So after the upgrade to win 10 I've been have an annoying problem, if my pc goes idle for a few hours the screen will go black and I can't do anything but a hard reset. I looked in my event viewer and saw lots of errors so I just wiped the event log to start over and maybe find out whats going on.
I also ran a system scan in the command prompt to see if there were any errors but it found 0.
I recently updated to windows 10. I play WoW often and lately when I get a skype call with the game on everything freezes then screen goes black. It's recovered once but typically requires me manually shutting the laptop down. It's an HP and came with 8.1. I bought it new and have had it under a year.
Wanted to add that I can usually hear sound for a while after the screen has gone black. I even continued a skype call for about 3 minutes until the sound cut out too.
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
on power up the PC freezes before getting to password screen. When I reset the PC (second power up ) it continues to the password screen and all is O/K.
I had a computer man in to install Windows 10 and remove Windows 7 and I wish I had never done it. I can be writing away and then all of a sudden it freezes and comes up with a couple of pop ups before waking up again. Occasionally the computer freezes solid and I have to manually switch it off. I have the computer man coming again tomorrow which will cost me more money but I'm getting close to just giving up and buying an Apple.
Although normally random, the freeze (to which this dump file is related) happened whilst listening to music in firefox, using teamspeak 3 and playing guild wars 2, after 2 hours with no issues.I have run memtest86 in multiple memory configs, only to receive under 10 errors in test 13 which I understand is OK.The errors are systematic for my type of memory (all sticks show similar errors in test 13 regardless of memory slot).
My Specs: Windows 10 pro CPU: 6700k (not OC) GPU: Fury Strix RAM: 32GB (4x8) Crucial ballistix sport DDR4 2400mhz Mobo: Maximus ranger viii PSU: Corsair HX1000i OS HD: Samsung 850 Evo HD: 3tb WD green
Two week ago I upgraded to windows 10 and immediately installed a new SanDisk Extreme Pro SSD Drive. All is working fine with the exception of Netflix that freezes avery minute or so in medium and full screen, (works ok in minimized screen).
I understand Netflix needs "Silverlight" to function which is supposedly supported by Windows 10 but not by Windows Edge. I've tried running Netflix on Explorer but still have the same problem.
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter 2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot) 2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor) 3. Extend (still black screen and cursor) 4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
My Windows 10 tablet randomly freezes and brings me to a blue screen saying something along the lines of this pc ran into problems and will restart in 30 seconds or so.
My PC keeps freezing randomly, can be while gaming, online or even when it is just sitting idle on the desktop. Iv'e reinstalled windows twice and updated all my drivers but it still keeps on happening.
My Specs are: Intel Core i5 4430 - no overclock 1 x 4gb DDR3 RAM Gigabyte B85M-D3H Nvidia Geforce GTX 770 Cooler Master RS-500-PCAP-I3
When the crash happens there is no blue screen and the screen just freezes. If there is any sound playing it just goes into a buzzing sound and stays like this until I reboot, after this the PC starts like normal. Is there anything I can do to stop this from happening?
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
I don't know what to do. I've tried everything. I am literally about to break down crying. I've been at this for six and a half hours now. I've completely run out of space on my 320GB hard drive, and I've been trying to clone to my new 1TB since I got home from work.
I've currently got windows 10 on a small HDD that I need to transfer to my newer, bigger drive. I do have multiple hard drive slots, as I need the OS on the big one. Don't ask why, it's complicated. Point is, I can't use the little one anymore and I need the OS as well as my files on the big guy.
I've tried 2 different cloning programs, each one taking ages to finish copying. The problem is, everywhere I go says the reason I have blackscreen when I try to boot is because I'm missing the 100MB hidden boot partition. But it's sitting right there.
I've tried booting with only the new HDD installed, tried 100 boot and BIOS settings, different slots, completely formatting the new HDD and starting over from scratch with the same program and a different one.
I've even tried booting from a recovery disk. That won't work either, and gives me the same black screen with a single horizontal bar blinking in the top left corner.
When I boot my pc sometimes I get a black screen. But by pressing ctr alt & delete I can log out, and then login and its then OK. I have reset my pc but its still the same.
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
So.. I screwed up.. I used a small program called something like Windows 10 Login Background Changer (something along those lines) and when I restarted my computer, it never reached the login screen. I can move the mouse and open Magnifier (was pushing random controls), but I don't know how to get past here.
I downloaded windows 10 on my laptop today and now I have a black screen. I have shut down my laptop and restarted it and the windows emblem comes up then goes to black screen again.
I have acer aspire 5740 laplop, core i3 ..... A problem occured extending c windows drive as described below. It have 3 local drives
c - 20gbboot primary drive d - 90 gb system , primary drive e - 50 gb logical
Some unallocated space, I was extending c ,by deleting drive d ,at the deleting drive it, gives warning, that if you delete drive d , may your system not get start, i deleted, sudden restarting windows, displaying operating system not found, i tried to install new windows, no booting, after 2 trial, it showing black screen , i have tried some soln as per knowledge ram reset, ms dos boot usb drive. but nothing happened, laptop get normal heat, felt like hardrive boot.
Computer boots to windows log on,have no password here.After a minute on log on it go to a black screen,stays there forever. I can get to Task Manager from black Screen,lost on what to do next. Just want my Windows 10 back, not sure what caused this problem.