How To Make Install Disk
Jul 31, 2015after activating windows 10 upgrade, how do you make the install disk so no key is needed and that you can do a clean install
View 1 Repliesafter activating windows 10 upgrade, how do you make the install disk so no key is needed and that you can do a clean install
View 1 RepliesI've tried using the "Create a Recovery Drive" and have tried making my own installation media using the "Media Creation Tool". Both seem to do nothing, just constantly search. The Media Creation Tool stays on the "getting a few things ready" screen for upwards of half an hour then I'll close it and it'll say "setup is cleaning up before it closes" and it'll stay on that screen forever. Even task manger won't close it - it will not show up as a process any longer, but still on the screen. EDIT: I have to shut down the computer to close the window.
Create a Recovery Drive, when choosing "Back up system files to the recovery drive", does pretty much the same thing, a screen with a green progress bar going left to right for hours. I'm trying to put it, either way, on a 32gb USB flash drive.
Its a new computer no software has been installed by me other than the MCT and a tool to find the windows product key. I'm very new to Windows 10 coming from XP.
Is there any way to make an installation disk for Windows 10?
I have my backups and such, but I want a disk where I can scrub the hard disk and reinstall from the beginning.
I have just upgraded a machine from windows 8.1 to windows 10 and I can't make a rescue disk that will boot.
The creation of the disk goes perfectly, right to the end. And when I reboot the machine it says the disk is not bootable.
I tried other boot disks I have here and they all work. What am I missing on this Windows 10 system?
I am using a small tablet with Windows on it. It already has little space (32GB which is actually 29 GB), with Windows eating up a ton of space. Now, with a virtual partition on the tablet reserved for system recovery, I have less than 5 GB left, not enough for Windows to update. I would like to merge the virtual partition so as to get ~5 GB extra space, in or to do so I would like to make a recovery disk on a SD-card.
The problem is, Windows does not seem to recognise the SD-card when I try to make a recovery disk! Is there a workaround, or did I get the SD-card in vain?
Successfully upgraded to Windows 10, all applications and settings works perfectly and all previous problems are gone.
I've been facing a collection of annoying problems with my Windows 8.1, specifically setting saving problem, for example can't save settings like default app, folder and icon size, i didn't update to Win10 yet because i am working on very important projects.
My question is, do you think this kind of problems will be fixed after updating to Win10 by keeping all my files, programs, etc... ?Or should i do a clean installation of Win10 so my computer will be "system-new".
I have had no success in installing Windows 10 as an upgrade to Windows 7 on my newly built system. What I intend to do tomorrow is to install from the OEM disk which I just purchased for $117.14 from A...... I may return the Windows 7 disc ($61) for refund if it is successful. If not the Windows 10 disc goes back for refund and I will keep Windows 7. Yes, they will issue full refund and free return shipping no questions asked. That is an additional $56.14 to acquire Windows 10 (including a disc) but worth it to me I'd cross my fingers but those from my planet only have one digit per limb.
View 2 RepliesI want to clean install Windows 10 on another hard drive. When the custom dialogue comes up and it asks me which hard drive I want it to go on to, it does not give me the hard drive I want to put it on as an option. It is a 160 GB SSD. Windows 10 was registering it as a removable drive. I have a dual boot system and Windows 7 does not register it as a removable drive. It' s been working well as in internal drive for a couple of years until this Windows 10 thing.
View 4 RepliesIs there a way of going to 10 from 8.1 without burning an iso disk or USB, ie direct download and install.
View 2 RepliesI have an SSD with an OS already installed, now I want to install Windows 10 on another partition.The things is, when it's time to select the partition on the installer, it says that i can't install windows on the disk because it has an MBR table, and EFI needs to be put in a GPT one.
The problem is:
1) The disk is already formatted for GPT due to the old OS already installed on it.
2) i CANNOT format the entire drive!!! I need that OS there and currently i don't have ways to backup my data.
So my question is:Is there a way to fix this WITHOUT wiping the whole SSD? Because I've already googled everything related to this problem and EVERY WHERE the solution is to format the entire drive (which again it's not a solution for me).
I have successfully upgraded to Windows 10 from Windows 7 (and solved the initial network connection problems).
However my OS has a lot of crud from the pre-upgrade state and I would like to do a clean install of Windows 10, without losing any old data files. I've read online guides on doing clean installs of Windows 10, but it is not clear whether you can only install into partitions that already have a valid Windows OS installed.
