Black Screen With Mouse?
Dec 3, 2015i've just upgrade to windows 10 nd am facing black screen with cursor
View 4 Repliesi've just upgrade to windows 10 nd am facing black screen with cursor
View 4 RepliesI upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 RepliesWhile using PowerPlanner7, I believe I may have accidentally turned off display or brightness to 0. I am unsure if I successfully made it back to the desktop after rebooting(my attempt to solve the problem). I have tried searching the Internet for shortcuts that re-enable screen or turn brightness up(my keyboard brightness buttons do not work since I am on Mac and the functions keys are all remapped- holding fn then function is same as just pressing function now too)
View 5 RepliesI upgraded a desktop computer from Windows 7 ultimate to Windows 10 and there seems to be an annoying black screen issue which happens before the login screen.
After the Windows loading logo, the screen stays black for about 60-80 seconds (and all I can see is the mouse cursor). After 60-80 seconds, the login screen pops up and everything works fine and I can login.
I already tried the following:
- Updated NVIDIA drivers
- Completely removed NVIDIA drivers to see if it was a drivers problem
- Booted into safe mode, still happens
- Checked event viewer, nothing weird in the logs
- Made the PCIE slot the default slot for the primary monitor in the BIOS
- Ran the sfc /scannow command, no violations found
- Ran all Windows updates
- Took a look at the services and startup processes, nothing weird here
- Turned fast boot off/on, no change
- Full Malwarebytes scan, no infections found
I ran a xbootmgr trace log, here's the summary XML file: processSummary numProces - Pastebin.com
I'd like to keep the fresh installation option as a last resort.
Afther installing the intel chipset driver the pc crashed showed a blue screen with large tex saying that the pc run into a problem and is collecting data. Then it turned off and started booting went past the windows booting logo and than showed a black screen with a mouse pointer that constantly changes between loading and busy... you can move the mouse pointer on the black screen and nothing else... I can't boot the laptop and I don't know what to do
View 1 Repliesi upgraded my windows from 8.1 to 10.evrything seems fine but when i launch my games it won't run.i run dxdiag then i noticed that my intel vga and nvidia 840M's driver were uninstalled. I open the ASUS installer and installed my display driver.when i reboot, the screen goes black with the mouse cursor in it after ASUS logo.3 leds were lit.the hdd led is blinking. i reboot several times and hit F8, unfortunately nothing happened.
View 1 RepliesSo I recently gave my laptop an update today. It was fine before but...now it boots to a black screen with just a mouse pointer visible. What should i do?
View 1 RepliesInstalled Windows 10 on HP Pavillion p7-1262 about 2 weeks ago. Worked fine up until last Friday, screen went black, no keyboard entry, no mouse cursor. Can't enter BIOS. Whats wrong?
View 3 RepliesI did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replieswin10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 RepliesOkay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
View 1 RepliesEvery so often, more often when I'm watching a video on the internet, the mouse and screen freeze.
I'm using a Dell Inspiron 15-7559 with Windows 10
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
Recently there was an update from windows on windows 8. A problem came about when i realized that every time I spectate in a game or watch some TV series, the graphics starts to lag and becomes jerky. I thought it may be a problem with OS so i upgraded it to windows 10, but the problem still exists.
View 4 RepliesMy Laptop is Lenovo Y50. All of a sudden , on logging, the screen went blank with a mouse pointer & i couldnt enter password. No Control, alt, Del works. I didnt do any Windows 10 Update. Now the laptop is as good as dead. Only i have to reinstall the OS? There is no other option?
View 3 RepliesWhen I start up a game or even sometimes Chrome. It will start to flicker and say that its not responding really quick, about a second. Then at some points it will start flickering constantly really fast.
View 1 RepliesI currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only show a blank screen with only a mouse icon visible.
I have tried various Windows supplied options with the following outputs:
1. Boot into safe mode (with and without network) - this again only loads to a blank screen with only mouse icon visible
2. Window reset - appears to get stuck on 8% - only to show an error saying reset could not happen, reverting changes (option to reset with files saved was chosen - as current files are required)
3. Start Up Repair - issue not resolved
4. System Restore and System Image Recovery - N/A as Windows cannot find previous image or restore point
5. Booted in Low-Resolution video - again same
I recently upgraded to Windows 10 from Windows 7. Since the upgrade I have noticed the following:
When my computer comes alive from screen saver mode, sometimes though not always all the icons are missing. The task bar is there but clicking on any item there does nothing. It's like everything just seizes up.
I recently tried windows 10... didnt like it. Did the recall back to windows 7 option. Let it do its thing. Came back and my computer was trying to rapair itself... said could not reboot windows is checking for a solution.. I let it go.. it said no solution found. And just turned off..So I restarted spammed f8. Tried to start in safemode.
Got to password screen and mouse and keyboard won't work...So I restart, spam f8 again. I select repair windows this time, cancel the repair process then clicm.advanced options. Try to look at restore points... and it says none exist... that is bs. I did restore points twice a week. when. I try to start normally it loads her goes to a blue screen with tons of writing and letters and errorrs but no time to read any...
i just formatted my pc. I got the following screen; URL... My mouse and keyboard are not working eventhough there is a light burning in my mouse
View 1 RepliesAfter log on I get black screen,I can get into task manager.Is there a way to restart computer in safe mode from task manager new task?
View 1 Repliesthe last two times I have been getting a black screen it says to close other programs but I cant do it?
View 3 RepliesI know there is others who have this issue of the flashing blue working circle next to the mouse pointer on the screen. I have read through he forums and tried what I could find but so far no luck getting rid of it.
I upgraded from Windows 7 to 10 - on my Asus sonicmaster laptop and now the flashing blue circle constantly shows up in and on and off state. Like it is trying to load or check something. How to get rid of this?
With Windows 8.1 either mouse button could be used at the login screen to select a user account for login. In Windows 10 it seems that only the left mouse button can be used at the login screen. With kids, some of whom are left-handed and use the mouse left-handed, this is confusing, as they click on their user name but nothing happens. Once they login the mouse buttons work as they expect, but for the left-handed ones, the mouse doesn't work as they expect at the login screen. The previous Windows 8.1 behaviour was preferable.
View 4 Replies