My mouse has this crazy glitch since upgrading to Windows 10. I'll be scrolling and it'll stop all of a sudden and freeze for about three seconds. How can I fix this?
View 1 RepliesMy mouse and keyboard were doing fine with Windows 7, but after I upgraded to Windows 10, my wired mouse and keyboard have been prone to just randomly stop working for a few seconds before working again. When it happens to my keyboard, what key I had been pressing would be typing over and over again, while my mouse is stuck in place (screen is not frozen, videos keep playing, etc). In addition with the windows 10 upgrade, I also got a new graphics card at the same time, but I don't think a graphics/video card could be responsible for this kind of thing, right?
Hardware Information:
Mouse: Corsair Raptor m40
Keyboard: CM Storm QuickFire Rapid
Graphics Card: Sapphire Dual-X R9 270
I have no viruses/malware, and when I go to the devices manager and try to update the "HID-Compliant Mouse" driver online, it seems like it's the recent driver. Same for the keyboard. Therefore, I'm leaning to the Windows 10 to be the culprit, but I'm not too sure.
I just got a second hand laptop - Acer V3-771G with an Elan touchpad and I put a new SSHD hard drive in it and installed Windows 10 fresh.
I see lots of issues with ELAN touchpads but it seems as though Microsoft has produce one that installs and fixes most scrolling issues.
However, I have a strange one. When I enable vertical scrolling in the driver, it works as long as the mouse is active - and for up to 5 seconds after. But when I stop using the touchpad and go to scroll again after 5 seconds, it doesn't work anymore! It's like it disables it after inactivity - but only 5 seconds?
I've uninstalled and reinstalled drivers, tried various versions - but of course Acer doesn't support Windows 10 on this older model laptop (circa 2012) so there are no specific drivers for it on their site. Everything works except for this scrolling after 5 seconds - which I can recreate every single time.
How can I get my mouse scrolling. I can't use it on my laptop since downloading 10
View 5 RepliesIs it possible to enable 4 way scrolling with Apple Magic Mouse on Windows10? I loaded the drivers from Bootcamp which enables 2 way scrolling. The only drivers I have found that work well are from Parallels on my Mac. Trying to enable the same capabilities on my PC with the Magic Mouse.
View 1 RepliesFor some instances, I do have a long right click context menu which causes it to require clicking the 'up and 'down' buttons respectively to see the hidden options. However, a mouse scroll is more convenient. I have tried various makes of mouse but none of them seem to be able to enable me to wheel scroll in a right click context menu.
View 1 RepliesI have been getting random BSODs, sometimes they happened 3-4 times a day and sometimes I will not have one for 3-4 days. Also sometimes my computer will just freeze, mouse cursor and keyboard not working and I have to hard boot. Also some times when it freezes, a stutter/buzzing noise is head through my headphones. Attached is the files
View 9 RepliesI have a problem with my mouse. For some reason, my razer mouse keeps freezing when I'm using it. I can use it for maybe 30 seconds, and it will cut out in 10 seconds, and then come back. I have used this mouse in about 2 years without a problem, but it started occurring about 10 days ago. I don't know if the mouse is broken, or if it's installed incorrectly.
View 1 RepliesI had to reinstall from scratch Windows 10 Enterprise 32-bit on my Dell Venue 8 Pro 32 GB tablet. After the first installation, the Bluetooth keyboard and mouse (both work fine under Windows 8.1), disconnected after 10-12 seconds. However, probably after one of the automatic updates, they started working normally (it took about a day or so).
Now, after the 2nd Windows 10 installation, the problem with Bluetooth keyboard and mouse reappeared. I forced the Windows updates, but no luck.
It's curious because, if I keep the Settings window active, on the Bluetooth page, both the keyboard and the mouse work. If I minimize the Settings window, after about 30 seconds, both devices stop working. If I close the Settings window, or move to a different settings page, both devices stop working immediately.
I have changed the Bluetooth Support Service from Manual to Automatic, but it did not work. Running the Hardware and Devices Troubleshooter did not work either.
Is there a way to stop the middle mouse button (i.e. click of the scroll wheel) from opening Cortana/search?
Things I've tried:
1. Searched Google. No useful results. The closest I found was that Windows 10 may be confusing the click of the middle mouse button as the 3-finger tap on the touchpad - which opens Cortana/search by the default. But I don't have a touch pad. I have the Toshiba PX30T (Toshiba Qosmio PX30t 23 inch Touchscreen All-in-One PC - Black/Silver (Intel Core i3 3120M 2.5GHz Processor, 8GB RAM, 1TB HDD, DVDSM DL, LAN, WLAN, BT, Webcam, Integrated Graphics, Windows 8 64-Bit): Amazon.co.uk: Computers Accessories).
