how to solve this error, I have an asus p8z77-v lk mother board and an intel i7 32 bit processor. Windows10 seems to complete the installation then exits with the error "Does not support the processor configuration. error # '0xc1900101-0x30017' It then reverts back to win7.
View 1 Replies
Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 RepliesWhen running the tech preview, i cant get any programs to control the speed on my fan. I am using a fan on my heatsink, that i can control via AI Suite II on Windows 8.1. But on W10 TP i get an error message saying something about an access violation when i try to open Fan Xpert 2.
I have tried Speed Fan (the newest version with W10 support) but no luck. Its really annoying having to listen to the fan spin up all the time, i can't stand it.
I received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 RepliesStill trying to update to windows 10. Have updated windows 7 w/sp1 and have checked that my computer is ready for update 10. Everything goes great until final shut-down and restart.Then I get black screen with Blue Flag and locks up, will not go any further. After 5 hours of waiting tried turning off and it restarted and gave this error message: Instalation failed in the safe OS phase with error during Boot. 0xC1900101-0x20017
View 3 RepliesThe upgrade process seems to go on Ok, but, near the end I see this message:
"The drive where Windows is installed is locked. Unlock the drive and try again.
"Errors 0xC1900101-0x20017
"The installation failed in the SAFE_OS phase with an error during BOOT operation.
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
I have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
Download of the installer fails 3 times with error 80240020 on Windows Update
System on Pc is Windows 7 Starter with update SP1 .Enough Ram 2G
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesWindows 10 goes through the entire download/installation process, restarts, blue screens with a "system thread exception not handled (iastora.sys). It then restarts and shows this error for windows 10. Am I screwed? It goes back to the desktop and works somewhat (other than windows 8.1 bugs). I don't have any files on this computer that I need to keep. I just want it fixed!
View 1 RepliesI'm trying to upgrade a Lenovo U410 to Windows 10, but I keep receiving this error:
0xC1900101 - 0x40017.
What this may be?
I've been having a problem with upgrading to Windows 10. I've tried using the tool both by running it on my PC and putting it on a USB. It gets through the first part of copying files and does the first reboot, then it starts back to the screen and the Installing Features and Drivers sits at 0% for a few seconds then resets and restores my old version with this error:
0xC1900101 - 0x30018 - The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.
When I originally looked this error up I read that it might be an encryption error so I decrypted both of my drives, ran the install again.. Same error. So now I am at a complete loss as to what to do so I can get myself upgraded.
System:
Windows 8.1 Pro x64
Mobo: ASUS ROG Maximus VII Hero
PCU: Intel i7 4790k 4.00 GHz
GPU: ASUS ROG MARS760x2 (2 GTX 760 chips on one card)
RAM: 16GB DDR3
I have Win 10 installed and activated on one computer - Asus z97 Deluxe/USB 3.1 mobo - but it ABSOLUTELY refuses to install on another computer - EVGA z97 Classified mobo. Regardless of the method - and I have tried all I know of - I ALWAYS get the same message: "Installation failed 0xC1900101 - 0x20017 The installation failed in the SAFE_OS phase with an error during Boot Operation".
All bootable win 10 USBs and DVDs refuse to boot. Out of desperation I even purchased Win 10 Home (which means I simply purchased a too expensive key. I was extremely disappointed that no different software came with with the purchase. Some of the solutions I have found are so difficult I might have been able to write a C++ program that would be much simpler.
I download windows 10 pro 64bit ISO file and extracted to pen drive pc restart and loaded windows 10 setup format Disk C give the install windows after its goes 100% all done pc restarted after screen black nothing happening.
0xC1900101-0x200C
The installation failed in the SAFE-OS phase with an error during APPLY-IMAGE operation
My Pc Information
1Gb Vga Card
4Gb Ram
I3 Processor
500Gb Hard
The other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. T
View 2 RepliesI guess the title says what my problem is. So, I finaly got to install KB3081444 without any issues, and now, this update is doing infinite restarts on Windows Update. I tried:
1. Installing from offline downloaded installer - the same error code.
2. Did DISM, both commands failed.
3. SFC says no issues.
Windows Update files will be shortly.
I attempted to update my desktop with Windows 10 x64 build 10240 to 10586 using the ISO. The update gets as far as the second section and stalls at 32% - I left it for hours with no change. Fortunately powering off the system resulted in 10240 being restored. After the system booted to the desktop the error 0x1900101-0x30018 was given as the reason for the update failure. I'm not sure how to proceed. I've been able to install all other updates since the release of 10240 and the system has no issues with hardware or drivers as far as I can tell. I also have a laptop running identical security software and it updated to 10586 without incident.
View 2 RepliesNVIDIA driver update for NVIDIA GeForce GT 620 fails to update in Windows 10 - Error 0x80070002 - After upgrading, I lost my 2nd monitor.
View 2 RepliesI received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
I had upgraded from W8.1 and Windows 10 was activated. I was under the impression that I didn't need a product key and that my PC would be recognized after doing a clean install. Now I have W10 installed fresh, but get the error code: Error code: 0xC004C003
View 9 RepliesMastercook 15 not Compatible Windows 10 ver 1511 bld 10586.11 ... Since update Mastercook 15 fails to print. Windows error and program shuts down. Contacted Mastercook support and this is apparently a windows compatibility problem now. Note when using Mastercook 11 when trying to print receive error can't locate print drivers.
View 4 RepliesI bought an asus tranformerbook t200(with windows 10 update) on 11 august and was very happy with it.
Occasionally, the laptop couldnt find any wifi networks but that was fixed quickly by just turning the computer on and off, until today.
Today at school(my second school day at university), i had no internet anymore. He didnt find any networks anymore at all. Turning the laptop on and off wouldnt so a thing. So i tried some things, like turning the broadcom device on and off via device manager. That also didnt work. A user in the internet on another topic suggested to delete the broadcom and then reboot, i did it and things only got worse. My laptop didnt recognize the broadcom wifi adapter anymore at all.
Then I tried to format windows(with saving documents addition) which unfortunately failed. After that, i tried to format it and added the option that everything would be cleaned, that failed also. c windows system32 logfiles srt srttrail.txt is apparently the error.
Now if i start the laptop, the asus logo will show but thereafter the screen just turns black. I tried system recovery and even startup repair but both fail.
Some weeks ago I upgraded my son's Zenbook. Initially it seemed to work fine. So I did a clean install. I can vaguely remember an odd miss start-up after the clean install.It seemed to work allright after that. Anyway my son skyped a couple of weeks ago to say it isn't working. Generally speaking, can I fresh install the original W7, it was home premium. I haven't a disk and wonder if there are any ISO's available at MS for download?
View 5 RepliesI am using build 10130 NL, today I got update to build 10240. After the update I have the problem "Missing operating system" . I am using a ASUS X77J series laptop with SSD drive.
View 9 RepliesI have an Asus N73J Laptop running Windows 8.1. I have attempted (numerous times) to install Windows 10 but it always errors at about 32% completion with the BSOD - Page Fault in Nonpaged Area (Portcls.sys). I have noted and tried almost all of the fixes others have had success with but alas, I am frustrated and disappointed by the continued troubles I am having. I am assuming that the problems stem from failed driver updates (see attached jpg) but I have been unable to correct this situation.I tried to insert the setupact log file but unfortunately it is too large for download.
View 3 Replies
