I was working on this laptop when quite often, after startup or in the middle of something (random), the screen goes blank and flickers, with random lines, etc. but you can't see anything.
When I am able to actually see because the problem hasn't started yet, everything works fine, no slowdowns, etc.
Moving the lid does nothing to alleviate the problem.
What is the potential causes? GPU? Battery? HDD? I did a BIOS test that said the HDD needed to be replaced. Laptop is older, back in the times of Vista. But I don't think it is the OS because this happens right at boot sometimes, other times at the logon screen, and others while inside.
Just installed Win10 on my 4 yr old HP G60535D. Now I have have to re-boot everytime I shut the lid. Played around with power settings, etc etc but no luck. When I first open the lid, I can hear the computer running, a slight mechanical burp of some sort, then nothing... totally blank screen. I have to hold the power button down to shut it off, then re-boot. A 1st world problem for sure, but kind of irritating.
I downloaded and installed the Windows 10 upgrade on Tuesday. Since then my Dell Vostro 3550 laptop will not boot and is stuck on a blank blue screen. I took my laptop to Geek Squad at Best Buy yesterday and he told me Windows 10 is installed but it will not boot. He loaded their MRI operating system with my CD/DVD drive and he told me my files are still on my laptop. They wanted $100.00 to get my files of my laptop into a flash drive. The flash drive cost $30-40. In order for them to fix my laptop, I would have to pay $200.00 for a one year service contract. Then, to solve the problem, they would delete all of my programs, and possibly all my files, from my computer. That totals a minimum cost of $340.00 and that is if they do not find anything else wrong. I told them I could not afford that and I took my laptop home.
When I got home, I tried again to boot my computer and I got this message: WDF_VIOLATION. I ran a pre-boot diagnostic and I got error code 2000-01 42. Msg: Hard Drive 0 - self test unsuccessful. Status = 7. I looked online for information on this error code and found people saying that this means the hard drive has gone bad and needs to be replaced.My laptop was absolutely fine before I downloaded Windows 10 on Tuesday. Now my hard drive is destroyed and my laptop will not boot!
I have msi laptop Windows 7 now I updated online to Windows 10 and reset. After reset now my laptop screen is blank and dash line blinking on top left side. Nothing working tried lot by pressing f10, f2, ctrl+alt+del...
On a Dell Vostro 3550 laptop, there were a few issues with Windows 7, so I erased the drive, did a fresh install of Windows 7 Pro, downloaded and installed all of the drivers from Dell. Then did a Windows 10 upgrade. When Windows 10 would first boot, it kept giving a 0x error. I did all of the Windows 10 updates and that error went away. But it would boot to a black screen.
I plugged an external monitor into the laptop and updated the BIOS to A12 and I have video on the laptop again. The main problem I have now is every minute or so, the screen will flicker and explorer restarts. As soon as it flickers, the task bar is gone for a second and then reappears. I have uninstalled the video and sound drivers but this didn't change anything. Is there something else to try to get Windows 10 to work correctly on this laptop?
I have an Asus Zenbook UX303LA, and I upgraded to 10 yesterday. When I put the comp to sleep and wake it up by opening the lid, the screen begins blacking out and refreshing. Everything else seems fine--I can open apps, navigate the desktop and so on, in between the black outs. The problem has so far been solved by restarting each time. I can't find any information on this issue, so I don't know what might be causing it (driver incompatibility with 10 seems a likely culprit--this was not at all an issue with 8.1, which is what I was running prior to the upgrade).
I installed windows 10 in my laptop. But everytime i open it. It will show the desktop icons and all of my apps for few seconds then it will go blank. I cant do anything from my laptop. Its just plain black
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
Have the above laptop and when trying to upgrade from Windows 10 I get the dreaded black screen problem.I get to 85% after I few reboots and it hangs at that point. No cursor on screen,clt alt del not working nothing,just blank screen no hdd movement. I tried plugging laptop into TV by hdmi still no screen. Power of laptop and previous version of windows reinstalled.
