Start up after installing Windows 10 and the final loading of start ups hangs up on NEC SpectraView II my monitor software color calibration as it continues to loop.
View 1 Replies
i have this problem since a long time ago , and i can't seem to figure out how to fix it!
i am sick of this file, the option of "Open file location" is grayed out for it !
Since 2 or 3 weeks when I switch on my notebook, after loading my desktop it hangs loading startup programs.When it hangs, I can't even shut down, I have to press the power button 4 seconds to shut down.It happened with my 3 notebooks, but it remains only in one of them.This problem remains in an HP EliteBook 8540w running Windows 10 Pro 64 bits. In this notebook I had uncheck the "Turn on fast startup (recommended)" when I installed Windows 10, because it didn't shut down properly.I don't know what to do, I tried SFC and DISM tool, both found errors but were unable to correct them.
View 5 RepliesOffice (2016) worked fine until I upgraded windows 10 to TH2 then stopped working and now crashes on startup. I have tried the quick repair and the online repair and even clean installing the program finding out that it still crashes.
View 2 RepliesI was using a 2nd monitor with win 10. then I upgraded to a better monitor. now, when I start a program, win10 still thinks the monitor is still attached and starts the program in the old monitor. is there a way to tell a program which monitor to start on?
View 1 RepliesToday i unistalled a program i no longer wanted to use but to tile remained on the start menu and it won't unpin or delete.
View 9 RepliesI want to delete a program and can't find the control panel. I've looked in settings but don't see it anywhere.
View 9 RepliesI have my TV connected to HDMI and a small, old monitor connected to VGA on a Radeon 4600 video card. I have Kodi (multimedia player) set to open full screen when the default user account logs in and it does so on the main monitor which is my TV. I have the smaller, older monitor set up so I can still use the computer when someone is watching a movie on the TV. I have multi-monitor set to extend the desktop.
But my problem is when I open a program it wants to default to opening on the main monitor and when I open a program from the second monitor, it opens behind Kodi on the main monitor (and I have to click and drag it over to the second monitor) - so I would like to switch the old VGA monitor to be the main monitor and the TV to be the second.
Is there a way I can force Kodi to open and stay on the second monitor once I make my TV the second monitor?
I have two monitors. One uses dual DVI cable and one uses DisplayPort. When the monitors wake up after a sleep, the apps on the DVI monitor move to the DisplayPort monitor. This probably has to do with the difference when Windows senses which monitor is active first.
Is there a way to stop the apps from moving? Is there a tool which restores the apps positions after a wake up?
I sent a feedback without adding enough details to make the feedback look useful, can I?
View 2 RepliesUsed to be able to do this in Win 7 by putting the shortcut in the startup folder. How is this done in Win 10
View 4 RepliesIn 'startup', i have a program called 'program'. what is it? Is it malware?
View 4 RepliesNoticed this under my startup programs but it does not show to be running. Should I remove it or what?
Uninstall C:Users\%username%AppDataLocalMicrosoftOneDrive17.3.5892.0626amd64
I want a program to start automatically on windows startup, Nothing needs to be done on the program I just want it to open up, can't see anything on the program's settings suggesting there is a way.
On task manager under the start up tab it says that it is enabled, although I have never seen it active even on the active programs list, I can't disable it either.
The program is Gigabyte OC Guru and I'm running windows 10. It's not urgent, just want it to start so the led on my gpu is the right colour.
I have a Toshiba laptop running Windows 10. My main display monitor is a LG 24 widescreen plugged into the laptop.
With Windows 7, I had no problems in using Fn key f5 to set the display to only the LG (showing as "CRT" on the screen). This did not change when I re-booted the laptop.
With windows 10, it reverts back to to the default setting and I get the laptop screen and the monitor lit up.. I frequently get a different resolution on the display too, until I open the laptop and re-set the display with the Fn key. This is annoying, as I use an external keyboard (which doesn't flip the Fn key) with the laptop lip down.
I've also tried via Control Panel (Display) but that doesn't hold the setting either.
Recently I have had a repeating issue with the (egg) timer running constantly. I have been unable to stop it or to close the current program or web page which appears to be involved. What is happening? I thought it might be due to RAM running too low but that does not seem to be the case --- I can keep a constant check on RAM and use utilities to free it up at will. So if not RAM, what is it and what can i do about it?
View 7 RepliesI'm trying to get a program to autolaunch when I start the computer.
Previously, I used Task Scheduler, but it does not seem to work. I suspect UAC is making this hard for me. I have it set to default.
How can I make a random program run at startup without issues?
My neice had a virus which I successfully cleaned out, but now every time I start up the laptop I get an error message that it couldn't load "C:Usersher nameAppDataLocalCall KitCallKit.dll" and I am having a real trial with attempting t identify what program is calling for the absent .dll file.
View 4 Repliesi got my new Benq 2411z and its really nice, configured everything.But my problem is the following:
The monitor does not show the windows startup anymore, so i cannot see windows loading and cant access bios menu at start.
Somehow in device manager there is a non-pnp monitor listed which is listed as standard, if i uninstall or deactivate it, it does not affect my problem and its back after restart.
Furthermore i cant disconnect this non existing monitor via windows control panel.
I need to set the benq monitor (shown as monitor 2) as main monitor in windows 10 settings, but it does not change anything about my problem with the start up.
When i start the computer the displays says: "no device found"
When the computer booted and is finally on desktop it says: "input: dvi" and the desktop shows
Moreover my CCleaner says i have "microsoft basic display driver", but i have got a gtx980..
Since there is no START folder, how do you set up an exe file to run whenever windows 10 starts?
View 3 RepliesI need Windows 10 to boot directly to a program. Whatever I try .vbs, .bat or just shortcut in Startup folder, it always starts minimized to task bar. When I click on the task bar it gets blown up full screen.
Once I turn off the Tablet mode it starts good, maximized.
How can I solve this so it boot in Tablet mode AND start the program in proper size?
NOTE: I use touch screen but I dont think it maters.
I recently installed windows 10 build 10162 and I installed every update for it and all of my drivers (that I know of).I was able to overclock my gpu no problem and was able to do that + cpu in windows 7.But for some reason raising my clock speed from 32 (3.2ghz) to 33 (3.3ghz) windows 10 decided to be autistic and bootloop everytime it reaches the logo.
SPECS:
GTX 750 ti OC
Intel Pentium g3258
msi h81m-e33
Corsair Vengence 1600mhz 8gb ram
Corsair 430watts psu
Western Digital blue 1tb hard drive
So today i suddenly got a bluescreen but thought it wasn't anything special so I continued using my pc.
A few hours later my PC shut down and when I try to turn it on it either instantly reboots after i get to the login screen. When it restarts it has had these messages:
attempted execute of noexecute memory ntfs sys
IRQL_NOT_LESS_OR_EQUAL
Windows 10
So the problem I've been having with Windows 10 is that it is constantly freezing on me and loops the sound over and over until it unfreezes. The computer is unresponsive and acts like it is about to bluescreen but it doesn't. After it unfreezes, it might display a notification that my graphics card driver crashed(Nvidia 353.63 windows 10 64bit). I would really like the freezing to stop and sometimes the freezing lasts up to 5 minutes or even endless!
View 1 RepliesWin 10 32 bit will only load properly with Ethernet cable. Discovered this looping issue when I moved the PC and went to use Wi-Fi. Plug cable back in and everything goes back to normal. Troubleshooter doesn't find anything wrong.
View 8 RepliesAfter upgrade to windows 10 it is not starting up ..it is in never ending loops of restart .it shows inaccessible boot device.. What to do now?
View 7 Replies
