Onboard Reinstall Boot Loop
Aug 14, 2015
Just reset Windows 10 on my laptop because I was unable to sign into my Microsoft account therefore I couldn't access Cortana or the Store or any of the new Microsoft 10 features. Everything else worked fine. So I started the reset process and chose the option to save all my personal files, and the process went smoothly until it got to the end of the installation. Now it looks like I'm stuck in a boot loop and it has been going on for about 12 hrs now. I am going to go to work and hope it is finished resetting when I come home.I loved Windows 10 so far, I just needed to be able to sign into my Microsoft account.
View 1 Replies
Similar Messages:
Jun 18, 2015
This is not my main system, but it's still annoying. Full clean install of evaluation build 10074 on this system:
Intel i7 Gen 1
EVGA MB
6x 2GB sticks of ram
Titan X nvidia Card
2x 250GB SSD in Raid 0
After the patch, which I can postpone, but not avoid, I get windows is repairing after update message followed by a reboot.
I have tried the following repair options:
system recovery, no image found... though I did attempt to create a restore point.
Windows Rollback
Refresh PC
startup repair
System Reset
..and whatever other options are on the install disk for repair. I have even installed and that didn't work. The only thing that seems to work is a full reformat of the drives. This happens only after a windows update.
While I would like to see how the new features work, Its not worth having to reformat everything and reinstall on my SSDs over and over. I also use this PC for when guests come over. This has happened to me 3 times. Each time after a full clean install, and each time after a windows patch.
View 1 Replies
Oct 18, 2015
I installed Windows 10 on my Win 7 HP Envy 4 laptop recently. A week later, the computer began running very slowly and the start menu and notification center stopped working.
Finally, I decided to do a clean reinstall of Windows 10, using the media creation tool and a USB drive. I was able to get the installation started fine, but after 20 minutes it hung on "the computer restarted unexpectedly or encountered an unexpected error." Attempts to hit "OK" and start again bring up the same message and the same circling dots. I've tried the regedit fix described on various sites, but regedit also hangs before I'm able to exit. Now the computer hangs on a screen asking for the Win 10 product key. No way to enter it even if I had it.
I'm at a loss on what to do now. The computer won't boot to safe mode. I can access the BIOS screen, but only the two first keys are responsive; trying to change boot order, for example, just results in the same reinstall error message.
Have I hopelessly bricked this machine? I'm not worried about losing files, but I'd sure like to get this thing running again.
View 1 Replies
Feb 23, 2016
Week ago I upgraded my windows 10. Then 5mins after that I got bluescreen on my monitor where reads something about KERNEL_SECURITY_PROBLEM. Only thing that i could do was restart so I restarted my PC few times cuz always when I tried to open my computer I got the same message so then it says that you could reboot your PC then i tried but my pc stucked to boot loop and had been like this a week. And I have tried so much different things. watching tutorials,forums,group chats but nothing works i have tried to go from safe mode install windows 7 or 10 but safe mode dont work i cant even open my window.
View 1 Replies
Jan 6, 2016
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7.
But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart Now. But I have no option to Use a Device. If I choose Troubleshoot then Advanced Options, the subsequent screen has no option for UEFI Firmware Settings.
I've disabled Fast Boot through Power Options in the Control Panel, then tried F2 and the Delete key when starting. Nothing...
The fact that I can't do something that was so easy in Windows 7 is enough reason in itself to remove 10. Throw in the fact that the scanner part of my printer no longer works is just icing on the cake. I have the Windows 7 disk. I just can't figure out how to use it.
View 9 Replies
Jul 31, 2015
I tried to update my Windows 8.1 installation on my Thinkpad T61p to Windows 10. It went smoothly until it finished copying the files (75% complete). It is now rebooting in an endless loop (reboot -> Windows logo with spinning circle -> black screen -> Windows logo with spinning circle -> 75% complete message -> reboot) and I don't know what is causing the problem. I have installed the latest BIOS and tried various changes to BIOS settings with no effect. Does the installer write any kind of diagnostic log that would tell me the reason for the reboot loop?
View 7 Replies
Jul 31, 2015
After installing windows 10 on my asus laptop yesterday, last night I tried to wipe my laptop by resetting it, i left it at 1% before i went to bed and this morning it was still at 1% so i did a force turn off and when i turned it back on , it got stuck in a boot up loop where it would just keep on restarting [URL].
