Cannot Send / Mail Created Hallmark Cards
Oct 31, 2015I cannot send/mail created hallmark cards because my OS i
View 3 Replies
Similar Messages:
MAIL App Does Not Send Photos
Jan 13, 2016I'm using Hotmail for my e-mails. The Windows 10 Mail app has already been synched and I am able to send and receive e-mails. Now I'm able to receive photo attachments in these e-mails but when I try to send any attached photos they do not go through. If I access Hotmail directly I can send photos but not with Windows 10 MAIL.
View 4 RepliesLive Mail - Cannot Receive But Can Send
Aug 13, 2015Looking for settings for POP. Can send but cannot receive.
View 17 RepliesBrowser/Email :: Outlook Cannot Send Mail
Jul 31, 2015I did the windows 10 upgrade yesterday and since then my Outlook 2010 cannot send mail. It receives mail as it should without any issues. I have multiple emails accounts with different vendors and it is doing the same on all of them so I have ruled out it being a hosting issue.I have also disabled all my internet security and firewall but that did not work at all?
View 9 RepliesBrowser/Email :: Cannot Send Mail After Upgrade
Dec 5, 2015Yesterday I installed the win10 "November major upgrade" to my Win10 system. I upgraded to Win10 couple of months ago from Win7. There were some problems then but I managed to fix them. After yesterday's upgrade some of the problems reappeared. I had hard time to recall HOW I fixed it couple of months ago, but this one I just cannot get over:
When trying to send mail from Outlook 2007, this error appears: :Error 452.4.1.0 Policy violation . Your host xxx.xxx.xxx.xxx has no valid reverse DNS.: and mail resides in the "to be sent" folder. No need to say that before upgrade all worked OK and that this cannot be real error, because I can send mails from the same LAN via other devices. It seems that the upgrade changed something. The inability to send e-mail costs me lot of money and I need this to be solved asap.
Browser/Email :: Cannot Send Message From Mail App
Sep 17, 2015I have just upgraded to Windows 10 and want to use the Mail app. I got it set up and it will receive but not send: I get this error message in my Inbox - "We weren't able to send this message, so we've put it in your Drafts folder. Before you try sending it again, you can check to see if the address is correct and that no attachments are too large". Obviously I've done those checks, I've run an sfc scan as advised in one of the forums, an adviser at my ISP has confirmed that the settings are correct ...
View 6 RepliesSend To Multiple Recipients In Windows Mail
Oct 23, 2015Is this possible? I believe it was in Windows 8. Does not seem to be in 10. Is there an add on app to do it?
View 1 RepliesHow To Send Email From Primary Mail Account
Aug 5, 2015With the new W10 email client, either with my main account or a second Outlook account, it always picks a random alias for the 'From' address when creating a new email. In the web mail settings I have each account set to send from its primary address and W8 PCs Windows mail clients have an option to choose the used email address.
Where is the setting in W10 and how do I get this under control? This can't be an issue for most as the forums would be full of it. What am I messing up here? The email app is currently useless to me.
Can't Send Email Either With Windows Live Mail Or Thunderbird
Jul 30, 2015I cannot send emails from my laptop either with windows live mail or thunderbird all setting have been checked and rechecked I can send emails if I use the build in mail app and my outlook account I can also send emails via webmail it's just as if something is blocking outgoing mail ! Each time I try I just find the email sitting in the outbox and a error message saying unable to send or in the case of thunder bird just get the green line showing progress and it just sits there.
View 1 RepliesBrowser/Email :: No (send To Mail Recipient) Context Sub-menu?
Aug 13, 2015I do have the "Send to" context menu entry in windows explorer but there's only Bluetooth Device listed (and I even have this turned off, go figure). There is no E-Mail Recipient like it used to in my previous Windows installation.
I've tried the 7/8 Forums recommendations but my "Send to" folders in Default and User already contain the MAPI entry. I even deleted it and re-did it according to the tutorial but to no avail.
There's a fix it EXE available from some forum that fixes some Reg Entries but it was for Vista and does not work for Win10.
Send To Option Not Recognizing Mail As Default Email Program Even When Set As Such
Jan 7, 2016Unable to resize a batch of photos using the built-in Windows 10 resize feature with the Send To option:
1. Open a folder containing photos.
2. Select some photos.
3. Right-click selected photos and choose "Send to."
4. Click on "Mail Recipient" in the listed options in the pop-out menu.
5. Notice that the "Attach Files" dialogue box displays.
6. From the drop-down menu, I selected "Smaller: 640 x 480"
7. An estimate of the new total file size is given... press the Attach button.
8. Notice that the progress of the file re-size operation displays, "Preparing to send."
Receive error message, "There is no email program associated to perform the requested action..."
Not true, I went into the Control Panel and associated the Windows 10 Mail program as the default email program. Please see attached screen shots as verification/clarification. Is there something I am missing? I am using Windows 10 Pro.
Browser/Email :: Send To Mail Recipient Function Has Stopped Working - Explorer Window Closes
Sep 10, 2015At some point in the last couple of weeks the Send To/Mail Recipient function has stopped working. When I select a file and do the send to, Windows starts thinking, the explorer window that I have selected this from stops taking input and then eventually, with no error messages, the explorer window closes and desktop explorer resets.
My Default mail client is Outlook 2013 (15.0.4745.1000)
(send) Command On Word Requires Use Of Microsoft Exchange To Send As Email
Sep 8, 2015Having changed from windows 7 to windows 10 MS word now requires one to log into Microsoft Exchange to obtain address book MS exchange apparently is now required (at a PRICE) to send an E mails direct from MS word.
