also right below the options for lock screen are options to choose apps for detailed status and apps for quick status, I have also never seen these work anywhere
After upgrading to win 10 from win 7 HP the screen locks up for (approx 4 seconds) after every mouse click. i have just reinstalled win 7 and everything is fine again should i re-download? and can i make a bootable ISO from the ESD file to do a clean install?
I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?
My mouse and keyboard (both are USB) don't work, but they are lit up. I tried replugging them, but that doesn't work. I tried using F8, but that doesn't work. I also don't have a PS/2 port, as I am running BootCamp on a Mac. I even tried using the Apple Keyboard.
Before this problem, I had issues with BAD_POOL_HEADER (BSoD) on Windows 10 after updating drivers. Checking if I had any system restores, it didn't have any that I made before the update. So, I reset my computer, with all files intact. Then my problem arises; keyboard and mouse do not work, and I'm pretty much stuck on the login screen.
I've recently setup a secondary monitor, but the mouse simply wont lock into the screen where the game is being played (total war) and if i do end up clicking somewhere on the secondary monitor the game will be minimized which is bothersome, I have tried borderless and fullscreen but in vain.
Another issue I've had is that the secondary screen (1600x900) gets some flicker/lines whenever i use vga to connect it, but it works superb with dvi, why?
Now another thing is that when i move the mouse/cursor from the top right corner of the main monitor(1920x1080) it wont switch over to the secondary one(my idea being that the res/size is different).
I was doing a factory reset on my Windows 10 computer, but it got stuck on 2%. After less than an hour from the beginning it got stuck, and it didn't move all night, although I selected the shorter method (deleting only personal stuff). I manually shut down my PC and I selected the second method. It said it could take few hours. But after half an hour it was still on 1 %. I have just one hdd disk. What could be the problem causing this? I am worried that when I will come back from work, it will still be on 1%.
I downloaded Windows 10 a few days ago, and every time I turn off my computer and log back in, my mouse settings revert back to their defaults. The defaults have a lot of annoying extra features, and the scroll is backwards. Every time I change the mouse settings to my preferences and apply them, on the next restart they are back to defaults.
How to make my settings permanent? I'm sure once a patch or two for Windows 10 comes in the problem will sort itself out, but in the meantime?
So something weird happened the other day and my mouse would not click certain buttons on chrome, windows it self and a few other things. other things would click just fine. I restarted my computer and nothing changed. Reset cmos and low and behold it worked. and now it keeps redoing it over and over.
