Display Screen Goes Completely Black For A Couple Of Seconds
Oct 24, 2015
My mother has a HP Touchsmart 600 that I upgraded from Windows 7 to Windows 10. Windows 10 works fine on there, once it finally boots up. I've noticed this scenario. Power Button to turn on computerBIOS DisplaysWindows 10 logo displaysscreen goes completely black for a couple of seconds Screen comes back on, stays dark/gray and I can see my mouse pointer and it moves. The boot process hangs here for several minutes, usually and most of the time, the computer doesn't even go past this point.EVENTUALLY, after several minutes, Windows 10 finally gets to the login screen, if it is going to login.
View 6 Replies
Similar Messages:
Aug 30, 2015
When starting up the screen seems to reboot. windows menus/ bottom menu and program icons mostly dissapear and re-appear.
In the mean time windows is practically unusable. Hard to start up any program.
No error messages appear on screen.
View 19 Replies
Aug 12, 2015
I'm using Windows 10 and I changed all of my When Computer Sleeps settings and my screen still goes black after about 30 seconds of inactivity. Not really sure why this happens because I changed all of the settings for the screen shutting off to never.
View 6 Replies
Jul 31, 2015
I just installed Windows 10, but every time I start up the computer, it will show a black screen before getting to the login screen and then the computer will restart by itself after about 5 seconds.
It does this over and over again.
Some things I've tried:
- I have multiple monitors, so I tried disabling the other in BIOS. Didn't work.
- I tried booting from the integrated GPU rather than my NVidia GPU. Didn't work.
- I unplugged my second monitor. Didn't work.
- I updated my NVidia driver through safe mode. Didn't work.
View 4 Replies
Jun 23, 2015
I had the Windows 10 DEV mode, battery died and only had three icons on the screen when it came back on. Tried to press the power button to have the screen turn off, and then it became completely unresponsive. Tried to do a soft reset, made it start vibrating repeatedly and had an entirely black screen or would just continuously restart after the AT&T symbol. Then after that, the screen stopped restarting and gave short repetitive vibrates. Soft reset and hard reset don't work.
View 1 Replies
Mar 30, 2016
I have Windows 10..Just recently I have found that when I open a folder on my desktop which opens in maximized mode, and then go ahead and click to restore the window to a smaller size, instead of doing so, the window restores to the width of the three buttons at the top (minimize, restore, close) and then the file explorer window crashes and freezes for a few seconds, my screen goes black for a few seconds, then I am returned to the desktop, where the window has closed.Is this a sign of hard drive corruption?
View 1 Replies
Aug 5, 2015
While using PowerPlanner7, I believe I may have accidentally turned off display or brightness to 0. I am unsure if I successfully made it back to the desktop after rebooting(my attempt to solve the problem). I have tried searching the Internet for shortcuts that re-enable screen or turn brightness up(my keyboard brightness buttons do not work since I am on Mac and the functions keys are all remapped- holding fn then function is same as just pressing function now too)
View 5 Replies
Dec 30, 2015
I every now and then, but lately too often, get a pop up and my screen goes black..that the intel graphics display was not working but has been restored..then after 20 seconds or so the screen comes back on...BUT, it mentions for Windows 8..I have a new PC with windows 10.
View 1 Replies
Dec 3, 2015
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 Replies
Mar 21, 2016
3 weeks before my AIO Desktop while trying to reset gave a WDF_violation error after that my display went completely blank. I visited service Centre he told me to replace my Mobo, so I did and got my PC today working but the service rep told me to roll back to Windows 8 since 10 had lot of issues. So while resetting my PC again it terminated and gave a WDF_VIOLATION again and after that my display went blank again. Note both the times after resetting this thing happened.
View 4 Replies
Aug 7, 2015
As the title says, I can't set the bg image in windows 10, at first it worked perfectly but after a couple of days i cannot set a bg image, if i set any photo as the bg its just a black bg.
Asus VivoBook R553LN
intel core i5 4210U
nvidia GeForce 840m
View 1 Replies
Jul 31, 2015
Tried msconfig with no initialization GUI but no success. Windows10
View 2 Replies
Aug 11, 2015
Bought an Asus X550Z-WB11 off of Amazon, started it up, immediately upgraded to Win 10, and I'm getting issues with my screen.
