Found Corrupt Files But Unable To Fix Some
Nov 7, 2015I went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 RepliesI went into the CBS log as stated by the cmd, and these were the only things I could find that were not fixed.
View 3 RepliesI have run SFC /SCANNOW and a large number of files have been found to be corrupted in Windows 10, and cannot be repaired by SFC. The CBS log is too large to attach, but I have extracted a list of all corrupt files attached.
After looking at similar posts, I downloaded SFCFIX.exe by Sysnative and ran that in an elevated command prompt, but the message I got was that source file could not be found. I have also run SFC in safe mode and also run DISM, but neither solves my problem, and the corrupt files persist.
CBS Extract.txt 27.04KB
just wanted to know what should one do if one gets the error and how does one troubleshoot it properly?
I looked up the log on my system but it's just a really big lump of text.
After scannow, i have : Windows resource protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogsCBSCBS.log.....
what should I do with this ?
Response following sfc scan, windows resource protection found corrupt files, but was unable to fix some of them. I have the CBS log, but don't understand any of it.. I looked at an article that said replace files with a new copy, and I didn't understand that!
Attached Files
sfcdetails.txt 222.12KB
dism.log 348.56KB
Due to corrupt windows files my pc is unable to start. i am able to go into the bios, but after that it will freeze on the windows logo during start up. i have made a usb windows 10 installer and tried to start the pc up using that as my hard drive (went into bios and changed it to use that as my hard drive) but it still freezes on the same screen. I even unplugged my hdd and booted up but the same thing happens so I don't believe the problem is with my hd.
View 1 RepliesI ran sfc /scannow in an admin command prompt, however when it completes I receive this message:
"Windows Resource Protection found corrupt files but was unable to fix some
of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For
example C:WindowsLogsCBSCBS.log. Note that logging is currently not
supported in offline servicing scenarios."
I think that it may be somehow related to a few errors happening on my laptop--such as live tiles not working, and the inability to use some apps without crashes.
Earlier today while playing Dying Light, my PC randomly blue-screened with the error "page fault in nonpaged area cpuz136_x64.sys" - After running a malware scan, nothing was found. After that I cleaned my registry with CCleaner. I haven't played Dying Light since then, but a few minutes ago I decided to run sfc /scannow - and It came up with a few files that were corrupt.
CBS.log:
Spoiler
2015-10-25 17:05:02, Info CBS Session: 30478193_851218210 initialized by client WindowsUpdateAgent, external staging directory: (null)
2015-10-25 17:05:02, Info CBS Failed to internally open package. [HRESULT = 0x800f0805 - CBS_E_INVALID_PACKAGE]
2015-10-25 17:05:02, Info CBS Failed to OpenPackage using worker session [HRESULT = 0x800f0805]
2015-10-25 17:05:02, Info CBS Session: 30478193_851228178 initialized by client WindowsUpdateAgent, external staging directory: (null)
[code]...
After almost every update, if I run sfc it reports corrupt files. Sometimes it cures them, sometimes I have to run dism, and this time neither work.
View 1 RepliesDoes SFC /Scannow really work? It always finds corrupt files in all of my systems regardless of the age of the OS install. Out of curiosity, I installed a pristine Windows 10 Pro on a clean, formatted, erased and empty(?) hard drive with no apps installed on a spare laptop . Ran SFC /Scannow and it reported corrupt files.
View 2 RepliesI have this message at startup of my Windows 10 that I tolerate now since... a few years : Unable to load DLL 'setup_maclook.dll': The specified module could not be found (this is a translation of my french message).
What this is about : I make my Windows updates, I scanned with malwarebytes anti-malware just today, in fact my PC is running really fine, just that there is that annoying message I hope I will resolve someday.
What I did up to now : I did some research, it seems according to bitdefender that this is related to the virus boaxxe. I don't know if I already had boaxxe, but I've already had viruses about one year ago when I was on Windows 8.1, before my upgrade on Windows 10. This is all resolved now.
Other than that, I've passed through the steps of this interesting article : [URL] ....
But I'm not ready to re-install Windows, as I did many tweaks on it to make it lighter (but just recently, so this can't be related to my problem). I did the sfc/scannow thing, I have verified all my drivers using Driverbooster.
I've received 5 files from 5 sources, both Excel and Word. Every time I try to open one I get an error message "File is corrupt and can't be opened." I can work on my own files, but not downloads.
I tried the Windows 10 "workarounds" but these didn't work. I've tried to download using both Firefox and Edge, no difference.
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
As the title says, the start menu wasn't opening so I ran SFC /scannow that found corrupt files but was unable to fix some of them. I then ran RestoreHealth but I got a message saying, "Source file cannot be found". I restart, Start Menu works again but still have corrupt files after an SFC scan. I recently did a clean install of Windows 10 after some non-related issues. CBS log is attached. I'm having trouble determining the problem from the log file.
