I tried to reset Windows 10 after having problems with Drive C ,after going through some of the procedures a notice came up saying it couldn't reset. Now nothing comes up on the screen only the Samsung name flicks on & off. I have pressed the F4 key to no avail.
I upgraded from windows 7 to windows 10. After experiencing some problems I thought the laptop might run faster if I simply reset it. I picked the option to remove all personal files since everything is backed up anyway. After resetting my PC boots up, goes to a blue screen where it says it can't start up with the error "INACCESSABLE_BOOT_DEVICE" then restarts and does this process again.
My laptop has pretty good specs so it should have been running faster than it was and I am now stuck as to what to do.
My Acer Aspire One was upgraded to Windows 10. Eventually, I ran into some issues with the start menu not popping up, so I decided to run a clean reset of Windows 10. The reset failed, so I turned off the notebook. When I turned it back on, the message "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system. Press Ctrl+Alt+Del to restart," popped up. My first option was to try to use either f2 or f12 to see if there was some way to get around the issue, but then I remembered that, recently, my notebook had stopped responding to those commands. I do have a USB Logitech K120 keyboard hooked up to it (since the original keyboard messed up,) but it had been working fine for those commands and such up until now.
Today, I downloaded Win 10 using the Media Creation Tool in an attempt to create a bootable USB drive. I plugged that in, yet it doesn't seem to recognize it at all. The same message pops up as before. My acer doesn't have a CD-ROM or anything of the sort, so the USB appears to be my only hope. Is there anything that I can do? I'm hoping there's a way I can force the notebook to recognize the USB, or at least boot into the f2 or f12 commands to see if I can use them in any way.
Recently, I decided to do a factory reset, to cleanly wipe my drive, with the exception of Windows. When the reset was about 30% through, the reset failed. Now, when I try and use my laptop, it only gets to the ASUS logo, then goes to a black screen with a flashing underscore symbol on the top left corner. I've tried doing F9, SHIFT+F9, and everything else in between. My laptop is an ASUS G74SX, and I don't have a recovery partition for the laptop. I also cannot get any external programs for the laptop, such as ISOs, etc.
So my computer has been kinda laggy and running slowly so I figured I would do a clean reset of Windows 10. It noted that it would take hours, which was fine. However about an hour into it, it said there was an error resetting. It then restarted the computer however I can't get passed the "ASUS" start up logo. It goes black and then loops. I hit F9 but none of the options work for me - automatic repair won't work because it says my computer doesn't have an administrator and when I try to reset again from there, it tells me that "a required drive partition is missing." I don't have the greatest knowledge on computers, so I really don't even know what that means.
I've read that I might have to reboot from a USB - how would I go upon doing that? Is there something I can download on the Microsoft website? I don't have a key because the computer came pre-loaded with Windows 8 and I upgraded to Windows 10 for free last year. Will I still be able to boot from a USB?
i tried to wipe my hard drive using the system wipe function in windows settings, and I let it do that while I had to go do something else. I came back to an error that it had an error during the process, and a sole button "cancel." It now tries and fails to boot up past the hp splash screen, and then black screens and resets. It does this in a loop, f8 does nothing, and it detects nothing. My warranty expired a mere 5 days ago, and I am absolutely lost.
Nothing changed, nothing installed. Edge stopped working, Cortana stopped working. Mail stopped working. SFC scannow found corrupt files but unable to fix.Reset keep files and settings failed to boot and rolled back. As did remove everything.Stuck with a very broken PC that is filling logs with everything stopped working and was closed.Just defender installed.
I tried to reset my computer today after 3 years of using it without any sort of re-formatting, and all three times the reset got stuck on 65% before a blue screen appeared and said that an error occurred. It would then give me the options of either:
a) returning back to my windows 10, with nothing changed b) Trying to reset again c) advanced options.
I tried the reset 3 times, and after the last try failed I went to advanced options to look at other ways to approach the issue, such as checking if there were any restore points that I could restore to (which there were none).
After that didn't work, I clicked on the first option of just returning back to my windows 10, and that was when it would not start up anymore.
My computer now is stuck on a infinite loop of the launch screen of the ASUS logo, it flashes, then goes onto the second ASUS logo, and this is all it does, go round and round.
I tried to boot it on F8, F9 (the ASUS recovery button), and the 'delete' button. NOTHING WORKS.
I finally tried F2, which led me to the BIOS page? And I clicked on the boot tab and disabled the first boot configuration option, and still to no avail. It returned to looping, and when trying F8, F9, after disabling that BIOS option, and it still won't do anything but loop.
I convinced my friend to upgrade to windows 10 on his laptop and it failed leaving it screwed.
The laptop is based on a Clevo W350ET chassis.
When you turn it on it goes to a screen saying 'Recovery Your PC/Device needs to be repaired, A required device isn't connected or can't be accessed, Error code 0xc000000f'.
Any options like revert to a previous built, system restore or whatever do not work.
Any chance of saving the current install or will I have to reinstall everything? My friend has old programs he is concerned he cannot get anymore.
