Win 10 was working well on my Toshiba Satellite.(i7 4 gig ram).Then I lost the ability to download with Cannon Camera software. This program stopped working. ( got off pictures by removing SD card and putting it direct in laptop.)Next computer slows down and run st 55 to 60 Deg C. (air temp about 23 deg and desktop computer running at 35 deg.)
Then Blue screen telling me Video_Krnl............ failed/error.Ran restore point and system worked again for a while(2 days).Now I can only get 3 to 4 minutes before blue screening and failing. Have blown out cooling fins but little to no dust as computer is only just one year old. Regularly run AVG and Wise 365 cleaner over it.
I tried the other day to search for a program on the start menu and it worked fine. I then set up Cortana for speech mode and all I get now when typing in the box are four blue dots scrolling at the top of the search box.
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
Mic stopped working after windows 10 update. I can't raise the db levels and it does not record any sounds. Its like its muted all the time, but i cant unmute it. Its an HyperX Cloud II if that matters.
This morning when i turned on my computer the sound was not working.I reinstall all my sound drivers, i reboot my computer a lots of time, i cheked if everythings was pluged correctly and everythings was supposed to be fine but the sound don't work !
Recently i have upgraded to Windows 10 from Windows 7. Everything was fine the first hour, then all of the sudden the mouse stopped working and it was no where to be seen. The mouse that I use is an old Logitech mouse that has a ball to control the mouse. So, I plugged in another mouse and it was working, but the clicks were backwards.
Recently discovered Windows Explorer stop working. Ran SFC /ScanNow result were some flies were repaired, which directed me to C:WindowLogCBSCBS.log, nothing found there. What to do, it was only by accident I discovered it was not working, no error messages or any signs.
The start button on windows 10 has stopped working for me. It came right after I installed a new graphics card though in the days before I had noticed strange stuff like when I searched for an app and clicked on its icon within the start menu nothing would happen. File explorer, settings etc stills works but are very slow.
I Tried to connect to my 2 other PCs this morning. I just get a screen where it says it's 'Initialising Display parameters' but will not get past this screen.
Was working perfectly yesterday! I can take control of these same computers if I try it from my Linux Ubunto PC. So that rules out the network and all of the other PCs which are still on win7
My start menu stopped working several weeks ago and I have been trying all the suggestions found of the various forums with the exception of reloading Windows 10. It looks like Microsoft should be responsible for publishing a solution to this problem realizing how many people are having the same trouble.
I have a Logitech wireless keyboard that uses a USB device. After a update on the 10 of March my keyboard stopped working. I have tried another wireless USB keyboard Mircosoft and a a wired Microsoft keyboard without success.
I have followed a few of the suggested fixes after doing a search without success.
On October 29 the start button and the Windows 10 taskbar stopped working. I have called Microsoft tech support and chatted online five times but they have not been able to resolve the problem. Windows 10 worked alright for over a month, but then this problem occurred. I believe there was a Windows 10 update around that time.
my most used App the Windows Weather app has stopped working, I click on it to open and it open and then closes again right away. Is there anyway I can fix this? Is it a common Win 10 app system fault with the app or is my PC specific that has the problem?
After upgrading to Windows 10 on my sony laptop my mouse will not come back on the screen after I close my laptop and the computer goes to sleep. I have to restart my laptop after every time my computer goes to sleep to get my mouse back on the screen. Just checked DM and the touchpad drivers are current.
My laptop has failed, the hard drive has stopped working, my question is having purchased a 750gb replacement drive can I download win10 directly to it using my tablet and an external drive then install the drive into my laptop to complete the installation.
I installed the Windows 10 beta from Window 7 a few days ago. I installed all the recent updates. Everything was working fine but then yesterday, I watched something on YouTube for about an hour and at that point the mouse became unresponsive. I've tried everything I can think of but nothing works. I've shut down, re-booted, gone into the bios but with no success. Windows 10 will open but the mouse remains unresponsive. I even plugged-in a brand new mouse but that hasn't worked at all.
I have another hard drive with Windows 8.1 from my other PC that has a defective motherboard and out of frustration, I installed the drive from that PC on this one. It works but sometimes I have to re-boot my PC a few times on start-up and then if I leave a browser open for a while without activity, the browser becomes unresponsive and although the mouse cursor works, it is not able to do anything.
I installed Windows 10 on my laptop few days ago and today the internet just stopped working. I uninstalled network drivers and reinstalled them but now there is a yellow triangle showing that connections are limited. Both Wi Fi and Ethernet doesn't work. Any workaround other than refreshing?
I'm running a custom built PC with win10 and an ASUS P9X79 WS motherboard.
I did a free upgrade from windows 7 ulti to win10 pro, everything was smooth for a month on win10, and the whole year prior with windows 7, it was built within a year ago.
So these updates appeared in the win10 update section:
Intel - Other hardware - Intel® Xeon®Â E7 v2/Xeon® E5 v2/Core i7 Power Control Unit 2 - 0EC2 Intel - Other hardware - Intel® Xeon®Â E7 v2/Xeon® E5 v2/Core i7 Power Control Unit 3 - 0EC3 Intel - Other hardware - Intel® Xeon®Â E7 v2/Xeon® E5 v2/Core i7 Integrated Memory Controller 0 Target Address/Thermal Registers - 0EA8
As well as many more.
I clicked to install the updates, then nothing happened, i let it sit over night, woke up still nothing. Restarted my PC and boom.
Asus bios screen says CPU overheat/CPU fan not working. I ignored them so it would boot and here I am. I included a JPEG of speedfan's stats on my PC, showing no fans operating, as well as high temps on core 0 and such.
I then worried maybe it's unsupported and I made a rookie move doing that update. Sure enough I went online and the ASUS website indicates no support for win10 64 bit drivers for my motherboard.
Now I'm wondering how to undo such a thing, I really don't want to use windows restore, as it says it will erase ALL my apps no matter what. Which is strange to me as windows 7 was able to revert back without getting rid of a single app. I'm also wondering if there's another restore function I'm unaware of that doesn't require deleting everything I've installed app-wise.
Earlier today I was playing my usual online game when suddenly the sound stopped working. It had been working just fine earlier and I hadn't changed anything except maybe updating Adobe Flash. After a while the sound suddenly came back and then it disappeared and hasn't returned. I've been looking through all the Device Manager and Sound Control, but nothing seems to be working. When I slide the sliders in the volume mixer Speakers/ Headphones and System Sounds lights up green. In the sound panel on the speaker icon there is a green check mark. This is all happening on my pc not my mac. So I'm not sure if I pressed a button during my gaming or if adobe flash might've messed up something. I've posted this thread here because everything I looked up points to Drivers, but to me it seems like they're working???
I'm not sure if it's related to the last update or not, but suddenly my homegroup started saying my other PC was offline. So I went and left it and recreated it, and sometimes it'll connect for maybe 5 minutes then disappear again. Also, it's saying almost everytime I try to join that Windows No Longer Detects a Homegroup on this network. Very strange since it's showing it. I can get to the other computer via the Network icon so it's not a disaster, but this is a frustrating issue.
i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.