2. Tried re-configuring the middle mouse button in (a) Windows 10 Settings > Devices > Mouse & touchpad, (b) Control Panel > Mouse, and (c) my desktop's manufacturer's System Settings utility application (upgraded just now from their website). Interestingly, none of those three configuration tools had any control setting for the middle mouse button.
It is obvious that Windows 10 doesn't "fully" support the wireless mouse that comes with my PC.
Is there a way to "unbind" the middle mouse button from opening Cortana/search? For example, via the Registry Editor - maybe?
I have been having this rendering issue for more than 3 months now and it persists after several OS re-installs.
Resolving this problem is of extreme importance to me since many of the programs I rely on are affected. Reverting to an older Windows version is not an option for me.
Affected programs:
Mocha Pro 4.1.3, IDA Pro 6.8, VLC Player & qBitTorrent (all versions)overall countless new and old programs affected
How to reproduce:
I can reproduce it successfully every timeMove the mouse from one sub-menu item that expands (SS1) to another (SS2) for a few times (usually around 10 is enough)It can also happen by interacting with any other UI elements in the program (although takes a few more clicks)
SS1:
SS2:
Facts:
Mouse stops highlighting any buttons or menu items in the whole program - if you hover over anything that's supposed to have a hover action (like these menus) - nothing will happen, as if the mouse isn't thereClicks will also only work in less than 10% of all scenarios'Ghost' menus (only the shadows of the drop-down menus are visible) will as well start appearing from some hover actionsUI of the affected program suddenly becomes very slow, laggy and choppy when the bug is triggeredEvery program effected by the bug will not exit properly no matter what and the process will stay running forever, unless closed via task managerThe only solution is to restart the program
Troubleshooting done:
old versions of the same softwarenew versions of the same softwareall compatibility settingsall possible integrated and dedicated GPU drivers (from both laptop manufacturer websites & official websites)fully disabling Windows animationsre-installing my computer 3 times
My guess (as of 4th of January, 2016):
I think that the hovering effect of the mouse gets 'stuck' in one place (the place where the glitch initially occurs) and it stays there forever, despite the movement of the actual mouse.
Screenshots (just a few of the many problems):
IDA Pro:
Mocha Pro 4.1.3:
I just recently updated. I then created a boot disk and performed a clean install. I use a Razor Black Widow Ultimate keyboard and a Logitech G9x laser mouse. I can reboot, I can shut down and restart and everything seems to work fine. But, after leaving the pc off all night and start in the morning I have no mouse or keyboard. This has happened Saturday morning, Sunday morning and yet again today. Fortunately, I have Acronis backup of my install, so when this happens I just re-image the hard drive and start searching for solutions again.
I have the latest Logitech mouse drivers and running Razor Synapse for keyboard software.
The latest thing I have done is disable fast boot but have not had it shut down long enough to see if it fixes the issue.
I decided to make the jump to Windows 10 from Windows 8.1, and I have to say, the design looks simpler to use, but this new OS software has done something with my touchpad. Originally, on my Windows 8.1, I was able to scroll through whatever web pages or folders in my computer with one finger using my touchpad. With this new update, initially, I thought it broke my touchpad completely, but the problem has been narrowed down to having to now use two fingers to scroll in the most awkward way as this touchpad doesn't seemed to be designed for two finger scrolling. Is there a way for me to change this back? Would I have to revert back to Windows 8.1 to get my one finger scrolling back?
The laptop I am using is a Gateway NE56R34u, and the touchpad is an ELAN.
I am having problems with me Mouse and key board, on boot up they will turn on for about 20 seconds then turn off. Then a error comes up,inaccessible_ boot_drive. But if I restart my pc the mouse and keyboard will do the same thing but instead of the error I get, choose keyboard layout, and a list of options but I cant choose them because the mouse isn't working. This all started happening after I upgraded my power supple but I when I put my old power supple in I had the same problem. I have windows 10and I have tried using different keyboards and different usb ports.
View 1 RepliesI have this habit of writing down quick notes on my desktop on an empty folder kind of to use as a sticky note. I noticed all my folders got deleted somehow this morning.how I can recover the folders and why they disappeared all of a sudden?
View 8 RepliesAll of a sudden everything on my screen is bigger. How do I get it back to normal?
View 3 RepliesI was looking at a video on youtube, didn't do anything, all of a sudden the sound goes out. I make sure nothing on youtube is muted and it wasn't. So I right click my "SPEAKERS" icon (I'm wearing headphones) I click SOUND, then I click the SOUND tab, and the "test" icon is greyed out, meaning I can't click it. I haven't had sound in 3 days and nothings muted.