I upgraded to Windows 10 a couple of days. The system was up and running that day and the next (yesterday 17 September). Today, the screen is blank and the mouse pointer comes up but no login box.
I accidentally hit hibernation button last night. Woke up this morning and the computer will start up but that's it. There's only blank screen. And I can hear the computer on. I also see the power light on from the power button and the plug into the computer.
I instigated the ugrade last night and (on my PC) and left computer to do its thing. Now, the screen is completely blank (if I unplug and replug it says 'no signal). What do I do now?
Whenever I boot up my computer my monitor receives no input from my computer, however the computer will still be on. I can't even turn off my computer through holding down the power button, I have to unplug the power. The first time my computer crashed into this state I was playing a game, the second time I had managed to successfully boot up my computer but it crashed again when I was browsing the Internet.
Today I have been using my PC as usual, I got info of Windows Updates (I'm using Windows 10) I opened up the updates and restarted my PC. As the PC was launching I got no display at all. Blank screen, nothing at all as if the PC was not detected. I tried restarting PC, removing graphics card / ram then replacing them but no use.
when I start up windows 10, type in my password and hit enter, it takes a bit longer to load and but doesnt even load my desktop. I can ctrl+alt+del to get task manager going and open up chrome with that, but it wont load any web pages. I didn't change anything the day before so I dont know whats up. I tried booting into safe mode but it still does the same thing. Luckily I had my old hard drive with 8.1 still installed so I could get on, and everything works fine on it.
After installing Windows 10 I had a gray screen. I thought the laptop had gone to sleep so I pushed the power button to wake it up. It powered down so I powered it right back up. I got the small new Windows window icon and the spinning circle below it then the screen goes blank and nothing! ?!
Running Windows 10 Home. Build 10240. When I start the system the screen is black. When I go into File Explorer and click on Desktop all of the items appear there. I can click on say e-mail and I can get into mail and read or answer them.
could I use mct and get the latest there and then do an upgrade which should keep all of my data and files. I originally did the upgrade from Windows 7 Home and that all went well.
My Laptop is Lenovo Y50. All of a sudden , on logging, the screen went blank with a mouse pointer & i couldnt enter password. No Control, alt, Del works. I didnt do any Windows 10 Update. Now the laptop is as good as dead. Only i have to reinstall the OS? There is no other option?
During boot-up, I get a blank screen (shows cursor arrow which responds to touch pad movements), after the sign in page, which I can't I can't escape from except by forcing shut down and restart. The reboot can then take as long as five minutes to complete. I have considered using the restore route, but am warned that there is a long list of apps etc which will need re-installing, and this looks arduous.
I have been experiencing problems with Windows 10 ever since I've installed a new graphics card: the MSI Nvidia GeForce GTX 750 Ti. It worked well the very first time. But rebooting gives me a blank screen. I have been able to enter the system once (by clicking the spacebar and entering my password blindly but that does not seem to work anymore) to try and update the driver that came with it.
I wasn't able to as I first needed to uninstall the previous one, which required a reboot. I was also able to check under Device Manager / Display Adapters to disable the shared Intel Monitor and enable the GeForce card. As confirming these new settings also required a reboot, I decided rebooting was probably the best option. I should have known better. I'm back to my blank screen and nothing seems to work. I have tried F2, F8, F10, F12, Windows + P + down arrow twice, spacebar, and Ctrl.
How to reboot and enter the system? And what to do next?
Two weeks ago accepted prompt to reserve upgrade from Win7 home edition. It said my PC qualified. Yesterday, accepted prompt to begin upgrade. About 4 hours later after selecting Yes/No settings, and being told about the 4 included apps, the status worked up from 1% and must have reached 100%. Didn't turn off screen or power. Now I have just a cursor on screen. Is it safe to power off or was it a complete failure?
