So I started my pc today and my window search didn't work anymore, just blank no results and everything felt very slow. so i restarted into safe mode without network and now it restarted asking for my windows login which is linked to my email. But i have no network so its not logging in. i have tried f8 when restarting but don't get any options to choose which boot mode you want as you could in windows 7.
I am trying to create usb windows 10 recover/install on my other laptop but its failing.
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
My laptop was windows 7 and I have upgraded to windows 10. Over the past few weeks i've seen that some updates have failed, and I was going to try the product on this site , windows all in one, to try and find out the problem. so i followed the instructions for powering off, unplugging and removing battery to drain electricity, and then rebooted to "safe" level...and then.....i can't login from safe mode, it says password is incorrect, and i am unable to get OUT of safe level to sign in the regular way.
Through msconfig I added safe boot with networking, however when I restart with F8 networking does not boot up. Took a while to even find how to get that far and then it didn't work right.
Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
At the moment I have a Local login and I am considering changing to a Microsoft login. If I do, does this mean that when my PC starts from a boot, that instead of the pin that I use to login to my account on the PC, I will be asked to login with both my Microsoft account username and password? If I make a mistake will I be locked out of my PC?
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
In the diagnostic startup mode there's no search so I can't run msconfig. Is there another way to do run this? I got to where I'm at now by running msconfig, staying on the general tab (not the boot), unchecking normal startup, then checking diagnostic. No matter what I've tried (including combing this forum and searching online) I still can't get out of diagnostic startup. There are other things going on with my PC, such as at least one virus, the Trojan Zeus Banker. I'd like to try a couple of more things before I put my PC in the shop and probably pay mucho dinero.
The upgrade to W10 has left me with a blue 'Welcome Back' screen and a 'Next' button. That's it! Clicking Next causes a reboot back to this screen. I cannot even open in safe mode and all boot options take me back to this screen.
I am running Windows 10 onmy HP Pavillion. I upgraded from Windows 7 around a month ago. Recently I was running a disk battery calibration check and after I restarted from that I get the message when I login that the "User Profile Failed the Logon. User Profile Cannot Be Loaded". From everything I have seen online it sounds the best method is to login under safe mode as an admin and either create a new user profile or repair the current one.
Now the problem is when I go to advanced startup options and select safe mode, it starts up but then asks me to login using one of my two accounts. Neither is the administrator as this doesn't show up for me. The current account that I am getting error obviously won't work under safe mode and the other account I don't remember the password. I inserted a travel/jump drive to try and change the PW on this but it wouldn't work. So basically I have no way of getting to start it up as an administrator. The local PC place said WIndows 10 has had known issues with this. However I had this problem happen with Windows 7 too so I am not sure.
After an update to Windows 10 I started getting "invalid register key" errors with every open. I restored a previous registry value prior to the last update and still go the error. Instructed to boot up in safe mode but as I logon using my microsoft account, safe mode does not open wifi connection and the password cannot be verified. At least I think that is what is happening as I reset my microsoft account password using another computer and it is still refusing the password on the windows 10 machine.Is there anyway around the password request and get the computer to boot up in regular mode?
I noted that I am not the first one who encounters a flashing screen after upgrading to Win10, managed to type the "msconfig" and now I am stuck in Safe mode with the system not accepting my password, which is a 4-digit PIN.
I knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.
I tried to boot into safe mode via msconfig then after restarts it showed BAD_POOL_HEADER and PAGE_FAULT_IN_NONPAGED_AREA. I've tried chkdsk and system recover. I don't want to Reset my laptop. S
Is there a way to boot into Win 10 in a safe mode? The reason I ask is I am having trouble in normal mode trying to get rid of my win.old file. It will let me delete some of it but not all. So maybe in safe mode I can delete it all or am I missing something here?
Currently, I have dual boot Win7 and Win10. And the only reason I have Win7 is because the drivers for a printer were not updated to Win10. Now recently HP did just that, and I no longer need Win7.
The way I have it set up is that I have Win7 on one partition, Win10 on another (100GB each) and the rest is Storage. Is it safe to simply remove and format the partition that has Win7 on it ?
I recently installed Windows 10 from 8.1 on my HP pavilion laptop (I got it just over a year ago, not sure the exact model). All I did was go through the free upgrade process.
Everything seemed to work fine in the first 24 hours, but now I encounter a blue screen with grey lines when I try to boot. Eventually, after a few attempts (on its own) at rebooting, I get to the repair/restore screen. System restore hasn't worked in the few times I've attempted it, and I can only boot up in safe mode without networking.
I have no media disc for Windows 10 or anything like that, and I'm relatively inept in programming.
In order to force a safe mode start in Widows 10, I used the msconfig command in the Run Box. I clicked the "networking" radio button; unfortunately, that UNCLICKED the "minimal" radio button. Now I am unable to boot into anything. I have created a Repair / Recovery Disc from a similar PC, but it does not work with my HP ENVY.
Upon attempting to perform a fresh install of my display drivers using DDU, I somehow managed to permanently blue screen Windows 10 (Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED). So every time I try to boot into my OS, I get a constant blue screen of death, resulting in my computer to continuously restart and blue screen.
So now I'm trying to boot into safe mode from a cold boot, is there a way that I can access Advanced Options without requiring to boot into the OS itself?I'd like to create a recovery disk with a flashdrive, but I do not have an alternate computer that runs Windows 10, just a MacBook Pro
I have a old windows 7 safe mode boot screen that migrated over to windows 10. I works on windows 10 but I don't need it any more so I want to get rid of it. I just don't want to mess up in removing it... I'm using this tutorial... Can't get rid of the dual-boot option on start-up ?
Every time I try to boot into safe mode or advanced options I get the same BSOD ERROR: CRITICAL_PROCESS_DIED.. Is there any other way for me to accomplish this?
Hp compaq running win 10 was running fine, but now won't load windows or even safe mode. I do get a blue screen message sometimes that reads BAD SYSTEM CONFIG ...
There was a storm and she said the machine froze also the HD is a Seagate and of course no backup ...
I have just upgraded from build 9926 to build 10041 and now I have s major problem with the login screen. It won't respond and no matter what I do with my mouse or keyboard it respond. The clock still changes however which us kinda strange. Here is a pic