View 4 Repliescan some of you do an sfc /scannow and check your results with the November update installed? I always do this when i finish installations, and on 3 computers and 4 installations on them, 2 on one computer just to be sure i am getting corrupt files and struggling with my anger to not go back to windows 7 and get rid of all win 10 problems and MS ignorance. here is my results, many corrupted files in the log.. but is long so i don't post it...
Microsoft Windows [Version 10.0.10586](c) 2016 Microsoft Corporation. All rights reserved.
C:WINDOWSsystem32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios.
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
I keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
I updated to windows 10 and I couldn't find any of my files. Eventually found them moved in a folder. Once I restarted my computer, all of the files were gone and I had more storage on my computer. These are files as in music, movies, and pictures. They are NO WHERE to be found.
View 2 RepliesWe have written several programs in VB.2010. They all have a setup and deploy project to create the MSI file. There is a launch condition for a specific file.
This same technique is used in many other programs we have. All work in Windows 7, 8, etc. but not in Windows 10.
The file is there where it supposed to be.
Some programs work using the same exact file in Windows 10 and some do not. All work on Windows 7, 8.
The file is QBFC13.dll and is in C:Program Files (x86)Common FilesIntuitQuickBooks Search Target is [CommonFilesFolder]IntuitQuickBooks
Program files (.exe) which are not installed (and so don't have a shortcut) are not being found by Windows search. Shortcuts, folders etc with the same name all show up.
Indexing is complete and .exe is defined (as default) in indexing options to Index Properties Only using the File Properties Filter. If I open up the old Windows 8 fly-out style search then .exe are found so they must be in the index.
I found this thread which is the same [URL] .... but the HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerFolderTypes registry key doesn't exist in 10.
How to make this work in the normal Windows search? (I'm not interested in any third party search tool).
Downloaded files disappear in w10 home.They are not anywhere, not even in file history. Recuva revovery software does not show anything.
Alberto Product name:HP ENVY 17 Notebook PC
Product number:G0U21AAR
Serial number:6CF4482BZW
BIOS:F.34-12/19/2014
Keyboard revision:77.35
Total memory:16.00 GB
Processor name:Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz
I updated to Windows 10 earlier today. I thought I had lost some important work files and some pics of my kiddo from the last 3 months. Found them by looking in the network folder. Copied them to the desktop to remind myself to send a copy to my external hard drive when I got home. Laptop restarted and when it came back on the files were gone. I could search for them and find them but they wouldn't open. In desperation I restored back to Windows 8 in the hopes that they would be found but they are nowhere to be seen. Don't even show up in a search. System restore shows no prior restoration points.
I have about 70 hours worth of work done that needs done by the end of the calendar year, work that I will have to make up on my own time and not get paid for if I can't find these files. I also have the last 3 months worth of pictures of my daughter on there, her birthday trip to the zoo, visit with my sister, things I want to put in her scrapbook.
Just had computer upgraded to windows 10. When I try to acces the old shortcuts, I get path not found error message
View 2 RepliesI just trashed my old computer and built a new one (moved from Windows 7 to Windows 10). I had quite a few files I wanted to keep, so I stored them all on an external hard drive. I can play the video files in question from the external hard drive, but when I try to copy the files to my internal drive (so that I can store my external safely) the transfer rate quickly drops to zero and then after a few seconds a pop up tells me that the file cannot be found. I know this to not be true since I can still play the files.
View 1 RepliesI am aware that windows 10 (I am used to Windows 7) will not negatively play MPG files. I know this is a side effect of the codec being ripped out to prevent DVD playback via Media Player. The annoying thing is I have quite a few family MPG files mainly from our ageing Sony Camcorder on my system. Luckily I have Cyberlink Media Show pre installed that can play the files within it's own software and the media suite (espresso) can convert said files to other formats.
However, converting takes time and it is frustrating that media player 12 won't do the job and Windows Explorer won't display these MPG files with the handy thumbnail within file explorer viewing. Given that I am a little distrustful of codec packs and all my other files such as MP4, WMV etc etc play well I am looking for a solution that maybe just allows windows explorer to display the thumbnails and as an added bonus Media Player can once again play them. It does seem draconian that MS stifled a common playback format such as MPG in the last 2 windows and a major backwards step. I know I could download something like VLC or Media Player Classic but it seems pointless seeing as I have software that can already play them.
I tried K Lite Codec Pack a while back but hated the effect it had that I uninstalled. It was causing thumbnails to constantly refresh everytime I opened a folder. So is there a way of slipping in a single codec only related to MPG files without risk of unsettling all the other stuff that works well? Many of the codec packs seem to have the unpleasant side effect of slipping in extra installations and seem very dodgy and capable of causing grief.
Having trouble with my computer put in a sd card and an error said directory not vaild so after some looking online it said to run sfc so did that but it did not fix some errors. Upgraded from Win7 my computer is custom built...
View 12 Replies