saw other post about Crashing without BSOD, and i followede some of the steps other people had to no luck. screen turns black, says no signal(one says no VGA and other say no HDMI), sounds cuts off, PC is still on, Lights in mouse and keyboard have to shut down the pc manual no BSOD.
ad the problem for some time now. first time i got them was in the Starcraft 2 legacy of the void, in some of the cutscenes, but only in the cutscenes, and now i have it again in blade and soul. sometimes at the login and sometimes when i enter the game(Cutscene). URL....starcraft was random times some cutscens were ok, some not, What i did was instant esc and watchede the cutscene online if it crashede) every other game i played/tryed i never crashede like this. WoW fallout 4 so on.
specs:
GPU: AMD radeon HD 7950 3GB
CPU:Intel Core i5-3570 @ 3.40GHz
Ram: 8GB ddr3 1333MHz
hard drive(s) 1: Samsung SSD 840 series 250GB
hard drive(s) 2: 500GB (SATA 6Gb/s) 7200RPM
mainboard: ASUS P8B75-M
PSU:XFX PRO XPS-550W-SEW
Windows: 10.
what i have try'ed so far. update all drivers,(also BIOS)removing mouse/keyborad/headset from usb(when the game was in loading scene to the cutscene removeing Ram blocks,MemTest did a Verifier /standard /all in CMD crashed(got minidump file) HW monitor C* on pc, GPU never came over 65, CPU never over 70 no overclocks Checked Voltages seems to be in range,
use WhoCrashed to read the DMP file.
On Wed 20-01-2016 19:42:35 GMT your computer crashed
crash dump file: C:WindowsMinidump12016-4453-01.dmp
[code]...
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. URL...
I'm running Windows 10 64-bit and whenever i right click on desktop the screen turns black. Check out video for more details(The video is in windows 8.1 but the problem is the same and still persists).
I have freshly formatted my computer, installed all the updates and drivers, I have also RMA'd my video card (which i thoroughly tested and found it works fine on other computers.) but I cant figure out why my screen goes black but the computer keeps running. I can hear my music still playing and I run a dual monitor setup but when my screen goes black both monitors keep bouncing around the "Analog / Digital" box and thats all i can see, i have tested the monitors on other computers and they work fine as well.
My computer screen turns black sometimes when I leave it for a minute. When I press the power button it doesn't turn on, to get it working again i need to hold down the power button for 20 seconds then press the power button again.
So I was in my bios and I changed my CPU mode offset sign from + to -, I saved the settings and exited. When the PC restarted it came on perfectly fine but I am getting no signal on my monitor and my razer keyboard & mouse aren't coming on or lighting up.
My motherboard is a P8Z77-V LX My CPU is a Intel Core i5 3470 3.20Ghz. My RAM is G.Skill RipJawz 1866mhz 4 X 4 My GPU: Asus GeForce 660ti DirectCU II OC Edition.
I googled around and it said to take the battery out for 10 seconds and put it back in, I did that and no change, I also took the jumper from 1-2 and put it on 2-3 for 10 seconds then back again, Again no change.
Ive reseated the RAM/GPU and CPU and nothing seems to be working.
The pc turns on fine but nothing seems to be working.
Even my Corsair H80i pump LED changed from white to pink which is the colour I set it. All fans are working too.
Why I changed my cpu offset mode, Before this issue I just had a bluescreen for WHEA_Uncorrectable_Error, I turned my PC back on and I googled around and it said it was something to do with my CPU voltage, and one person suggested to try and change it from + or auto to -, So I restarted my PC and changed the cpu offset mode from + to -, after that it doesnt seem to be working and im not quite sure why.
What I can do to try and solve this issue or should I just order a new motherboard?
Sometimes, when I shut down or restart Windows 10 64-bit, just before the screen turns black it makes the critical stop sound effect. It does not effect anything, the whole shut down process is like 3 seconds, which I really like in Win 10.
Nevertheless it bugs me a bit, I also had this sometimes in Win 7. I'm not running any programs while shutting down, it would notify me if I did.
while playing video (using any software media player, movies & tv, internet explorer youtube, google chrome youtube, vlan), all other inactive windows (any other windows) turn blank and white. I have updated video drivers, did not make a difference. I have then uninstalled all video card driver and used only default windows drivers, played video with same result. Therefore, I am sure it is windows. Tonight while trying to watch the bowl games, I typically watch video and browse/study using IE/Chrome. This is pretty typical for me, but the browser windows turning black and white is getting really annoying.
