So I found this issue in my second laptop that running W10TP. I have HP as my first, and ASUS as the second one.
In my ASUS (2nd) I can't booting the laptop without force shut down through hold the power button, because it always stuck at Windows logo. After shutdown and boot again, I succeeded into the lock screen. But it taking too long in the blank screen for almost one minute.
This issue never happened in my HP laptop.
I've tried many methods to find this issue, system scan, virus scan, update installed drivers, driver scan (it failed). And for a couple days it work so well and I'm happy for that, no more stuck at booting.
But the issue come again after many security update for build 10240. The booting is stuck again and BSOD with pfn_list_ corrupted. After restart the laptop I've tried again all the methods that I've did. And then I found so many viruses and malwares from Windows Defender. It's odd for me because it is never happened before, and suddenly of course.
After the viruses were cleaned, the issue is still persist. I want to reset my laptop from settings/update& security/recovery/reset. Is this necessary to do considering W10 will come in 3 days left?
I have a Lenovo G500 upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stuck in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files) .
I upgraded my laptop from windows 7 to windows 10 in August and there were no problems. For a month now, it boots till a black screen with the cursor or to the screen with the five dots. The only solution that I have found to boot normally is after five to six resets it boots normally, but next time it cannot boot again. I performed a system restore to a restore point of a month ago, but it came with an error about a problem of my antivirus program. I unistalled my antivirus and I tried again, but this time there were no restore points.
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
I bought an asus tranformerbook t200(with windows 10 update) on 11 august and was very happy with it.
Occasionally, the laptop couldnt find any wifi networks but that was fixed quickly by just turning the computer on and off, until today.
Today at school(my second school day at university), i had no internet anymore. He didnt find any networks anymore at all. Turning the laptop on and off wouldnt so a thing. So i tried some things, like turning the broadcom device on and off via device manager. That also didnt work. A user in the internet on another topic suggested to delete the broadcom and then reboot, i did it and things only got worse. My laptop didnt recognize the broadcom wifi adapter anymore at all.
Then I tried to format windows(with saving documents addition) which unfortunately failed. After that, i tried to format it and added the option that everything would be cleaned, that failed also. c windows system32 logfiles srt srttrail.txt is apparently the error.
Now if i start the laptop, the asus logo will show but thereafter the screen just turns black. I tried system recovery and even startup repair but both fail.
I have a Windows 10 computer, but whenever I try to turn it on. It just gets stuck on the windows logo. I have tried a recovery USB, but it hangs as well on the windows logo.
When I tried doing an automatic repair, it also hung on the windows logo with Preparing Automatic Repair for hours. I am doing this for my friend, and he doesn't want to loose his important files (yes, i know, he should have backed them up).
I downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)
My system config is below Intel i5(4th gen) Gigabyte H87 D3H(which has UEFI) and flashed to version 9 Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10) 8GB RAM SSD(60 GB, which has corrupted win 7) HDD(500 GB)
Believe I have the minimum system requirement to install Windows 10?After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX).
But even then it doesnt move forward from the windows logo screen. how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg
When i boot my pc up, it can successfully go into bios, but once it reaches the windows logo where there is usually a loading indicator underneath it, it freezes. the loading indicator is not there, it seems that my usb ports quit working (my keyboard and mouse stop lighting up).
I've been having this problem for quite a while now ever since i upgraded from windows 7 to windows 10 however i was able to successfully do a usb boot and wipe my hard drive and install windows over again, and I've been completely fine for about a month now, but the same thing is happening again.
I am guessing it is a corrupt windows file but i find it odd that its recurring even after i did a total wipe. Also I ordered a new ssd (500gb samsung 850 evo) to replace my current hdd, maybe that will fix this problem? I am also planning on upgrading my cpu, mobo, ram, and gpu soon. i will leave my current pc specs below.
I have not found any problems similar to this online. to make things clearer, i cannot get my pc to do a complete boot at all. it always freezes on the same screen, the only way i can get out of it is to do a force shutdown. I am starting to think that perhaps the problem may be my video card? also i do not have any spare parts or other computers to switch parts and test unfortunately.
After doing multiple things to find a fix (swapping ram slots, unplugging hdd and gpu and plugging back in, etc.) while on the frozen windows logo screen i unplugged my mouse and keyboard, plugged them back in, hit the restart button on my pc, and.. it started up? now i have noticed lag-like performances with my mouse (razer deathadder chroma) its as if it loses connection for a split second and the lights on it will simultaneously flash. the mouse is only a month or two old and i do not remember if i had problems with my old mouse.
I have just plugged it into a usb port that is on the side of my pc instead of plugging it into one of the back ones. I will update with if needed for the "lag" however i am still concerned with why exactly it froze like that during boot up. im not going to shut down my computer until i know what the problem was and how to fix it. ill just keep it in a low power setting when i am not using it.
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Msi motherboard ...
My specs: msi white gtx960 2gb <- gpu MSI 760GMA-P34(FX) <- motherboard
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
I currently have Win10 32bit. I made a bootable USB and DVD to upgrade to the 64bit version, both yield the same results. Each time I try to perform a clean install, it just hangs at the blue windows logo, no spinning circle just the logo. I let it sit for about 4 hours and nothing changes. I've tried many methods but none seem to work.