I have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
I tried to reset my laptop. In the process of resetting it shut down due to overheating. When I turn it back on, the logo appears but no loading bar shows up. It hangs there for a few seconds and then it restarts and keeps cycling over like that. I tried to do a hard reset by taking out the battery and plug, then holding the power button for 30 seconds. I tried doing a system restore. I also tried removing the ram to see if that would work but no luck.
Here's my specs: - 2.50GHz 3rd generation Intel Core i5-3210M Memory - 8GB DDR3 SDRAM (2 DIMM) Video Graphics - NVIDIA GeForce GT 630M switchable graphics with 2048MB DDR3 and up to 1696MB total graphics memory - Hard Drive - 750GB
Long story short, I have had Windows 10 on my laptop ever since the second I could upgrade it. Last week my laptop got infected with a virus and would not boot up. I tried everything and the only solution that would work was to reset it to factory condition which brought my laptop back to windows 8.1. I no longer see any notifications popping up telling me I can upgrade to Windows 10. Is there another way I can upgrade or am I stuck with Windows 8.1 for good?
So I upgraded to windows 10 but I wanted a clean install of it so i figured a factory reset would do it thinking it would have windows 10. But that was stupid now I have windows 8.1 with no windows 10 icon so my question is will the icon come back so I can upgrade back to windows 10 or am I stuck with the older version?
After resetting my laptop (specs below) from within Windows 10, it cannot boot anymore. It just displays the hp logo and after that it's a black screen with my mouse pointer, indicating that something is loading (the spinning circle). But how long I wait doesn't matter, because it doesn't boot ever. I have tried booting in safe mode, and that worked. But I'm not able to figure out how to boot normally.
my specs: HP Envy 15-j190nb Intel i7 M 4700MQ Intel HD 4600 graphics + nVidia gforce 840m 12 gigs ram
Yesterday I used the "Get Windows 10" option on my Windows 8.1 HP Envy-15 laptop. The process seemed to work fine and I managed to login and use the new OS fine. However, I decided that while I was installing a new OS that I might aswell clean the system back to the Windows 10 factory settings. To do so I used the Windows 10 reset option within settings. It didn't seem to be finished when I went to bed so I left it on overnight (for a grand total of around 15 hours of reset), but when I awoke it was still at the 30% I left it at it.
I decided to reboot it and this went into a Windows 10 screen which I promptly hit the "Exit and retun to Windows" on, however this did not work and now whenever I boot the system it shows the HP logo, then a black screen then back to the HP logo in a loop.
I've created a Windows 10 USB and tried to run that on the laptop but I can't seem to get into the BIOS settings either after trying the usual ESC, F12, F8.
Cleaning the keyboard whilst the computer was in the loop bought the BIOS up for a second and then it disappeared again and I can't seem to get it back as I do not know what buttons I pressed.
I upgraded my Asus X205TA to Windows 10. However I wanted get a clean install so I went into recovery and chose to reset the PC and clean all apps,files, etc.
Whenever I try this it fails then gives me a blue screen with options. Only booting back to Win10 only works.
Is there a way I can get my win10 key and install from a win 10 download?
I did go back to Windows Download tool and had it create a USB stick. Can I use this to do a clean install?
I don't want to move on unless I know I can get Win 10 installed on this again. I know once I erase everythign my there is no option to go back to Win 8.1.
Upgraded my laptop to Windows 10 today, but it didn't ask me about whether or not I wanted to keep anything or not.. it just automatically kept my files.. but I wanted it to wipe everything clean with this install. So I'm on Windows 10 now and I want to do a factory reset, and I've gone to Settings > Update & Security > Recovery > Reset this PC.. But clicking the "Get Started" button does absolutely nothing. I've tried doing the Advanced Startup > Troubleshoot > Reset this PC too.. but it doesn't ask me how much I want to keep, or do anything actually, that just goes to a black screen and resets my laptop.
I have msi laptop Windows 7 now I updated online to Windows 10 and reset. After reset now my laptop screen is blank and dash line blinking on top left side. Nothing working tried lot by pressing f10, f2, ctrl+alt+del...
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
On my desktop PC, ugraded to 10 on Friday morning, been using all weekend no problems. On Monday we had a winter wonderland, was checking snow history when electricity went off momentarily. PC shut down. I had perhaps 5 wiindows open at the time.PC powered back with message that windows had not shut down properly, it would repair, said it couldn't do, and since then will only start , and say restoring your previous version of windows....over and over again.
I got on this laptop,downloaded correct 32 bit version of 10, burnt disk from iso. can boot into that disk no problems. Have run all the recovery options. Reset - no changes made. Repair startup - no can do. Restore previous - cannot do either to 10 or 7. have run out of options. Even attempting the last thing I want to do, Install, does not work.if I choose upgrade option, it tells me to remove installation disk and start nnormally which I cannot do.
When I try to access Settings, I get the following error:
ms-settings:// The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
I tried the command-line suggested and right after I hit enter, I get a flash of a window popping up on my screen and then it's gone. It's so quick I can't see what it's trying to open.