Stop Booting Into Safe Mode - Without Laptop Screen
Dec 31, 2015
I have a Lenovo P580 laptop. The screen wire got shorted out, so I just always connected it to a TV and never really had a problem. I recently upgraded to Windows 10 from 8.1. After getting that issue with the start menu and cortana not working, I tried the make another profile, etc stuff from the internet. I changed my laptop to always load into safe mode using command prompt... NOW, every time it loads up, it loads into safe mode... only problem is I can't see it or do anything because the output for my tv doesn't work.
So... I bought a new wire for the laptop screen... nothing. Bought a new screen... nothing. So I assume the motherboard is damaged... The HDMI and VGA ports worked up till I set it to boot into safe mode...
Is there anything I can do? short of replacing the motherboard?
I am having a hard time trying to get back to normal mode. My external monitor vga driver was automatically turned off when computer restarted in safe mode. Now, I am working blind, I know there is a sequels of keys to press when computer starts up in order to return to normal mode.
Upon attempting to perform a fresh install of my display drivers using DDU, I somehow managed to permanently blue screen Windows 10 (Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED). So every time I try to boot into my OS, I get a constant blue screen of death, resulting in my computer to continuously restart and blue screen.
So now I'm trying to boot into safe mode from a cold boot, is there a way that I can access Advanced Options without requiring to boot into the OS itself?I'd like to create a recovery disk with a flashdrive, but I do not have an alternate computer that runs Windows 10, just a MacBook Pro
A couple days ago I used safe mode to fix a startup program causing a bsod. Possibly worth noting: I had to use a bootable Windows 10 USB, use the repair options, enter the "BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY" command, to then use F8 to access boot options and safe mode.
The problem I'm facing now is some other (not all, fortunately), unrelated programs (or apps or whatever MS feels it's trendy to call them) are showing up as if they were just installed. Anything that's user settings was reset.
I don't regularly use safe mode, so my questions are:
- Is safe mode known for resetting software to default/factory settings? - If yes, what would be an efficient way to prevent it? Maybe backup the relevant data and restore it after using safe mode? - If safe mode does not reset anything, what could have caused my settings to be lost in the Warp? Enabling the "legacy" (F8-friendly) boot shouldn't have anything to do with this... right?
Most notably, Launchy and BitTorrentSync were reset to "just installed" state. There might be more I just didn't run yet.
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
Okay, so I reserved my free copy of Windows 10 a few days ago, and tried to install this morning. It all seemed to be going smoothly... then everything disappeared, and I was left with a black screen for three hours. Finally in frustration I powered off and on again; The blue windows 10 logo appeared, and the loading wheel span for a few seconds, followed by the black screen again - no cursor or anything. I can't enter safe mode, either - it makes a really violent buzzing sound whenever I hit F8. I'm worried my laptop is irreparably damaged... I'm upgrading from Windows 7 on a Dell Inspiron laptop (or trying to).
I noted that I am not the first one who encounters a flashing screen after upgrading to Win10, managed to type the "msconfig" and now I am stuck in Safe mode with the system not accepting my password, which is a 4-digit PIN.
I installed Windows 10 on a MS Vista OS, Viao laptop about a month ago. Everything has been fine. I've been learning how to use Windows 10, and have been more or less happy with it.
On October 16, 1015, I booted the laptop just like I do every morning around 8:30 am. I got past the loading screen, got the Loading screen photo image, and then the login screen. I logged in, and got an alert that Windows 10 updates were available. Since I had 30 some minutes before I needed to actually USE the machine I told it to update. I clicked the update button, and Windows 10 partially logged me out to do the update. When windows restarted, I got past the loading screen, and got to the Login screen.
But after putting in my Windows credentials, I got a blue screen with a white circle progress indicator, and it sat like that for about 20 minutes.
I restarted by pressing the power button, but am now unable to even to the loading screen. As soon as I hear the "booting windows" sound, the blue screen with the white circle progress indicator comes up. I've tried this about 5 times, letting it sit for about 30 minutes each time.
I am trying to find a way to get into safe mode without the use of the "restart" function, but either that data doesn't exist or I am not using the correct search terms to find it.
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
Just installed Win10 on my 4 yr old HP G60535D. Now I have have to re-boot everytime I shut the lid. Played around with power settings, etc etc but no luck. When I first open the lid, I can hear the computer running, a slight mechanical burp of some sort, then nothing... totally blank screen. I have to hold the power button down to shut it off, then re-boot. A 1st world problem for sure, but kind of irritating.
I have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)
I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.
I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.
Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip
Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.
I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.
The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.
All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.
Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.
Due to there not being an F8 boot command screen any more I had to go into msconfig to change how the computer starts up.. which is now set to safe mode. So I'm in safe mode (on the other computer).. the problem is I cannot figure out how to reset it to start up in normal mode. The 'search windows' box at the bottom will not allow any text to be entered.. unless I can get to msconfig by looking for it in safe mode.. I'm stuck in safe mode. How to get to msconfig in safe mode without typing it in? again the msconfig was changed to have the computer start up in safe mode.. it's now doing it every time.. even after a system restore to 4 days ago.
I put my PC in safe mode but when I try to get out I can't I press the windows key and the R and then put msconfig. A window opens but it closes right after.
I knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.
I was having difficulty with flashing and went into safe mode to try to figure out which program was causing it but now whenever I reboot I am still in Safe Mode.
how it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...
Needed to boot in safe mode, used msconfig to set the boot mode. Of course I was not aware my pen number login is wothless so now I am stuck in perpetual safe login screen. My outlook password is in a program on the system which I cannot access.
Tried shift restart and tried startup settings and press enter, but this does not do a normal boot, just another safe mode. Where is the option for normal boot!?
I work in an education environment and these kids are very savvy. They have figured out how to put the computer in Safe Mode and make it impossible for me to track them. how to Disable Safe Mode?
I want to boot into safe mode but every time I try it crashes and shows BSOD Bad_Pool_Header. I've tried to boot it manually through system config. It still won't work.
My laptop was windows 7 and I have upgraded to windows 10. Over the past few weeks i've seen that some updates have failed, and I was going to try the product on this site , windows all in one, to try and find out the problem. so i followed the instructions for powering off, unplugging and removing battery to drain electricity, and then rebooted to "safe" level...and then.....i can't login from safe mode, it says password is incorrect, and i am unable to get OUT of safe level to sign in the regular way.
So, to log into your computer you have now to enter a PIN instead of a password, right? Well, that PIN is changed (or something similar) because I can't log in with the normal one.