Safe mode doesn't work, nothing works, except the power button. What should i do? i didn't want to bring it to asus because the warranty expired 2 months ago.
View 1 Replies
Oct 30, 2015
I have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
View 9 Replies
Aug 4, 2015
i can't install windows 10 to my 5-year-old laptop...
rebooted computer then stop boot logo.. there is nothing happened.
i trying two ways: MediaCreationToolx64.exe with USB, windows update. but same situation.
View 1 Replies
Aug 9, 2015
Last night I was trying to watch some good ole' dragon ball z. When this site gave me a virus. I tried system restore and was denied. So I hard reset my PC which I just upgraded from 7 to 10.
The reset was stuck at 50% for about an hour so I turned off my PC and flipped it back on to see if it'd retry the installation.
To my surprise I'm stuck in this loop where my computer shows the boot up dell xps screen and then restarts. F8, F9, F11. NOTHING WORKS. I can't get to any recovery screen like I could with Windows 7. I don't have a disk because it was of course the free upgrade on July, 29th. Also can't burn one due to not being able to get to my Desktop.
View 1 Replies
Aug 13, 2015
Alright so, i installed windows 10 had it working for about a week my graphics card was away for repair and when i finally got it back i tried installing it only to discover my PCI slot on my mobo was bad. So i ordered a new mobo when i got the new mobo in the mail i installed and powered on my system the usb drivers were working fine. I still popped in the install CD for audio drivers about mid install of the drivers i leave the room and come back to discover windows 10 had reset itself and was installing "updates" at about 55% it completely froze i left it alone for about an hour before I rebooted.
Upon rebooting i discovered none of my usb ports work it appears the driver install got eliminated mid installation. So my pc was just stuck there on the new annoying mandatory log in page Luckily my Mobo had a ps/2 slot so i had to travel all around town to thrift shops and pawn shops to find a ps/2 keyboard, success i got the keyboard and j signed in! Time to pop in the drivers CD and reaccomplish it! Only one thing... Windows says "failed to install update"*instant reboot* by the way my only internet access on this PC is a wireless usb dongle
View 1 Replies
Aug 4, 2015
Ok so basically, after successfully installing windows 10 from windows 7, I decided to clean my hard drive and reset windows because I deleted my "edge" and thus my apps were not working. The problem then started, the reset went fine until it reached 64% and read "configuring settings" then it just restarted my PC and went in a loop like this;
>startup
>bios screen (Asus/Intel)
>monitor turns off
>monitor turns back on
>blue win10 logo and loading circle
>black screen for 5-10 secs
>install screen displaying 64%
>restarts and loops
View 7 Replies
Feb 15, 2016
I woke up this morning to a constant boot loop into blue screen that gives me a memory_management blue screen error and restarts then occasionally gives me a driver_corrupted_expool blue screen.
It tries to start up automatic system repair which fails and works very rarely. Once i am in the system repair screen i try the startup repair and it just doesn't do anything and redirects me back to the blue screen boot loop. I had restarted my PC this morning after it was working and then it just randomly started doing this boot loop.
I need fixing my issue with a bootable USB program i can use to fix the drivers or something. I need every other option other than reinstalling windows because i have tons of files i need on here.
View 16 Replies
Aug 25, 2015
I did a reset on my windows 10 laptop and since then when I turn on the computer, a blue screen appears which says inaccessible boot device and the computer restarts itself and the blue screen agin.. I tried to creat media creation on a memory stick and boot the computer from stick, but the memory stick is not recognised, the only option in the boot menu is windows boot manager.
View 5 Replies
Sep 4, 2015
I built myself a new computer recently and it boots fine if I am booting into the bios. However when booting off my thumbdrive to install windows 10 it boot loops, getting the the windows symbol and then restarting.
My setup specs:
b85m-ds3h-a mobo
pentium g3258 cpu
msi 4gb gtx 960 gpu
hyperx fury 8gb 1866mhz kit
corsair cx500 psu
wd blu 1tb hdd
View 1 Replies
Jul 31, 2015
So this is not my personal computer, but this is my mom's computer. Its an HP Slimline Desktop computer, not sure about the exact model but it is running with an AMD Athlon X2 B24, 8GB of DDR3 RAM, AMD R5 240 and a Corsair Neutron 120GB SSD.