If I let it fall asleep for say, ten minutes, then wake it up, it boots up normally, I see the screen for a moment, and then the screen turns of again and no button pressing turns or waiting turns it back on.
Sometimes I can get it to turn back on after it putting it to sleep then waking it up a few times; when I get a success the back light turns on and blinks several times, and then the screen turns on and blinks a few times before stabilizing.
If I turn it off and on, the screen usually turns on with no problem.
The first time I restarted my laptop, it told me there was an error and it fixed it, but the screen still blinks and I haven't gotten that message again.
The way it blinks reminds me of having a faulty composite connection and having to wiggle it around into the right position, but no angling of the screen, tilting of the laptop, or light tap anywhere had any effect.
It's not that black screen issue that everyone else has, the screen is completely off.
The X550Z-WB11 has:
AMD A10 7400p
Readeon R6 7400p
8GB Ram
1TB HDD
View 1 Replies
Dec 5, 2015
Ever since the newest major update, my PC has stopped resuming from sleep. It'll boot up (I think) with the keyboard and mouse lit up but the screen always stays black. Takes a hard reset to get it running at which point the sleep data is gone and wasted. I've had allow hybrid sleep on or off, had USB suspend enabled and disabled, disabled fast boot and hardware fast boot. I changed a lot of settings I thought would be related and nothing. Nothing makes the slightest difference.
View 9 Replies
Aug 4, 2015
Windows 10 installed beautifully and seems to run fast on my Toshiba laptop but the screen flashes every 30 seconds. When it flashes it looks like a small window opens and closes immediately. Any dialogue box open is reset, and there is disk activity. 2 tasks pop up to the top of the list in Task Manager: dwm.exe and explorer.exe. It happens all the time, whether there are any applications open or not.
View 10 Replies
Jun 27, 2015
We just set up a new computer, and from day one, the internet will randomly drop. it wil happen every couple minutes and I have to refresh the computer for the internet to return.
View 1 Replies
Dec 11, 2015
Upgraded from Windows 7. Several pages load or don't load:
1. Control Panel loads but the screen is completely blank.
2. Customizing the font page won't even load. Get message the change font page won't load.
Why I get blank screens. Can't find anything on these problems. Have to work around them at present. Have found a workaround for the Control Panel but not the changing font utility.
View 1 Replies
Dec 8, 2015
I like to turn on my computer then walk away and make my kids lunch etc. When I come back to it I want to be ready to work. Not have to enter a password then wait for it to be done booting up.
View 1 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Aug 6, 2015
After successfully installing Win 10 it ran without any issues for about 1 day then Edge refused to launch, the splash screen opens for about 10 seconds and then disappears. The only change made to Edge was to import bookmarks from IE. Unsure where to start looking for an answer.
View 13 Replies
Sep 1, 2015
So ever since I upgraded to windows 10 I have been getting this constant beeping type noise every couple minutes and I can't get it to stop unless I mute the computer completely. I've checked my notifications are all turned off and the only other thing I can think up is something with my Bluetooth because I know my computer has Bluetooth but for whatever reason right now it does't even show me Bluetooth as an option so I can't turn it off and I know I'm not popular enough to be getting that many emails. This noise, I can't get it to stop!
My other quick question is is there a way to change the default search browser for cortana from bing to google. I hate bing.
View 5 Replies
Feb 10, 2016
I purchased a hp pavilion laptop a few months ago with Windows 10 pre-installed.
I haven't used it for a few days, turned it on this evening and I got a message on boot up saying
"preparing automatic repairs" and then my screen goes blank 3-5 seconds later.
I do not have a cursor and have tried various keys and different ways of trying to bring up some kind of option. I also tried plugging my laptop into my TV to see if it were perhaps the screen that was going wrong.
View 3 Replies
Aug 2, 2015
So I upgraded to Windows 10 and I was using it and shut down my computer. Now my computer turns on but won't load anything. It shows the windows loading screen for about 5 seconds and then goes blank and sits that way till I turn it off and restart.
View 1 Replies
Oct 5, 2015
When i upgraded to windows 10 on my toshiba laptop the display changed from black printing on a white background to blue printing on a black background which i can"t read. my old eyes aren't working so well any more and i would like to switch back to the black on white.
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 10, 2015
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
View 1 Replies