I tried to boot into safe mode via msconfig then after restarts it showed BAD_POOL_HEADER and PAGE_FAULT_IN_NONPAGED_AREA. I've tried chkdsk and system recover. I don't want to Reset my laptop. S
View 1 Replies
Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
I knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.
View 2 RepliesI can boot up my PC but then anything I do results in non responding screens so cant get into safe mode from there.
Anything involving restart caudse hanging on 'restarting'
Is there another way?
Is there a way to boot into Win 10 in a safe mode? The reason I ask is I am having trouble in normal mode trying to get rid of my win.old file. It will let me delete some of it but not all. So maybe in safe mode I can delete it all or am I missing something here?
View 6 RepliesI recently installed Windows 10 from 8.1 on my HP pavilion laptop (I got it just over a year ago, not sure the exact model). All I did was go through the free upgrade process.
Everything seemed to work fine in the first 24 hours, but now I encounter a blue screen with grey lines when I try to boot. Eventually, after a few attempts (on its own) at rebooting, I get to the repair/restore screen. System restore hasn't worked in the few times I've attempted it, and I can only boot up in safe mode without networking.
I have no media disc for Windows 10 or anything like that, and I'm relatively inept in programming.
In order to force a safe mode start in Widows 10, I used the msconfig command in the Run Box. I clicked the "networking" radio button; unfortunately, that UNCLICKED the "minimal" radio button. Now I am unable to boot into anything. I have created a Repair / Recovery Disc from a similar PC, but it does not work with my HP ENVY.
View 10 RepliesUpon attempting to perform a fresh install of my display drivers using DDU, I somehow managed to permanently blue screen Windows 10 (Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED). So every time I try to boot into my OS, I get a constant blue screen of death, resulting in my computer to continuously restart and blue screen.
So now I'm trying to boot into safe mode from a cold boot, is there a way that I can access Advanced Options without requiring to boot into the OS itself?I'd like to create a recovery disk with a flashdrive, but I do not have an alternate computer that runs Windows 10, just a MacBook Pro
My PC blue screened on windows 10 and does so whenever it boots up. I have tried booting it in safe mode but when I do it just blue screens again.
View 1 RepliesEvery time I try to boot into safe mode or advanced options I get the same BSOD ERROR: CRITICAL_PROCESS_DIED.. Is there any other way for me to accomplish this?
View 1 RepliesHp compaq running win 10 was running fine, but now won't load windows or even safe mode. I do get a blue screen message sometimes that reads BAD SYSTEM CONFIG ...
There was a storm and she said the machine froze also the HD is a Seagate and of course no backup ...
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 RepliesIn my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
I can't make it Windows 10....
View 6 Replies1. If I try to select normal startup in msconfig.exe, it doesn't stick; always reverts to selective startup.
2. When I boot to the Windows 10 desktop, it always opens a Windows Explorer window at /windows/system/ which shows only a Speech folder in the right panel.
3. Checking my BootManager using BCDEdit, I see this but I don't understand what the entries mean or whether any of them are connected to the problems 1 and/or 2:
Code:
C:Windowssystem32>bcdeditWindows Boot Manager--------------------identifier {bootmgr}
device partition=C:description Windows Boot Managerlocale en-USinherit {globalsettings}
default {current}resumeobject {657a150b-658d-11e5-99b6-8e17c296bef1}
displayorder {current}toolsdisplayorder {memdiag}timeout 30Windows Boot Loader
[Code]....
Due to there not being an F8 boot command screen any more I had to go into msconfig to change how the computer starts up.. which is now set to safe mode. So I'm in safe mode (on the other computer).. the problem is I cannot figure out how to reset it to start up in normal mode. The 'search windows' box at the bottom will not allow any text to be entered.. unless I can get to msconfig by looking for it in safe mode.. I'm stuck in safe mode. How to get to msconfig in safe mode without typing it in? again the msconfig was changed to have the computer start up in safe mode.. it's now doing it every time.. even after a system restore to 4 days ago.
View 2 RepliesI put my PC in safe mode but when I try to get out I can't I press the windows key and the R and then put msconfig. A window opens but it closes right after.
View 6 RepliesI have a MSI board and cant seem to find how to run windows 10 in safe mode
View 1 RepliesI was having difficulty with flashing and went into safe mode to try to figure out which program was causing it but now whenever I reboot I am still in Safe Mode.
View 8 Replieshow it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...
View 6 RepliesI'm using Windows 8.1 and know how to get into safe mode on that operating system.
However, my friend has Windows 10 Home Edition and I've never had exposure to it in the past.
How does one get into Safe Mode?
Also, how can you get the toolbar back on the page as like Windows 7 and Windows 8.1?
In Windows 8.1 it was very simple and straight forward, but Windows 10, different ball game all together.
Needed to boot in safe mode, used msconfig to set the boot mode. Of course I was not aware my pen number login is wothless so now I am stuck in perpetual safe login screen. My outlook password is in a program on the system which I cannot access.
Tried shift restart and tried startup settings and press enter, but this does not do a normal boot, just another safe mode. Where is the option for normal boot!?
I work in an education environment and these kids are very savvy. They have figured out how to put the computer in Safe Mode and make it impossible for me to track them. how to Disable Safe Mode?
View 5 RepliesI want to boot into safe mode but every time I try it crashes and shows BSOD Bad_Pool_Header. I've tried to boot it manually through system config. It still won't work.
View 1 RepliesMy laptop was windows 7 and I have upgraded to windows 10. Over the past few weeks i've seen that some updates have failed, and I was going to try the product on this site , windows all in one, to try and find out the problem. so i followed the instructions for powering off, unplugging and removing battery to drain electricity, and then rebooted to "safe" level...and then.....i can't login from safe mode, it says password is incorrect, and i am unable to get OUT of safe level to sign in the regular way.
View 4 RepliesSo, to log into your computer you have now to enter a PIN instead of a password, right? Well, that PIN is changed (or something similar) because I can't log in with the normal one.
View 7 Replies
