Does Unplug Backup Hard Drive And Replace It With New One Causes System Instability?
Sep 19, 2015
When I built my desktop I plugged a wd green 1tb hard drive so I can copy all of the data from it to my 2 tb green wd
Now I want to unplug that 1tb green hard drive and replace it with a new one? Will that cause system slow? Because windows may thing the drive is still there? No need to clean install again?
I recently purchased a Lenovo 900 ultrabook, and proceeded to upgrade from Windows 10 Home to Windows 10 Pro (using a Windows 7 Ultimate product key). Now that I have done this the factory "restore" does not include my upgrade and I am concerned that I would lose it if I ever needed to restore.
So, I am trying to do a full system image backup to a flash drive, but Windows 10 says that the drive is not allowed for this. I can create the USB drive as a network share and get the backup to work using that method, but I don't really trust that it will work properly.
How to do a full system image backup to a USB drive in Windows 10 that you trust will work in the case a restore is needed?
I am currently running the 358.50 version of GeForce drivers, however there are newer ones available (361.43). For some reason when I tried updating, my system got really unstable and eventually blue screened with KERNEL_SECURITY_CHECK_FAILURE. When I rebooted it was fine, until I tried to use a graphics intensive application (Photoshop) that caused my laptop to switch from Intel HD to NVidia. My computer locked up and crashed again. I booted into safe mode and rolled back the driver, but I need to install that driver eventually as I use this laptop for gaming and Photoshop.Maybe another driver needs to be updated?
I am getting a low disk space message from my system backup drive. It's 1 TB and it is full. There are not any files that I can delete. They are all system files.
Two questions:
1. Why is it so large? 2. Can I install a new larger drive and have it move the system files there?
After spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
I have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10 It' s a custom built pc with: i7 4770k GeForce GTX 770 2GB 8gb RAM 230 gb of SSD (primary drive) with still 70gb of free space 1 Terabyte of Hard disk (secondary drive) 230 gb of external TrekStore drive (NFTS formatted)
I'm having an issue with my system where, while my G430 USB headset is plugged into 1 of the 3(2x2.0 and 1x3.0) USB ports on the front of my case the other 2.0 USB doesn't not seem to work or rather Windows 10 PRO won't recognize my USB key(I've used tried multiple USB keys already). I hate having to disconnect my headset every damn time I'm sitting here waiting for a file to be copied onto my USB!
System: - WINDOWS 10 PRO - R1 ZALMAN (PC case) - MAXIMUS VII RANGER (Motherboard) - I7 4770K (CPU) - KELVIN S24 FRACTAL DESIGN (CPU COOLER) - ASUS R9 270X DirectCU2 TOP 2GB (GPU) ...etc.
I'm getting an alert saying that I need to repair or replace my hard disk and back up my laptop. I've already backed it up. My computer has been having some issues. I thouoght it was something I could fix myself. I had gotten a kernal_data_inpage_error a few time and I thought chkdsk had repaired it then I started to get the hard disk error. Sometimes my computer works fine and sometimes it's practically useless it goes so slow. Since I started getting the hard disk issue my computer has been running smoothly. Smoother then it usually does. What's up with that? I need this for work. Will it hurt anything if I keep using it as long as it's still running and then when it finally does just replace the hard drive? I was thinking about replacing the hard drive anyways to have more space on my computer. Also, could the warning be a false alarm and I might could fix it myself? My laptop is made very weird and the whole stinking paptop has to disassembled to swap out the hard drive unlike my old laptop where you can just unscrew the bottom and bam everything is.
I'm getting an alert saying that I need to repair or replace my hard disk and back up my laptop. I've already backed it up. My computer has been having some issues. I thought it was something I could fix myself. I had gotten a kernal_data_inpage_error a few times and I thought chkdsk had repaired it then I started to get the hard disk error. Sometimes my computer works fine and sometimes it's practically useless it goes so slow. Since I started getting the hard disk issue my computer has been running smoothly. Smoother then it usually does. I need this for work. Will it hurt anything if I keep using it as long as it's still running and then when it finally dies just replace the hard drive? I was thinking about replacing the hard drive anyways to have more space on my computer. Also, could the warning be a false alarm and I might could fix it myself?
I've just built my new PC and am ready to create a system image. However the drive I want to create a system image of is 21gb and I don't have a USB that large. However I do have a hard drive, although that has things on it already so, my question is:Can I put my system image onto a drive that already has things on it or do I need to partition?
I was trying to do a system backup on an external hard drive in windows 10 and once it started i noticed that it was creating a backup for my old Windows 7 64 operating system. How do I get it to back up my current Windows 10 system and all of my files on the C: drive.?
Anyway to do this? I don't use Onedrive at all, i do use Google Drive, i just want to replace that shortcut to lead to google drive instead of onedrive? maybe editing through regedit?
Is it permitted to install the backup image of Windows 10 to a New bigger hard disk in the same PC. After that I will use the new hard disk only and format the old one.
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk. During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
I had updated windows 7 home premium to windows 10 then when the update was complete I created a backup image of the whole system.... and saved in an external HD. then my fixed disk died, replaced by a new fixed HD I can not recover the backed up windows ten image from my external HD ... is that due that when replaced the new HD I am contrived to recover the system with windows 7 home premium and windows 7 do not recognize the backed image of windows 10?
I've not partitioned a hard drive on Windows 8/8.1. In fact, I've never partitioned a hard drive on Windows 7. The last time I partitioned a hard drive was Windows XP to dual-boot two operating systems. I'd like to partition the hard drive on my laptop in order to save a backup of my system onto it, as I don't have an external drive right now. Any detailed, step by step process to partition my hard drive and then back up my system onto it? I have 350GB of free space.
Before I upgrade to Windows 10 on my Windows 7 desktop I'd like to know whether or not there is a built in create a backup system image?
Once my Windows 10 upgrade is running properly and before adding in any new programs I wish to create a backup system image
--- I know I can use a 3rd party program and I am use to Macrium Reflect on my Windows 7 but I wish to know whether or not there is a built in create a backup system image utility
So far I have found which I will do while my Windows upgrade is in pristine condition
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.