View 1 RepliesI had almost 300 g of 500 g free and suddenly it went to under 100 g. I did a system restore from before the memory loss and it is still there. can I find these 'files' and delete them or what is the problem?
View 3 RepliesYesterday, out of the blue, I was no longer able to left click on a folder to open it. If I right click and then choose open, it will open. I get the error message:
I have not made any changes lately and I don't know what could cause this as I have never experienced this on any version of windows. I am running Windows 10 Enterprise on my Dell XPS 8100 with an Intel i5 Processor at 3.20Mhz and 8 GBs of DDR3 RAM, and a 1 TB HDD which is about 1/2 full/empty.
I am running Windows 10 Enterprise on my Dell XPS 8100 with an Intel i5 Processor at 3.20Mhz and 8 GBs of DDR3 RAM, and a 1 TB HDD which is about 1/2 full/empty.
I woke up this morning to a constant boot loop into blue screen that gives me a memory_management blue screen error and restarts then occasionally gives me a driver_corrupted_expool blue screen.
It tries to start up automatic system repair which fails and works very rarely. Once i am in the system repair screen i try the startup repair and it just doesn't do anything and redirects me back to the blue screen boot loop. I had restarted my PC this morning after it was working and then it just randomly started doing this boot loop.
I need fixing my issue with a bootable USB program i can use to fix the drivers or something. I need every other option other than reinstalling windows because i have tons of files i need on here.
One of my computers has suddenly lost internet access, and as far as I can remember all I was doing last time I used it was going on the internet to websites I normally go to. All other computers and devices are fine. The computer in question says WiFi is connected, but no programs can access it including Google Chrome, Microsoft Edge, and my VPN. I haven't noticed any other problems on that computer.
Here's what I've tried so far:
Troubleshooting internet connection - no problems detected
Scanning with Webroot - no threats detected
Turning OFF Webroot - no change
When I try to access a website with Google Chrome I get the error message DNS_PROBE_FINISHED_NO_INTERNET.
I've been in the Windows Insider program since it started, getting every new build, and I usually hibernate my PC to keep all my apps open, only rebooting for updates that need it.
This has been fine on Windows 8, 8.1 and 10, up until the November update. I downloaded the initial, "faulty" November ISO with the media creation tool, but didn't get round to installing it until after it'd been pulled and reinstated. So I used NTLite to integrate that update in to the ISO I already had and did a clean install of that.
Everything was great until the next morning when I turned it on again. It booted as normal until it got to the Windows boot screen, which flashed on screen for 1 second or so before the PC just instantly powered down, like someone had pulled the plug out.
I troubleshooted this for ages and eventually worked out it's hibernation and fast boot - the only way to make the PC boot properly again is to go in to the BIOS and change the amount of memory given to the integrated GPU so you're effectively changing the hardware of the machine, which makes Windows dump the hibernate images and boot from scratch.
Up until recently Ive had a steady and stable internet connection on all devices, however recently on one laptop the connection is now incredibly slow (multiple tests on bandwidthplace.com show download speeds of 0.1 Mbps while on another laptop connected to the same connection shows over 7mbps). Connection to my android phone works fast too, I don't know what is making this happen, Ive tried resetting the router, refreshing the connection, releasing/renewing the ip. Not sure what to do here, as I don't have this problem connected to other networks, and other devices on this network aren't experiencing the same issues.
I also updated to the latest available driver from my manufacturer's website and I'm not 100% sure if I have all the latest windows updates since the connection is barely sustained, but I believe I do as I frequently manually check for updates in addition to automatic updates being enabled.
Additional info
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:UsersJean Pierre>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : JP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[Code] ....
Lately , like in the last week or two, it just restarts in the middle of whatever I am doing. checking the fan... and will clean it out.. but its been recently cleaned and scanned numerous times.. I should at least get a warning screen or something....
View 1 RepliesAll of sudden Application and even print window is opening full Page thus I am not able to click even buttons like Accept, Next, Finish, Print etc which are overlapping the taskbar and even I am not able to reach below for cross arrows to pull the windows above. Though with Auto Hide taskbar, I am able to click these buttons but I am not liking this Auto Hide feature. Is there any other way out so that these windows could be permanently kept small size giving ample space both above and below these windows.
View 3 RepliesI upgraded to Win. 10 8/3. Everything seemed to work fine for 2 days. Then yesterday, the 5th, I could no longer scroll sites up or down by touching and moving my fingers up or down. The other touch functions still work, like going to links or sites, the 'click here' (touch here) options, close,etc. I can even scroll by touching the scroll bar and moving it up or down or right or left. My fingers don't scroll anymore unless they move the bar. And I just noticed areas on the sites don't get bigger or smaller with just fingers touching them and moving them farther apart either. But I don't know if that's supposed to happen. It did with Win 8.
View 9 Replies