View 1 RepliesNew Folder Created Not Accessible
Sep 13, 2015I discovered today that the new pictures folder that was created when the Windows 10 upgrade was done is not accessible to me and I am the only User and I am the administrator of the PC. When I open the security tab of folder properties it shows that I have all permissions but I still can't access the folder...
View 8 RepliesBootable USB Drive Could Not Be Created
Aug 29, 2015When I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
Installation :: Partitions Created During Upgrade?
Aug 20, 2015my question is about Partitions in Windows 10.
I have three-
100MB (created from Windows 7, which I knew was needed for booting)
C Partition (Windows instllation)
450MB (created after upgrade)
So, do I still need the 100MB? and what is this new 450MB used for? Disk Management says that is empty. I don't want to delete anything for risk of making my system unbootable.
Customization :: Themes Can't Be Edited / New Created
Nov 11, 2015So, i wanted to change my game of thrones theme since i found a new love for CS: GO. but the lower balk is missing (screenshot of windows 7). I'm not familiar with windows 10 customization yet. How do i edit my theme?
View 3 RepliesCan 64 Bit Boot Disc Be Created On 32 Bit System
Aug 19, 2015I have a windows 10 64 bit computer which was upgraded from windows 7. I tried to do a restore but it came up saying unable to complete. Since then I have been unable to boot to windows. HP screen comes on and I am able to access Bios and Boot menu but that's where it stops. HP diagnostic tool at start says everything passes. I wanted to try booting from disc. I have another machine but its running windows 10 32 bit. Any way of creating a 64 bit boot disc from my 32 bit machine.
View 9 RepliesJust Created A System Image To Disc
Sep 15, 2015I have just created a system image to disc, and I would like to know how I go about verifying that the disc is working. When I say disk it took 5 hrs and 19 disc's to finish.
View 3 RepliesFile Explorer Does Not See Just Created Documents
Sep 16, 2015I have just upgraded to Win 10 about a week ago. Several times I have looked for recently created documents and could not find them right away. They eventually appeared but they should be there right away.
Example: I saved a docx file and then saved it as a PDF document, but neither file appeared in the folder I saved them to when I wanted to attach it to an email (did not see it in the Mail app client attachment dialog, nor in File Explorer, nor in my business's email web site attach file dialog box). I had the document still open, so I saved it again, in a different folder and then saved a new PDF. Still unable to find it to add it to the email. Eventually, the files both showed up but I had to wait about 10 minutes (I think).
Created A Boot Disc Using MCT For Installing On New SSD
Aug 5, 2015I have an Acer PC which was running an OEM version of Windows 7 SP1. I upgraded to Win10 using the regular upgrade process, and then created a boot disc using the MCT for installing on my new SSD. All went well, I was activated so I wrote down the Product ID (which I thought was my Product Key) and installed my new SSD. Installed Windows again, but in the process accidentally formatted the original HDD, which I wasn't concerned about because I had backed up my personal files and was looking for a clean install regardless.
Now I have 10 installed and running fine on my SSD, but it won't activate. I don't have the original successful install on an HDD anymore, and my OEM Windows 7 copy isn't available to recover to anymore either. I guess if the only option is rolling back to 7 and starting this all from scratch, how do I go about that, assuming I only have a Windows 7 .iso from the internet?
Installation :: 4 Partitions Created During Clean Install?
Dec 24, 2015As the title say, is there any workaround to avoid creating 4 different partitions during a clean install of Windows 10?
Here is a sample of what I mean:
[URL] ....
I think one is necessary and unavoidable (the MSR one), but the other ones should be used for optional services that you may not require, like restore etc.
I couldn't find a work around yesterday and in the end I gave up and accepted those 4 partitions...
Manually Created Folders On C Drive Are Read-only
Aug 11, 2015I was just creating a folder on my C drive (SSD) when I noticed that the attribute is set to read-only. I've tried clearing the attribute many ways using the link below but to no avail. Right-clicking on the folder does not show the option to Take Ownership. how to correct it?
Remove read-only attribute from folder - Windows 8.1
Networking :: How To Delete Homegroup Created On Old Computer
Dec 29, 2015the homegroup showing was created on an old computer no longer around. After the recent large Win 10 update my two computers cannot see each other. I have a Netgear router an Net Genie can see the the computers on ethernet network but shows them as unavailable. My internet connection is working on both computers.
View 1 RepliesBrowser/Email :: Outlook OST Files Being Created Instead Of PST
Dec 20, 2015I upgraded to Win10/Office 2016 from Win7/Office 2013. At the same time, I changed my web mail (Gmail) from POP3 to IMAP. Since the upgrade, Outlook creates *.ost data files instead of *.pst data files.
As far as I am able to determine, *.ost files are a product of or are otherwise related to an Exchange server, with which I am not associated., i.e., I am using my home custom PC. I also log in to Win10 with a local (vs. Microsoft) account. In Outlook, Work Offline in Send/Receive preferences is grayed out and red Xed; the Outlook icon in the task bar is also red Xed.
All of my searches about this issue relate it to Outlook behavior with an Exchange server. Not being on an Exchange server, I can find no solutions. When I first set up Win10, I logged on using a MS account but no longer do so. Nevertheless, I am wondering if I am tied to MS servers.
My question: however I accomplish it, how do I tweak Outlook to create *.pst data files instead of the *.ost data files.
Upgrade Created Protected System Drive
Aug 20, 2015Got caught by this sneaky Windows 10 downloading to my laptop. This download created a new partition on my harddrive as a protected system drive. I have tried to take ownership of this new partition with no success, I have tried to restore to a previous date with no success - it fails. How I can remove this partition from my hdd?
View 1 Replies