Everything was working fine when it was running a legitimate OEM copy of Windows 7 Home. However, after the Windows 10 upgrade process, it got stuck in "Welcome Back" Screen and she told me after she clicked "Next" the cursor started spinning, and it rebooted. Now after checking it, Windows wouldn't load to the desktop, it would just go on a bootloop and blue screens.
She didn't back anything up before the upgrade. I do not know what to do.
View 1 Replies
Jan 6, 2016
I was given an error message on reboot and followed a guide to editing the registry to restart the download. The download did not restart however, and my windows 10 is stuck in an endless loop of rebooting. I have downloaded a copy of windows 10 and put it onto a USB, but when I try to boot from USB it takes me back to the BIOS. The BIOS are 'Aptio Setup Utility 2011', and don't seem to allow me to change from UEFI boot to LEGACY boot, although the option is apparently there. Why the USB boot is not working correctly and how to make it do so, I am more than happy to reformat the computer but at this moment in time it's useless. The computer is an Alienware x51 from 2011. As previously mentioned the operating system the PC is trying to boot (or install) is windows 10.
View 4 Replies
Sep 8, 2015
I keep getting the "Automatic repair" at boot time and then it diagnoses and later it says it failed.
I've checked several forums now regarding this error, I've tred the following :
1. I tried setting the recoveryenabled to No in using bcdedit. No use.
2. Tried rebulding bcd, No use.
3. Tried resetting by choosing "keep my files" option{Because they are important and I've several programs installed which i don't want to lose).
4. I did chdsk on all drives.
5. Even though I've restore points, it says no restore points found.
View 1 Replies
Aug 10, 2015
How to be able to get to the login screen and actually log in by booting through a USB. But then when I try to revert, it restarts and when it reboots. It gets locked in a screen that has a blue Windows logo and a black screen with nothing else.
View 3 Replies
Nov 1, 2015
Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
View 9 Replies
Aug 10, 2015
I had a virus in my laptop so I reset my laptop to find that it's stuck in the INACCESIBLE_BOOT_DEVICE loop. I don't have any Windows disk to put into my laptop. My laptop is an Asus g750jx.
View 1 Replies
Jan 7, 2016
Upgraded to Windows 10. Was working fine now NTFS_FILE_SYSTEM error boot loop. How do I get a repair disc to repair windows?
View 1 Replies
Jul 31, 2015
Original post [URL] ....
So I force-restarted my computer to hopefully refresh the system but I just got back into the loop. It may be a conflict with some files but for now it's never-ending. What should I do?
View 1 Replies
Aug 13, 2015
I recently upgraded to Windows 10 without a problem, but after a while I thought; why not do a clean install? I went ahead and tried to perform a clean install from the windows 10 settings, and chose all drives, and a quick reset.
It then started the process, after which it crashed with a BSOD telling me something went wrong and that it would restart. After that it kept restarting, sometimes with a BSOD, sometimes just freezing on the windows 10 logo. There were different BSOD errors each time it would crash, I can't remember all of them.
Some of them were along the lines of a driver stack overrun, some were telling me system32/winload didn't exist.
We tried a system restore from USB, but there was no difference. We tried going into the BIOS menu, sometimes it worked, sometimes it froze, and we made sure that the USB would be the first the PC would boot from. Still no difference.
At this point the PC just froze on the windows logo, still trying to initialize the system reset I think. I unplugged the drives and plugged them into my laptop to check what was wrong, and both drives were wiped, with nothing left, no hidden files.
Only with both drives unplugged, the PC would give me something different, an error saying that there is no operating system, which is obvious, so I don't think it's the PC, but windows that is generating this problem.
I tried booting from USB multiple times, with a system restore on it, a windows 10 installation on it, and a windows 8.1 installation on it, since that is what my PC started with.
View 3 Replies
Aug 16, 2015
I have a problem, I installed windows 10 and now I'm stuck in a boot loop after attempting a reset to wipe my files in hopes to make things a little faster, and now I'm unable to do anything other than enter the BIOS.
View 1 Replies
Sep 19, 2015
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
View 4 Replies