Core2Duo 3ghz 4069 RAM 560ti video card 1 terabyte HD. Intel P35 BIOS for P35-DS4 F12 I also have my hard drives partitioned Legacy mode BIOS
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Its an Msi motherboard ....
My specs: msi white gtx960 2gb <- gpu MSI 760GMA-P34(FX) <- motherboard
I downloaded Media Creation Tool 64 bit.First i clicked "Upgrade my PC now" it downloaded Windows 10 and asked me to reboot. After that blue windows 10 logo appeared I have waited like 2-3hours but nothing happened. I tried even installing through USB but same thing blue logo appears and nothing... Why can't i install Windows 10?
PC Specs: CPU:Amd Athlon II X4 641 Quad-Core Proccesor 2.8ghz GPU:Amd Radeon HD 6700 Series RAM:4GB OS:Windows 7 64bit
Upgrade from Win 7 64bit to Win 10 64 bit on a Gateway laptop 3 days ago and everything worked well. This morning the laptop hung up in the booting process and wont fully load the OS. I get to the window logo, a greyed login box, and in task bar the clock and battery icon but nothing else. No start button no search and none of the pinned programs. Setup has only one user
I cant get into safe mode with Win key + R so I cant even get far enough in to roll back to a restore point or back to Win7 and I would prefer not to have to do a clean install of Win 7, restore my image and then re-upgrade if at all possible.
Today when I tried to reset my laptop my battery died (I got up to 29% on the reset), because somehow my charger got unplugged. Now when I turn it on I get to the Logo (asus) then get a black screen. (I have tried taking the battery out and pressing the power button for a couple seconds and I got nothing) I don't know what to do!
How can I enter the "choose an option" screen, the blue one. I can reset there. I chose continue to windows 10 and now I keep getting black screen after logo. is there like hotkeys to press while turning on?
I built myself a new computer recently and it boots fine if I am booting into the bios. However when booting off my thumbdrive to install windows 10 it boot loops, getting the the windows symbol and then restarting.
I'm having a problem with my desktop (win 10) booting whenever I'm using my laptop (win 7 still). Now, I recently moved, so actually have everything on my network now (yippie). Before I had some networked drives mapped to the laptop, so I disconnected those, problem still persists. I just changed power options on the desktop to all (of the power plans), allowing sleep for media streaming, still, same problem. Then just 30 mins ago or something I joined my laptop to the workgroup and the homegroup (I haven't been using it much and been busy with school and work), thinking it may be some thing that clicks with that and gets it working right. Still it keeps doing this! Very annoying and obviously I dont want it to do this (of course the desktop uses a good amount of power and I dont need it on when I want to use my laptop).
May have to upgrade the laptop to windows 10 or do a clean install of win 7 for this to work I guess. I kind of like Win 7 better actually still, but I'll keep Win 10 on the desktop because of DX10. (really the only thing I care for on Win 10 is the new xbox app and of course, DX10, other than that, eh, its okay, would rather have the old start menu and control panel and though I didn't really use it, windows media center).
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
I have a Lenovo P580 laptop. The screen wire got shorted out, so I just always connected it to a TV and never really had a problem. I recently upgraded to Windows 10 from 8.1. After getting that issue with the start menu and cortana not working, I tried the make another profile, etc stuff from the internet. I changed my laptop to always load into safe mode using command prompt... NOW, every time it loads up, it loads into safe mode... only problem is I can't see it or do anything because the output for my tv doesn't work.
So... I bought a new wire for the laptop screen... nothing. Bought a new screen... nothing. So I assume the motherboard is damaged... The HDMI and VGA ports worked up till I set it to boot into safe mode...
Is there anything I can do? short of replacing the motherboard?
I restarted my PC after my screen blanked out in a game I was playing after changing the resolution. Then when I boot my PC, the Windows logo appears, the loading thing starts rotating, then it black screens and my monitor displays some text saying "no video avaliable".The only thing I can think of is hard drive corrupted as, whilst running, my PC almost tipped over, but I stopped it.
I will try boot the PC with another hard drive to test my theory
I turned on my pc and it froze right after it passed the Blue windows logo screen. A black screen appeared with no cursor.
I rebooted the pc (through the reset button) and everytime it got stuck at the black screen and then rebooted on its own. After a few rounds of black screen and reboots, I got the advanced repair options but it couldn't repair anything.
A very few times that it did manage to go boot and go to the desktop, it froze and didn't let me open any files or folders. Also when I mouse over the files, a black box appears around the icons and the file names appear garbled
I haven't installed anything lately that might cause this to happen.
Yesterday morning the PC worked fine. Last night it refused to load Windows (10) but rather froze on the logo, with the whirly loader. Forced shut down, tried again, same deal. Next time it said "Starting Windows repair", but froze. Next time it said it too, and the next time it didn't. It hasn't said it since. I left it sitting on the frozen screen for about a half an hour, and it gave an error message "Boot disk inaccessible". Unhooked everything, reset CMOS, checked BIOS, reseated memory, ran memory diagnostics, etc..
So I put in a brand spanking new SSD assuming the old one was to blame (as it had become a bit sluggish anyway, being a few years old and all) and went to install new Windows from an official USB stick. And up comes Windows logo and the whirly loading thingy.... and it freezes. I just don't know what to do anymore.