I reinstalled windows the day before yesterday and since then every time I turn my laptop on after entering my password the screen turns off for like 2 seconds then turns back on. This have never happened to me before. I tried putting my old windows back via Macrium Reflect and I even tried reinstalling it again but neither of those things worked. I have an Acer Aspire V3-572g laptop.
I've just upgraded my win 7 installation to win 10. The power and sleep setting was carried over, turn off screen after 5 minutes, but the monitors stay on forever. I checked the network adapters in the device manager (BT personal area network, BT RFCOMM, Realtek PCIe GBE family controller) but none of them had power options or anything related to waking up the computer.
I'm using a Packard Bell Easy Note TE Laptop (forgot the actual model number), upgraded from window 7 to Win10. After 30 minutes from logging in, the screen turns off regardless of whether I'm using it or not and brings me to the log in screen, just as if I put it to sleep or something.. It doesn't seem to matter if it's plugged in or not and it doesn't matter what I do in the power settings.
I've had an issue with my laptop : it randomly turns off when I play some games without even a blue screen or a crash of any sort. It only happens with some specific games and happened a few times on each, something like once every several hours.
The games I've had these problems with are World of Warcraft, Call of Duty 2 and Civilisation 5. At first I thought this could be caused by some sort of exception unhandled by my processor, but it would give me blue screens, not just my computer turning off.
I've read online that it could be caused to overheating but WoW worked just fine when I was using it on the same laptop with windows 8.1, and amongst all the other games I play on this pc, WoW, CoD 2 and Civ 5 are really not the ones that use the most resources.
Note that it doesn't turn off like it would by just shutting windows down, there's no windows 10 shut down screen or anything at all and the programs running don't close before. It just goes black instantly.
Recently I have wired to screens up as dual screens, they were working fine at day 1 but after the left screen (main monitor) has started turning itself off completely.
As soon as I boot, the screen goes black and I am greeted with the screen startup logo, then "no signal detected" Windows will only pick up the one screen (right monitor) until I restart the screen from the plug. My main monitor is connected via HDMI from the GPU into the screen, and the other DVI to HDMI adapter, again from the GPU, The weird thing is no matter what I try, it will always be the left screen, I have tried:
Swapping the screen over with another Changing plug sockets, System Refresh Swapping screen power supplies installing drivers swapping HDMI cables
I can only assume it's something to do with Windows, but what is it?
So I upgraded to Windows 10 and I was using it and shut down my computer. Now my computer turns on but won't load anything. It shows the windows loading screen for about 5 seconds and then goes blank and sits that way till I turn it off and restart.
I have an ASUS UX303ln with a clean install of Windows 10 in UEFI boot mode. It seems that: when I turn off the computer it turns off the screen and fans, but stays on, consuming an unusual amount of energy (in about 30% of the cases it actually turns off properly)When I hibernate the computer, same thing happensWhen I put it to sleep, in about 60-75% of the cases it won't wake up, instead it will just enter this high power mode with screen off, mentioned in the first bullet point.
These issues persist, even after turning off hybrid sleep, fast startup, hibernation, changing over to CSM boot, trying to downgrade/update drivers for Intel Bluetooth (which sometimes was stopped by windows due to not being Windows 10 compatible), the Management Interface, and Intel and Nvidia drivers.
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter 2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot) 2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor) 3. Extend (still black screen and cursor) 4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
I don't know what to do. I've tried everything. I am literally about to break down crying. I've been at this for six and a half hours now. I've completely run out of space on my 320GB hard drive, and I've been trying to clone to my new 1TB since I got home from work.
I've currently got windows 10 on a small HDD that I need to transfer to my newer, bigger drive. I do have multiple hard drive slots, as I need the OS on the big one. Don't ask why, it's complicated. Point is, I can't use the little one anymore and I need the OS as well as my files on the big guy.
I've tried 2 different cloning programs, each one taking ages to finish copying. The problem is, everywhere I go says the reason I have blackscreen when I try to boot is because I'm missing the 100MB hidden boot partition. But it's sitting right there.
I've tried booting with only the new HDD installed, tried 100 boot and BIOS settings, different slots, completely formatting the new HDD and starting over from scratch with the same program and a different one.
I've even tried booting from a recovery disk. That won't work either, and gives me the same black screen with a single horizontal bar blinking in the top left corner.
When I boot my pc sometimes I get a black screen. But by pressing ctr alt & delete I can log out, and then login and its then OK. I have reset my pc but its still the same.