My computer has two identical hard disks, one of which is (or can be made) blank so what I would like to do is keep one with the 'cruddy' version of Windows 10 - at least until I have copied over all the files I want to keep and made sure I've installed all the software I want on the new 'clean install' Windows 10.
So, are there people out there who have done this? Are there things I should look out for?
When I go to repair Windows 10, I put in the install disk, it goes to the windows logo with the dots spinning around at the bottom then to a black screen. I left this for 1 hour and it did not progress. The disk also seems to have stopped spinning. The disk works in other computers.
View 1 Replieshow can I install Windows 10, that it uses the less disc space, it can? My problem is, that I have laptop with 64 GB SSD, and after upgrading (from windows 8.1) to Windows 10, the used space is more than 35 GB, so now I have a very little free disc space now.
View 2 RepliesI know I need to disable secure boot in order to change the boot sequence. I ran into an issue trying to install Windows 10 on a GPT partition - it said it couldn't do it. So...after much searching, i learned (??) i need to use diskpart to clean the partitions to create one large unallotted space which would then allow me to install Windows. My question is, can i convert the disk to mbr and install Windows to it that way and run it in that mode. If i can do that, what would be the command to do that? > convert mbr after the clean command?? What about enabling secure boot?? Can i do that if i have installed Windows under MBR rather than GPT?
View 8 RepliesI have a laptop that came with Windows 8.1. The hard drive failed and has been replaced with a new hard drive. If I want to install Windows 10 on this laptop, do I first need to install Windows 8.1. and then perform the upgrade to Windows 10, or can I just install Windows 10? Will Windows 10 use the Windows 8.1 license key in the BIOS to activate? Or will this not work unless I first install Windows 8.1. and then upgrade to Windows 10?
This computer has never had Windows 10 on it.
The computer has a new unformatted hard disk that has never had Windows 8.1. installed.
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 RepliesI was having long boot time issues with windows 7. It was taking more than 5-6 mins for my pc to become responsive on desktop. Then I upgraded windows 10 today , issue still persisted. After that , I tried clean installing the 10.
I still have issues which are :
1)After Windows logo I have a black screen for a couple of minutes then logon screen comes. ( Last reboot : 1.5 mins )
2)After logon , my formatted pc takes some time to became responsive due the system and svchost processes using hdd %100.
(2mins after logon , usage goes down and pc is responsive)
I checked my HDD and it was fine when using win 7.
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 RepliesI have a configuration where win 10 is installed on SSD but the Users folder is on a dynamic disk on HDD and the linking is made by a hard junction link from C: to D. I have removed paging on D as well as protection. Hence, I am able to remove all volumes of the dynamic disk and convert it back to a basic disk and format it.The problem is that I would like to keep all my installed programs (and settings, preferably). I have copied the Users directory to an external disk and copied them back to D after conversion. This seems to lead to a nonfunctional situation where I cannot even add a new user and most programs (even not all windows tools) do not work.What would be the best approach to avoid reinstalling the programs and to keep existing users?
View 2 RepliesRunning windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
View 5 RepliesSo, after about 2 weeks of experiencing Windows 10 I've decided to revert back to Windows 8.1, since I was more experienced at it. So I followed every step to downgrade the system, waited for about a few hours, then I noticed that when Windows restarted, it somehow went to an "automatic repair" loop. I've tried literally everything there was so I can get it running again, but nothing seems to work. But, there was only one option, in which I feel like an idiot to try out.
I went to Command Prompt and typed in diskpart.exe, then enter. I then typed in LIST DISK, then SELECT DISK SYSTEM, and finally CLEAN. Since I thought at the time that CLEAN works like resetting the PC, I rebooted it again, and I came to an error message saying: No boot disk has been detected or the disk has failed.Is, or will there be any other way to start my PC in a condition like this? If I'm missing any other details then feel free to ask.
Every time I boot up my pc I get a black screen with 2 lines of text "disk i/o error, replace the disk and then press any key". After I press any key pc boots up fine. Lenovo pc with Windows 10.
View 1 RepliesHow to make the Pop UP appear in Windows 10?
View 1 RepliesWhenever I boot up the num lock is off. I would like for it to stay on. Is there a way to fix this?
View 9 RepliesI hate the windows key. How can I remap it to run a program instead? I want it to run a "show desktop" shortcut I got.
View 1 Replies